Manufacturers
RELIANCE ELECTRIC P14X3829
Description
Reliance Electric P14X3829 575 Volt Motors. HP: 1.5 | RPM: 1800 | Frame: 145T | Enclosure: TEFC | Product: XT | Efficiency Standard: EPAct C Dim: 13.66 | Eff. @ Full Load: 84 | Approx. Wt: 43
Part Number
P14X3829
Price
Request Quote
Manufacturer
RELIANCE ELECTRIC
Lead Time
Request Quote
Category
Motors
Datasheet
Extracted Text
Explosion Proof Washdown Duty Single Phase Brake Motor 575 Volt IEC 575 Volt Motors 575V Extra Tough - XT / XEX Totally Enclosed - IP54 Key Information Electrical Characteristics Phase: 3 Duty Cycle: Continuous Definitions: Frequency: 60 Hz Insulation: Class F XT = Extra Tough motors that meets EPAct efficiencies Ambient: 40° C Temp. Rise: Class B XEX = NEMA Premium Efficient motors that have Extra Tough Service Factor: 1.15 features Warranty (From Date Of Manufacture / From Date Of Installation): XT = (24 / 12) Application Information XEX = (36 / 24) Extra Tough Duty motors are built with the rugged cast iron Nameplate Agency Approvals: construction and key features for long life in moist, contaminated environments such as chemical plants, petroleum refineries and paper CE, CSA, UR, IEEE45 / ABS (10) mills. CONSTRUCTION FEATURES 56 - 140T Frames Materials: Non-Shaded M/N’s - Plated steel frame, conduit box and fan shroud, cast iron end shields Shaded M/N’s - Cast iron frame, conduit box, fan shroud and end shields Conduit Box: Oversized, Top mounted with F1 & F2 lead outlets. Bearing Type: Non-Shaded M/N’s - Double sealed, permanently lubricated ball bearings Shaded M/N’s - Doubled shielded regreasable ball bearings with grease relief fittings Bearing Protection: Non-Shaded M/N’s - Lip seals on both ends of the motor. Shaded M/N’s - Non-metalic V-ring shaft slinger on drive end. Shaft Material: High strength carbon steel Nameplate Material: Non-Shaded M/N’s - Adhesive Mylar, Shaded M/N’s - Stainless Steel Drain Type & Location: T-drain in drive end shield. Weep hole in opposite drive end shield on TEFC. TENV has T-drain both ends for Non-Shaded M/N’s. Additional Features: XT And XEX motors with a (♦) are inverter duty at 575 volts and below. Motor insulation is rated 1800 volts on 575 volt motors per NEMA MG1 part 31.40.4.2 180T - 449T Frames Materials: Cast Iron construction: frame, conduit box, fan cover, end shields and inner caps Conduit Box: F1 location, Diagonally split, neoprene gasketed, rotatable in 90 degree increments and NPT threaded lead hole. UL listed clamp type grounding lug in box. Bearing Type; Regreasable, open ball bearings with PLS. (180T - 449T frames) Bearing Protection: Non-metallic V-ring shaft slinger on drive end Shaft Material; High strength carbon steel Nameplate Material: Stainless steel Drain Type & Location; Stainless steel T-drains mounted in both end shields Additional Features; • The motor’s stator and rotor are completely epoxy coated for corrosion protection • Extra Tough motors are provided with alemite grease fittings for easy bearings maintenance • Silicone rubber sealed fits provide superior protection against contaminates entering the motor body • XT and XEX motors with a (♦) are inverter duty 575 volt and below. Motor insulation is rated 1800 volts on 575 volt motors per NEMA MG1 part 31.40.4.2 For additional product information, go to www.reliance.com M-103 575 Volt Motors 575V Extra Tough - XT / XEX Totally Enclosed - IP54 Foot Mounted 1/2 - 350HP Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim Full Load Wt. 1800 575 56 TENV XT ♦ P56X3844 $377 REM03 10.14 80 51 1/2 1800 575 143T TENV XEX Prem ♦ P14G7540 640 RXM03 11.68 84 50 79 1200 575 143T TENV XEX Prem ♦ P14G7541 793 RXM03 11.68 84 50 80 1800 575 56 TENV XT ♦ P56X3845 406 REM03 11.14 82.5 53 3/4 1800 575 143T TENV XEX Prem ♦ P14G7542 681 RXM03 11.68 86.5 50 79 1200 575 143T TENV XEX Prem ♦ P14G7543 810 RXM03 11.68 81.5 50 80 3600 575 143T TENV XEX NEMA Prem ♦ P14G7544 674 RXM03 11.68 87.5 50 79 1800 575 143T TEFC XT EPAct ♦ P14X3828 413 REM03 12.23 82.5 39 1 1800 575 143T TENV XEX NEMA Prem ♦ P14G7545 690 RXM03 11.68 86.5 50 80 1200 575 145T TEFC XEX NEMA Prem ♦ P14G7546 850 RXM03 16.04 82.5 50 82 3600 575 143T TEFC XEX NEMA Prem ♦ P14G7547 760 RXM03 11.68 87.5 50 80 1800 575 145T TEFC XT EPAct ♦ P14X3829 430 REM03 13.66 84 43 1.5 1800 575 145T TEFC XEX NEMA Prem ♦ P14G7548 734 RXM03 16.04 87.5 50 81 1200 575 182T TEFC XEX NEMA Prem ♦ P18G3411 604 RXE22 15.62 87.5 105 3600 575 145T TEFC XEX NEMA Prem ♦ P14G7549 842 RXM03 16.04 87.5 50 81 ♦ 1800 575 145T TEFC XT EPAct P14X3830 391 REM03 14.29 84 51 2 1800 575 145T TEFC XEX NEMA Prem ♦ P14G7550 779 RXM03 16.04 87.5 50 82 1200 575 L184T TEFC XEX NEMA Prem ♦ P18G3390 675 RXE22 17.12 88.5 120 ♦ 3600 575 182T TEFC XT EPAct P18G4702 555 REM22 15.62 85.5 110 3600 575 182T TEFC XEX NEMA Prem ♦ P18G3391 600 RXE22 15.62 88.5 105 1800 575 182T TEFC XT EPAct ♦ P18G4752 565 REM22 15.62 87.5 110 3 1800 575 L182T TEFC XEX NEMA Prem ♦ P18G3373 583 RXE22 17.12 89.5 105 1200 575 213T TEFC XT EPAct ♦ P21G4852 815 REM22 19.3 87.5 160 1200 575 213T TEFC XEX NEMA Prem ♦ P21G3353 820 RXE22 19.3 89.5 160 3600 575 184T TEFC XT EPAct ♦ P18G4703 707 REM22 15.62 87.5 120 3600 575 184T TEFC XEX NEMA Prem ♦ P18G3392 712 RXE22 15.62 88.5 120 1800 575 184T TEFC XT EPAct ♦ P18G4753 662 REM22 15.62 87.5 120 5 1800 575 L184T TEFC XEX NEMA Prem ♦ P18G3374 684 RXE22 17.12 89.5 120 1200 575 215T TEFC XT EPAct ♦ P21G4853 1,160 REM22 19.3 87.5 175 1200 575 L215T TEFC XEX NEMA Prem ♦ P21G3354 1,165 RXE22 20.19 89.5 175 900 575 254T TEFC XEX Prem ♦ P25G493 1,917 RXE22 24.56 89.5 310 3600 575 213T TEFC XT EPAct ♦ P21G4702 925 REM22 19.3 88.5 160 3600 575 213T TEFC XEX NEMA Prem ♦ P21G3355 930 RXE22 19.3 90.2 160 1800 575 213T TEFC XT EPAct ♦ P21G4752 894 REM22 19.3 89.5 160 7.5 1800 575 213T TEFC XEX NEMA Prem ♦ P21G3336 924 RXE22 19.3 91.7 160 1200 575 254T TEFC XT EPAct ♦ P25G4656 1,542 REM22 24.56 89.7 310 1200 575 254T TEFC XEX NEMA Prem ♦ P25G3322 1,547 RXE22 24.56 91 310 900 575 256T TEFC XEX Prem ♦ P25G494 2,423 RXE22 24.56 90.2 345 3600 575 215T TEFC XT EPAct ♦ P21G4703 1,085 REM22 19.31 89.5 185 3600 575 215T TEFC XEX NEMA Prem ♦ P21G3356 1,090 RXE22 19.3 91 185 1800 575 215T TEFC XT EPAct ♦ P21G4753 998 REM22 19.31 89.5 185 10 1800 575 L215T TEFC XEX NEMA Prem ♦ P21G3337 1,031 RXE22 20.19 91.7 185 1200 575 256T TEFC XT EPAct ♦ P25G4657 1,893 REM22 24.56 89.5 345 1200 575 256T TEFC XEX NEMA Prem ♦ P25G3323 1,898 RXE22 24.56 91 345 ♦ 900 575 284T TEFC XEX Prem P28G489 2,828 RXE22 27.44 90.2 400 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers For pricing information or to place orders, go to www.PTplace.com M-104 IEC 575 Volt Brake Motor Single Phase Washdown Duty Explosion Proof Explosion Proof Washdown Duty Single Phase Brake Motor 575 Volt IEC 575 Volt Motors 575V Extra Tough - XT / XEX Totally Enclosed - IP54 Foot Mounted 1/2 - 350HP Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim Full Load Wt. 3600 575 254T TEFC XT EPAct ♦ P25G4506 $1,491 REM22 24.56 90.2 280 3600 575 254T TEFC XEX NEMA Prem ♦ P25G405 1,496 RXE22 24.56 91.7 310 1800 575 254T TEFC XT EPAct ♦ P25G4556 1,371 REM22 24.56 91.3 310 15 1800 575 254T TEFC XEX NEMA Prem ♦ P25G3318 1,418 RXE22 24.56 92.4 310 1200 575 284T TEFC XEX NEMA Prem ♦ P28G3321 2,525 RXE22 27.44 92.4 400 900 575 286T TEFC XEX Prem ♦ P28G490 3,684 RXE22 27.44 90.2 420 3600 575 256T TEFC XT EPAct ♦ P25G4507 1,796 REM22 24.56 90.2 315 3600 575 256T TEFC XEX NEMA Prem ♦ P25G406 1,801 RXE22 24.56 91.7 345 1800 575 256T TEFC XT EPAct ♦ P25G4557 1,638 REM22 24.56 91.4 345 20 1800 575 256T TEFC XEX NEMA Prem ♦ P25G3319 1,694 RXE22 24.56 93 345 1200 575 286T TEFC XEX NEMA Prem ♦ P28G3322 3,133 RXE22 27.44 92.4 420 900 575 324T TEFC XEX Prem ♦ P32G471 4,504 RXE22 30.44 91 530 3600 575 284TS TEFC XT EPAct ♦ P28G4506 2,090 REM22 26.06 91 380 3600 575 284TS TEFC XEX NEMA Prem ♦ P28G401 2,256 RXE22 26.06 93 425 25 1800 575 284T TEFC XT EPAct ♦ P28G4556 2,003 REM22 27.44 92.4 425 ♦ 1800 575 284T TEFC XEX NEMA Prem P28G3317 2,162 RXE22 27.44 93.6 425 1200 575 324T TEFC XEX NEMA Prem ♦ P32G3329 3,668 RXE22 30.44 93 530 3600 575 286TS TEFC XT EPAct ♦ P28G4507 2,455 REM22 26.06 91 415 ♦ 3600 575 286TS TEFC XEX NEMA Prem P28G402 2,653 RXE22 26.06 93 453 30 1800 575 286T TEFC XT EPAct ♦ P28G4557 2,336 REM22 27.44 92.7 455 1800 575 286T TEFC XEX NEMA Prem ♦ P28G3318 2,525 RXE22 27.44 93.6 455 1200 575 326T TEFC XEX NEMA Prem ♦ P32G3330 4,184 RXE22 30.44 93.6 560 3600 575 324TS TEFC XEX NEMA Prem ♦ P32G401 3,301 RXE22 28.94 94.1 537 1800 575 324T TEFC XT EPAct ♦ P32G4556 3,027 REM22 30.44 93.2 540 40 1800 575 324T TEFC XEX NEMA Prem ♦ P32G3325 3,272 RXE22 30.44 94.1 540 1200 575 364T TEFC XEX NEMA Prem ♦ P36G3316 5,771 RXE22 33.44 94.1 865 3600 575 326TS TEFC XEX NEMA Prem ♦ P32G402 4,223 RXE22 28.94 94.1 607 1800 575 326T TEFC XT EPAct ♦ P32G4557 3,546 REM22 30.44 93 560 50 1800 575 326T TEFC XEX NEMA Prem ♦ P32G3326 3,836 RXE22 30.44 94.5 610 1200 575 365T TEFC XEX NEMA Prem ♦ P36G3317 6,700 RXE22 33.44 94.1 890 3600 575 364TS TEFC XEX NEMA Prem ♦ P36G403 5,877 RXE22 31.31 95 844 60 1800 575 364T TEFC XEX NEMA Prem ♦ P36G3312 5,755 RXE22 33.44 95 865 1200 575 404T TEFC XEX NEMA Prem ♦ P40G275 7,794 RXE22 38.31 95 1220 3600 575 365TS TEFC XEX NEMA Prem ♦ P36G404 7,215 RXE22 31.31 95 884 75 1800 575 365T TEFC XEX NEMA Prem ♦ P36G3313 6,977 RXE22 33.44 95.4 890 1200 575 405T TEFC XEX NEMA Prem ♦ P40G277 8,664 RXE22 38.31 95 1260 3600 575 405TS TEFC XEX NEMA Prem ♦ P40G271 9,342 RXE22 35.31 95 1260 100 1800 575 405T TEFC XEX NEMA Prem ♦ P40G273 8,617 RXE22 38.31 95.4 1260 1200 575 444T TEFC XEX NEMA Prem ♦ P44G495 11,669 RXE22 44.62 95 1670 3600 575 444TS TEFC XEX NEMA Prem ♦ P44G752 12,203 RXE22 40.88 95.4 1654 125 1800 575 444T TEFC XEX NEMA Prem ♦ P44G617 11,337 RXE22 44.62 95.8 1670 1200 575 445T TEFC XEX NEMA Prem ♦ P44G496 14,057 RXE22 44.62 95.4 1860 3600 575 445TS TEFC XEX NEMA Prem ♦ P44G753 $14,674 RXE22 40.88 96.2 1844 150 1800 575 445T TEFC XEX NEMA Prem ♦ P44G618 13,190 RXE22 44.62 96.2 1860 ♦ 1200 575 447T TEFC XEX NEMA Prem P44G5207 17,030 RXE22 48.4 96.2 5 2110 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers For additional product information, go to www.reliance.com M-105 575 Volt Motors 575V Extra Tough - XT / XEX Totally Enclosed - IP54 Foot Mounted 1/2 - 350HP Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim Full Load Wt. 3600 575 445TS TEFC XEX NEMA Prem ♦ P44G5663 18,577 RXE22 40.88 96.2 1844 1800 575 447T TEFC XEX NEMA Prem ♦ P44G5206 16,545 RXE22 48.4 96.2 5 2400 200 1800 575 447T TEFC XEX NEMA Prem ♦ P44G5212 16,545 RXE22 48.4 96.2 2400 1200 575 447T TEFC XEX NEMA Prem ♦ P44G5213 19,053 RXE22 48.4 95.8 2400 1200 575 449T TEFC XEX NEMA Prem ♦ P44G5208 19,053 RXE22 53.4 96.2 5 2590 3600 575 447TS TEFC XEX NEMA Prem ♦ P44G5243 23,935 RXE22 44.65 96.2 2550 250 1800 575 449T TEFC XEX NEMA Prem ♦ P44G5246 19,347 RXE22 53.4 96.2 2500 1200 575 449T TEFC XEX NEMA Prem ♦ P44G5249 24,602 RXE22 53.4 96.2 5 2500 3600 575 449TS TEFC XEX NEMA Prem ♦ P44G5244 29,681 RXE22 49.65 95.8 2500 300 1800 575 449T TEFC XEX NEMA Prem ♦ P44G5247 22,654 RXE22 53.4 96.5 2500 3600 575 449TS TEFC XEX NEMA Prem ♦ P44G5245 33,470 RXE22 49.65 96.2 2500 350 1800 575 449T TEFC XEX NEMA Prem ♦ P44G5248 26,359 RXE22 53.4 96.2 2500 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers C-Face Footless 1/2 - 2 HP Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim Full Load Wt. 1/2 1800 575 56C TENV XT ♦ P56X3846 $388 REM03 10.45 80 33 3/4 1800 575 56C TENV XT ♦ P56X3847 416 REM03 11.45 82.5 39 1 1800 575 143TC TEFC XT EPAct ♦ P14X3831 424 REM03 13.22 82.5 42 1.5 1800 575 145TC TEFC XT EPAct ♦ P14X3832 440 REM03 13.65 84 41 2 1800 575 145TC TEFC XT EPAct ♦ P14X3833 470 REM03 14.28 84 43 ♦ - Inverter Duty. See page M-273 CC049A – “EPAct” and “NEMA Prem” model numbers For pricing information or to place orders, go to www.PTplace.com M-106 IEC 575 Volt Brake Motor Single Phase Washdown Duty Explosion Proof
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the P14X3829?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods