GPC40 Commercial/GPM40 Medical 40 Watt Global Performance Switchers FEATURES: Wide-range ac input 85-264 Vac 2-year warranty Conducted EMI exceeds FCC Class B and CISPR 22 Class B (Commercial models) and CISPR 11 Class B (Medical models) Single and multiple outputs Commercial Approved to UL1950, EN60950 and CSA-C22.2 No. 950 Medical Approved to UL2601-1, IEC601-1 and CSA22.2 No. 601 Single and multiple outputs SPECIFICATIONS: marked to LVD Ac Input 85-264 Vac, 47-63 Hz single phase. Input Current Maximum input current at 120 Vac, 60 Hz with full rated Transient Response Main output—500 µs typical response time for return to output load: 1.3 A within 0.5% of final value for a 50% load step change. Δi/ Hold-Up Time Δt<0.2 A/µs. Maximum voltage deviation is 3.5%. Startup/ shutdown overshoot less than 3%. 20 ms minimum from loss of ac input at full load, nominal line (115 Vac). Remote Sense Output Power Provided as a standard feature on single-output models. 40 W continuous, 50 W peak. Peak ratings are for 60 s maximum duration, 10% duty cycle. During peak load Voltage Adjustment condition, output regulation may exceed total regulation Built-in potentiometer adjusts main output voltage ±5%. limits. EMI/EMC Compliance Overload Protection All models include built-in EMI filtering to meet the Fully protected against short circuit and output overload. following emissions requirements: EMI SPECIFICATIONS COMPLIANCE LEVEL Short circuit protection is cycling type power limit on outputs 1 & 2; foldback type on output 3. Recovery after Conducted Emissions EN55022 Class B; FCC Class B fault is automatic. See output ratings chart for additional Conducted Emissions EN55011 Class B; FCC Class B Static Discharge EN61000-4-2, 6 kV contact, 8 kV air notes or conditions. RF Field Susceptibility EN61000-4-3, 3 V/meter Overvoltage Protection Fast Transients/Bursts EN61000-4-4, 2 kV, 5 kHz Surge Susceptibility EN61000-4-5, 1 kV diff., 2 kV com. Main outputs: 124% ± 12% Efficiency Commercial Safety Approved to UL1950, CSA22.2 No. 234 Level 3, IEC950, 70% at full rated load, nominal input voltage, depending EN60950. UL1950, EN60950 and CSA-C22.2 No. 950. on model and load distribution. The output(s) are intended for safety earthed Signal Turn-on Time Output and Intermediate Circuits only. All dc outputs are SELV under normal and single fault conditions. Less than 1 second at 120 Vac, 25°C (inversely propor- tional to input voltage and thermistor temperature). Medical Leakage Current Input Protection The maximum leakage current is as follows: Internal ac fuse provided. Designed to blow only if a Test Condition Normal Single Fault catastrophic failure occurs in the unit. 120 Vac @ 60 Hz input 25 µA 35 µA Inrush Current 264 Vac @ 60 Hz input 40 µA 60 µA Inrush is limited by internal thermistors. Inrush at 240 Vac under cold start conditions will not exceed 34 A. Medical Safety Approved to UL2601-1, CSA22.2 No. 601 Level 3 Temperature Coefficient and IEC601-1. UL file E116994; CSA #LR46516. The 0.03%/°C typical on all outputs. output(s) are intended for safety earthed Signal Output and Intermediate Circuits only. The output(s) are not Environmental acceptable for patient connection without additional Designed for 0 to 50°C operation at full rated output isolation. All dc outputs are SELV under normal and power; derate output current and total output power by single fault conditions. 2.5% per °C above 50°C. Output Noise 0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential mode. Measured with noise probe directly across output terminals of the power supply. Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565  FAX 805-487-8911  www.condorpower.com 26 GPC40 Commercial/GPM40 Medical 40 Watt Multiple Output Commercial Medical Output Output Total Regulation Model Model Output No. Output Minimum Maximum Output Peak Noise P-P (A) Notes GPC40A GPM40A 1V+A 5.1 0A .4 4A5V5% 0 m 2 2V+A 12 0A2A3V1% 20 m 5C B, 3V-A 12 0A0A .4 0V .7 1% 20 m 3C GPC40B GPM40B 1V+A 5.1 0A .4 4A5V5% 0 m 2 2V+A 15 0A2A3V1% 50 m 5C B, 3V-A 15 0A0A .4 0V .7 1% 50 m 3C GPC40D GPM40D 1V+A 5.1 0A .4 4A5V5% 0 m 2 2V+A 24 0A1A1V .5 2% 40 m 5C B, 3V-A 12 0A0A .4 0V .7 1% 20 m 3C GPC40-3.3 GPM40-3.3 1V3A .3 0A8A1V 0 3% 5 m 2 GPC40-5 GPM40-5 1V5A0A8A1V 0 5% 0 m 2 GPC40-9 GPM40-9 1V9A0A4A .5 6V9% 0 m 2 GPC40-12 GPM40-12 1V1A 2 0A3A .3 4V .2 1% 20 m 2 GPC40-15 GPM40-15 1V1A 5 0A2A .7 3V .3 1% 50 m 2 GPC40-24 GPM40-24 1V2A 4 0A1A .7 2V .1 2% 40 m 2 GPC40-28 GPM40-28 1V2A 8 0A1A .4 1V .8 2% 80 m 2 Note: For 48 volt model, GPC40-48 or GPM40-48, contact factory for availability. A. T otal regulation is defined as the maximum deviation from the nominal voltage for all steady-state conditions of initial voltage setting, input line voltage and output load. B. T o maintain these regulation conditions, the 5.1V current must be at least 1/4 of V2 and not greater than 5 times the V2 current. C. Requires +5.1V to be adjusted within ±1% with at least a 0.4A load to maintain regulation on this output. GPC40/GPM40 MECHANICAL SPECIFICATIONS 3 3 Environmental Operating Non-operating Specification o Ts emperature (A)S5 ee individual spec -40 to +8 C A. Units should be allowed to warm up/operate under non-condensing conditions HH umidity (A)0H to 95% R 0 to 95% R before application of power. Sg hock (B) 20 40 g B. Random vibration—10 to 2000Hz, 6dB/octave roll-off from 350 to 2000Hz, 3 pk pk orthogonal axes. Tested for 10 min./axis operating and 1 hr./axis non-operating. At ltitude-t 500 to 10,000 f -500 to 40,000 f C. Shock testing—half-sinusoidal, 10 ± 3 ms duration, ± direction, 3 orthogonal axes, 2 2 Vg ibration (C) 1.5 , 0.003 g/g Hz 5 , 0.026 g /Hz total 6 shocks. rms rms Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929  805-486-4565  FAX 805-487-8911  www.condorpower.com 27