Name: SL POWER TCM-1000-24
Brand: SL POWER
SKU: TCM-1000-24

Description

SL Power/Condor Power TCM-1000-24 Power Supply with “Zero wire” slope program current sharing and 0.99 typical power factor

Part Number

TCM-1000-24

Price

Request Quote

Manufacturer

SL POWER

Lead Time

Request Quote

Category

Power Supply

Specifications

Ac Input

180-264 Vac, 47-63 Hz internally fused 10 A

Ac Power Fail

Provides TTL “0” 5 ms before output voltage goes out of regulation band upon loss of ac power

Adjustability

User adjustable ±5% minimum

Conducted RFI

Meets FCC Part 15, Class A; EN55022 Class B

Cooling

Self-cooled by internal ball-bearing fan

Current Sharing

As calibrated at factory, modules will share current within 10% of full rated load

Dc Power Good

Provides a TTL “0” open collector when output is above 90% of nominal. Maximum pull-up voltage 30 Vdc; maximum sink current, 10 mA

Efficiency

87% typical @ full load

Hold Up Time

20 ms minimum after removal of ac power at full load

Inrush

Limited by thermistor, 40 A maximum (8ms), cold start

Line Regulation

±0.2%

Load Regulation

±2% (Slope Program) from 0 to 100% load changes

Output Isolation

Isolated from ground 100 Vdc

Overload Protection

Electronic current limit, 120% maximum

Overvoltage Protection

Protects load against power supply induced overvoltage. Trip point is factory set so that output voltage cannot exceed 136% of nominal. Requires ac input to be cycled to reset

Power Factor

0.99 typical at full load. Meets EN61000-3.2 Class A

Redundancy

Built-in OR-ing diode, slope program current sharing, and DIN blade connector provide “hot swap” and “N+1” capabilities. Current sharing remains within 10% of the unit’s full output rating given 0.2% initial accuracy in the output voltage setting

Remote Inhibit

Contact closure or TTL “0” turns off output

Reverse Voltage

Protected against reverse voltage up to twice output voltage rating. (internal OR-ing diode)

Ripple & Noise

0.5% p-p, measured at 20 MHz bandwidth

Safety Agencies

Approved to UL1950; CSA 22.2 #950; IEC 950 and TUV EN60950, Class 1 SELV, CE 73/23/EEC//93/68/EEC (low voltage directive)

Stability

0.1% over 8 hours, under constant line, load and ambient

Temperature Coefficient

0.02% per °C

Temperature Range

-20° to +50°C, full power, de-rate to 66% maximum power @ 71°C

Thermal Protection

Shuts down power supply if overheated; Automatic recovery

Transient Response

Output voltage returns to within 1% in less than 500 µs for a 50% load change. Peak transient does not exceed 3%

Turn On Delay

1 second typical

Features

“Zero wire” slope program current sharing
0.99 typical power factor
Dc power good and ac power fail signals
Diode isolated output for hot swap
Extended temperature operation
High efficiency 87% typical (48 V units)
High power density 6.5 Watt/cu. in.
Industry standard DIN connector
Monotonic turn-on and turn-off
Operating temperature range -20°C to +60°C
True remote inhibit

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

SL POWER TCM-1000-24

Why buy from GID?

What they say about us

Related Products