Manufacturers
SL POWER RMX354-1205
Description
SL Power/Condor Power RMX354-1205 Power Supply. 350 Watt | Hot Swappable
Part Number
RMX354-1205
Price
Request Quote
Manufacturer
SL POWER
Lead Time
Request Quote
Category
Power Supply
Specifications
Ac Input
90-264 Vac continuous range, 47 to 63 Hz. Internally fused for 7A
Ac Power Fail
Provides TTL “0” 5 ms before output voltage goes out of regulation band upon loss of ac power
Adjustability
Outputs #1 and 2, and 4 factory adjusted to nominal ±0.2%. Output #3 tracks #2; initial accuracy ±3%
Brownout Protection
Holds regulation to 85 Vac
Conducted RFI
Meets FCC Part 15, Class A; EN55022 Class B
Cooling
Self-cooled by internal ball-bearing fan
DC Power Good
Provides a TTL “1” open collector when output #1 is above 4.6 V nominal
Efficiency
70% typical
Holdup Time
20 ms minimum after removal of power at full load
Inrush
Cold start ac current is less than 30 A at 115 Vac and 60 A at 230 Vac. Limited by thermistor
Line & Load Reg
Outputs #1, 2, and 4 hold ±2% over ac input range and 0 to 100% load change (preprogrammed slope). Output #3 requires 20% minimum load on outputs #2 and 3 to hold ±5%
Output Isolation
Isolated from ground 50 Vdc.
Overload Protection
All outputs are protected against over load and short circuit. Automatic recovery upon removal of fault
Overvoltage Protection (Outputs #1 and 2)
Protects load against power supply induced over voltage. Trip point is factory set so that output voltage cannot exceed 136% of nominal
Peak Output Current
Dual current ratings define continuous and peak currents. The peak current shown can be delivered for a maximum period of 30 seconds
Power Factor
0.99 typical at full load. Meets EN61000-3-2 Class A
Redundancy
Built-in OR-ing diodes, slope program current sharing on all outputs, and self aligning connector provide “hot swap” and “N+1” capabilities. Current sharing remains within 10% of the unit’s full output rating while units are in thermal equilibrium
Remote Enable
Contact closure to common turns on DC outputs (recessed pin for “make last, break first” connection)
Remote Inhibit
Contact closure to the negative sense line or a TTL level “0” turns off dc outputs
Reverse Voltage
Protected against reverse voltage up to supply current rating
Safety Agencies
Most models are approved to UL1950; CSA 22.2 #234; IEC 950 and TÃœV EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive)
Stability
0.1% over 8 hours after 30 minutes warm-up
Temperature Coefficient (Outputs #1, 2, and 4)
0.03% per degree C.
Temperature Range
0° to 50°C at full ratings
Thermal Protection
Shuts down power supply if overheated; Automatic recovery
Transient Response (Outputs #1, 2, and 4)
Output voltage returns to within 1% in less than 500 µs for a 50% load change (measured with rise time and fall time of 200µs). Peak transient does not exceed 5%
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the RMX354-1205?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
SL Power / Condor Power GLC110-212 Power Supply. Open Frame | Commercial | 110 W | 12V @ 6.3A, -12V ...
PWR SPLY SWITCHER 110W MULTI
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods