SL POWER GSM28-28
Specifications
Brand/Series
GSM28 Series
Configuration
Open-Frame
Current, Input
0.85 A
Current, Inrush
Maximum input current at 120 Vac, 60 Hz with full rated output load is 0.85 A.
Current, Leakage
25 uA (Max.) @ 120 VAC
Current, Output
1 A
Dimensions
4.00 in. L x 2.59 in. W x 0.92 in. H
Hold Time
15 ms minimum from loss of ac input at full load, nominal line (120 Vac).
Mounting Type
Panel
Noise, Output
0.5% rms, 1% pk-pk, 20 MHz bandwidth,
Number of Outputs
1
Operation
Switching
Output
28 VDC @ 1.0 A
Output Type
Single
Overvoltage Protection
34 ± 2.8 V
Power Rating
28 W
Power, Output
28 W
Primary Type
AC-DC
Standards
Approved to UL Listed 2601-1, EN60601-1, EMI to FCC, CISPR 11 Class B/IEC601-1-2, CE Marked to LVD
Type
Medical
Voltage, Input
85 to 264 VAC
Voltage, Output
28 VDC
Features
- Approved to UL2601-1, EN60601-1
- Compact size (4.00" x 2.59" x 0.92")
- EMI to FCC, CISPR 11 Class B/IEC601-1-2
- Industry’s smallest 28 W medically approved switcher
- Less than 25 µA leakage current @ 120 Vac
- Overvoltage protection standard
- Wide-range ac input: 85-264 Vac
Datasheet
Extracted Text
GSM28 Medical 28 Watt Global Performance Switchers FEATURES: Industry’s smallest 28 W medically approved switcher Compact size (4.00" x 2.59" x 0.92") Wide-range ac input: 85-264 Vac Less than 25 µA leakage current @ 120 Vac Approved to UL2601-1, EN60601-1 EMI to FCC, CISPR 11 Class B/IEC601-1-2 Overvoltage protection standard marked to LVD SPECIFICATIONS: Ac Input Temperature Coefficient 85-264 Vac, 47-63 Hz single phase. 0.03%/°C typical on all outputs. Input Current Environmental Maximum input current at 120 Vac, 60 Hz with full rated output Designed for 0 to 50°C operation at full rated output power; load is 0.85 A. derate output current and total output power by 2.5% per °C above 50°C. Hold-up Time 15 ms minimum from loss of ac input at full load, nominal line Medical EMI/EMC Compliance (120 Vac). All models include built-in EMI filtering to meet the following emissions requirements: Output Power EMI SPECIFICATIONS COMPLIANCE LEVEL Normal continuous output power is 28 W, 32 W peak for 60 s Conducted Emissions EN55011 Class B; FCC Class B maximum duration, 10% duty cycle. Factory set to begin power Static Discharge EN61000-4-2, 6 kV contact, 8 kV air limiting at approximately 35 W. RF Field Susceptibility EN61000-4-3, 3 V/meter Fast Transients/Bursts EN61000-4-4, 2 kV, 5 kHz Overload Protection Surge Susceptibility EN61000-4-5, 1 kV diff., 2 kV com. Fully protected against short circuit and output overload. Short circuit protection is cycling type power limit. Earth Leakage Current Leakage current measured in the Gnd wire connection when Output Noise measured per EN60601-1 or UL2601-1 is as follows: 0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential mode. Medical Normal SingleFault Test Test Measured with scope probe directly across output terminals of Model Leakage Leakage Voltage Method the power supply with load terminated with 0.1 uF capacitor. GA SM282A 54z 511 32Vac/60H UL2601- Overvoltage Protection GA SM285A 09z 021 64Vac/50H IEC60601- Built in with firing point set per ratings table. OVP firing reduces voltage to less than 50% of nominal voltage in 50 ms. Medical Medical Safety Voltage Adjustment Condor D.C. Power Supplies, Inc. declares under our sole Factory set with fixed resistors to maximize reliability. responsibility that all GSM models are in conformity with the applicable requirements of UL2601-1 Patient Care Equipment, Efficiency CSA-C22.2 No. 234 (with additional tests to C22.2 No. 601.1 70% minimum for the 5.1 V model at full rated load, nominal per T.I.L. CA-08), EN60601-1. input voltage. Efficiency increases as output voltage increases. Input Protection Internal ac fuse provided on all units. Designed to open only if a catastrophic failure occurs in the unit. Inrush Current Inrush limited by internal thermistor. The inrush at 230 Vac, averaged over the first ac half-cycle under cold start condi- tions will not exceed 32 A. Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 FAX 805-487-8911 www.condorpower.com 22 GSM28 Medical 28 Watt Single Output Medical Initial Setpoint Model Output Current Load Regulation Tolerance OVP Setpoint Ripple and Noise GSM28-5 5A .1 V 5% .5 0% .75 2V .56% .2 ± 0.6 1.4 GSM28-12 1A 2 V 2% .3 0% .75 2V .5 1% 4 ± 1.0 1 GSM28-15 1A 5 V 1% .9 0% .75 2V .51% 8.5 ± 1.5 1 GSM28-24 2A 4 V 1% .2 0% .75 2V .5 2% 8 ± 2.5 1 GSM28-28 2A 8 V 1% .0 0% .75 2V .5 3% 4 ± 2.8 1 GSM28 MECHANICAL SPECIFICATIONS Environmental Operating Non-operating Specification Temperature o S5 ee individual specs -40 to +8 C (A) HH umidity (A)0H to 95% R 0 to 95% R A. Units should be allowed to warm up/operate under non-condensing conditions Sg hock (B) 20 40 g before application of power. pk pk B. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to 2000Hz, 3 At ltitude-t 500 to 10,000 f -500 to 40,000 f orthogonal axes. Tested for 10 min./axis operating and 1 hr./axis non-operating. C. Shock testing—half-sinusoidal, 10 ± 3 ms duration, ± direction, 3 orthogonal axes, 2 2 Vg ibration (C) 1.5 , 0.003 g/g Hz 5 , 0.026 g /Hz total 6 shocks. rms rms Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 805-486-4565 FAX 805-487-8911 www.condorpower.com 23
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the GSM28-28?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods