Manufacturers
RELIANCE ELECTRIC P14H1750
Description
Reliance Electric P14H1750 575 Volt Motors. HP: 2 | RPM: 1800 | Frame: 145TC | Enclosure: TEFC | Product: Std. | Efficiency Standard: C Dim: 13.6 | Eff. @ Full Load: 81.8 | Approx. Wt: 39
Part Number
P14H1750
Price
Request Quote
Manufacturer
RELIANCE ELECTRIC
Lead Time
Request Quote
Category
Motors
Datasheet
Extracted Text
Explosion Proof Washdown Duty Single Phase Brake Motor 575 Volt IEC 575 Volt Motors 575V Standard Motors - Sabre / Calibre / XE Totally Enclosed - IP44 Key Information Electrical Characteristics Phase: 3 Duty Cycle: Continuous Definitions: Frequency: 60 Hz Insulation: Class F Sabre = Steel frame Motors that meet or exceed EPAct Efficiency Ambient: 40° C Temp. Rise: Class B levels Service Factor: 1.15 Calibre = Cast Iron frame Motors that meet or exceed EPAct Efficiency levels XE = Premium Efficient motors that meet or exceed NEMA Premium efficiency levels Application Information: Warranty (From Date Of Manufacture / From Date Of Installation): Designed for all general purpose industrial applications in a dusty, dirty Standard/ Sabre/Calibre(24 / 12), XE (36 / 24) and/or humid environment. Enclosed motors reduce the exchange of air Nameplate Agency Approvals: between the inside and the outside of the motor. CE, CSA, UL (UR) Construction Features 48 - 140T Frames Materials: Steel frame, conduit box, and fan shroud; cast aluminum end shields. Shaded ratings have cast iron frames and end shields: steel conduit box and fan shroud. Conduit Box: Oversized, top mounted with F1 & F2 lead outlets Bearing Type: Double shielded ball bearings Bearing Protection: Permanently lubricated with moisture resistant grease Shaft Material: High strength carbon steel Nameplate Material: Adhesive Mylar. Shaded ratings - Stainless Steel Drain Type & Location: Weep hole in both end shields Additional Features: XE motors with a (♦) are inverter duty 575 volt and below. Motor insulation is rated 1800 volts on 575 volt motors per NEMA MG1 part 31.40.4.2 180T- 449T Frames Materials: Calibre: Cast iron frame and endshields , steel conduit box and fan shroud (180-280) . Cast iron fan shroud and conduit box (320-440) XE: Cast Iron frame and end shields; steel fan shroud and conduit box Conduit Box: F1 location, diagonally split, rotatable in 90 degree increments Bearing Type: Permanently lubricated, single shielded ball bearings (180T-210T frames); re-greasable, ball bearings with PLS (250T-449T frames). Bearing Protection: Shaft slinger on drive end Shaft Material: High strength carbon steel Nameplate Material: Stainless steel Drain Type & Location: Weep holes in both end shields Additional Features: Calibre and XE motors with a (♦) are inverter duty 575 volt and below. Motor insulation is rated 1800 volts on 575 volt motors per NEMA MG1 part 31.40.4.2 For additional product information, go to www.reliance.com M-97 575 Volt Motors 575V Standard Motors - Sabre / Calibre / XE Totally Enclosed - IP44 Foot Mounted 1/3 - 350 HP Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim. Full Load Wt. (lb) 1/3 1800 575 48 TENV Std. P48H1601 $259 REM20 9.07 74.9 18 1/2 1800 575 56 TENV Std. P56H1602 289 REM20 11.24 74.3 23 1800 575 56 TEFC Std. P56H1601 249 REM20 11.24 75.2 26 3/4 1200 575 143T TEFC XE Prem ♦ P14G7643 650 RXE20 12.05 81.5 50 65 3600 575 143T TEFC XE NEMA Prem ♦ P14X9100 466 RXE20 12.05 87.5 50 63 1800 575 143T TEFC Std. P14H1703 289 REM20 12.55 73.7 29 1 1800 575 145T TEFC XE NEMA Prem ♦ P14X9101 526 RXE20 12.05 86.5 50 64 1200 575 145T TEFC Std. P14H1708 417 REM20 12.55 74 34 1200 575 145T TEFC XE NEMA Prem ♦ P14G7646 670 RXE20 12.05 82.5 50 67 3600 575 143T TEFC XE NEMA Prem ♦ P14G7647 635 RXE20 12.05 87.5 50 65 1800 575 145T TEFC Std. P14H1702 294 REM20 12.55 78.5 36 1.5 1800 575 145T TEFC XE NEMA Prem ♦ P14G7648 600 RXE20 12.05 87.5 50 66 1200 575 182T TEFC CALIBRE EPAct ♦ P18G4652 468 RTT20 15.62 85.5 110 1200 575 182T TEFC XE NEMA Prem ♦ P18G3825 687 RXE20 15.62 87.5 110 3600 575 145T TEFC XE NEMA Prem ♦ P14G7649 650 RXE20 12.05 87.5 50 66 1800 575 145T TEFC Std. P14H1701 310 REM20 13.61 81.8 40 1800 575 145T TEFC XE NEMA Prem ♦ P14G7650 610 RXE20 12.05 87.5 50 67 2 ♦ 1800 575 145T TEFC XE NEMA Prem P14X1507 566 RXE20 14.61 87.5 49 1200 575 184T TEFC CALIBRE EPAct ♦ P18G4653 533 RTT20 15.62 86.5 120 1200 575 L184T TEFC XE NEMA Prem ♦ P18G3826 785 RXE20 17.12 88.5 115 3600 575 182T TEFC CALIBRE EPAct ♦ P18G4922 c 464 RTT20 14.43 85.5 7,9 110 3600 575 182T TEFC CALIBRE EPAct ♦ P18G4502 464 RTT20 15.62 85.5 110 3600 575 182T TEFC XE NEMA Prem ♦ P18G3821 670 RXE20 15.62 88.5 110 1800 575 182T TEFC CALIBRE EPAct ♦ P18G4920 c 429 RTT20 14.43 87.5 7,9 110 3 1800 575 182T TEFC CALIBRE EPAct ♦ P18G4552 429 RTT20 15.62 87.5 110 1800 575 182T TEFC XE NEMA Prem ♦ P18G3823 619 RXE20 15.62 89.5 110 1200 575 213T TEFC CALIBRE EPAct ♦ P21G4918 c 625 RTT20 17.94 87.5 7,9 162 1200 575 213T TEFC CALIBRE EPAct ♦ P21G4652 625 RTT20 19.25 87.5 160 1200 575 213T TEFC XE NEMA Prem ♦ P21G3824 918 RXE20 19.25 89.5 170 3600 575 184T TEFC CALIBRE EPAct ♦ P18G4923 c 567 RTT20 15.42 87.5 7,9 120 3600 575 184T TEFC CALIBRE EPAct ♦ P18G4503 567 RTT20 15.62 87.5 120 3600 575 184T TEFC XE NEMA Prem ♦ P18G3822 820 RXE20 15.62 88.5 115 1800 575 184T TEFC CALIBRE EPAct ♦ P18G4921 c 518 RTT20 15.42 87.5 7,9 120 5 1800 575 184T TEFC CALIBRE EPAct ♦ P18G4553 518 RTT20 15.62 87.5 120 1800 575 L184T TEFC XE NEMA Prem ♦ P18G3824 749 RXE20 17.12 89.5 115 1200 575 215T TEFC CALIBRE EPAct ♦ P21G4919 c 944 RTT20 19.43 87.5 7,9 185 1200 575 215T TEFC CALIBRE EPAct ♦ P21G4653 944 RTT20 19.25 87.5 185 1200 575 L215T TEFC XE NEMA Prem ♦ P21G3825 1,389 RXE20 20.12 89.5 180 3600 575 213T TEFC CALIBRE EPAct ♦ P21G4922 c 726 RTT20 17.94 88.5 7,9 170 3600 575 213T TEFC CALIBRE EPAct ♦ P21G4502 726 RTT20 19.25 88.5 170 3600 575 213T TEFC XE NEMA Prem ♦ P21G3820 1,050 RXE20 19.25 90.2 170 1800 575 213T TEFC CALIBRE EPAct ♦ P21G4920 c 689 RTT20 17.94 89.5 7,9 170 7.5 1800 575 213T TEFC CALIBRE EPAct ♦ P21G4552 689 RTT20 19.25 89.5 170 ♦ 1800 575 213T TEFC XE NEMA Prem P21G3822 994 RXE20 19.25 91.7 165 1200 575 254T TEFC CALIBRE EPAct ♦ P25G4920 c 1,362 RTT20 23.4 89.5 7,9 280 1200 575 254T TEFC CALIBRE EPAct ♦ P25G4652 1,362 RTT20 24.56 89.5 280 ♦ 1200 575 254T TEFC XE NEMA Prem P25G468 1,840 RXE20 24.56 91 280 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers without suffixes CC019A – model numbers with suffix For pricing information or to place orders, go to www.PTplace.com M-98 IEC 575 Volt Brake Motor Single Phase Washdown Duty Explosion Proof Explosion Proof Washdown Duty Single Phase Brake Motor 575 Volt IEC 575 Volt Motors 575V Standard Motors - Sabre / Calibre / XE Totally Enclosed - IP44 Foot Mounted 1/3 - 350 HP con’t Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim. Full Load Wt. (lb) 3600 575 215T TEFC CALIBRE EPAct ♦ P21G4923 c $875 RTT20 19.43 89.5 7,9 185 3600 575 215T TEFC CALIBRE EPAct ♦ P21G4503 875 RTT20 19.25 89.5 185 3600 575 215T TEFC XE NEMA Prem ♦ P21G3821 1,265 RXE20 19.25 91 180 1800 575 215T TEFC CALIBRE EPAct ♦ P21G4921 c 784 RTT20 19.43 89.5 7,9 185 10 1800 575 215T TEFC CALIBRE EPAct ♦ P21G4553 784 RTT20 19.25 89.5 185 1800 575 L215T TEFC XE NEMA Prem ♦ P21G3823 1,131 RXE20 20.12 91.7 180 1200 575 256T TEFC CALIBRE EPAct ♦ P25G4921 c 1,716 RTT20 25.1 89.5 7,9 315 1200 575 256T TEFC CALIBRE EPAct ♦ P25G4653 1,716 RTT20 24.56 89.5 315 1200 575 256T TEFC XE NEMA Prem ♦ P25G469 2,318 RXE20 24.56 91 315 3600 575 254T TEFC CALIBRE EPAct ♦ P25G4924 c 1,310 RTT20 23.4 90.2 7,9 280 3600 575 254T TEFC CALIBRE EPAct ♦ P25G4504 1,310 RTT20 23.4 90.2 280 3600 575 254T TEFC XE NEMA Prem ♦ P25G413 2,012 RXE20 24.56 91.7 280 1800 575 254T TEFC CALIBRE EPAct ♦ P25G4922 c 1,176 RTT20 23.4 91 7,9 280 15 1800 575 254T TEFC CALIBRE EPAct ♦ P25G4552 1,176 RTT20 24.56 91 280 1800 575 254T TEFC XE NEMA Prem ♦ P25G3363 1,560 RXE20 24.56 92.4 280 1200 575 284T TEFC CALIBRE EPAct ♦ P28G4918 c 2,110 RTT20 26.9 90.2 7,9 380 1200 575 284T TEFC CALIBRE EPAct ♦ P28G4654 2,110 RTT20 27.44 90.2 380 ♦ 1200 575 284T TEFC XE NEMA Prem P28G468 2,931 RXE20 27.44 92.4 380 3600 575 256T TEFC CALIBRE EPAct ♦ P25G4925 c 1,618 RTT20 25.1 90.2 7,9 315 3600 575 256T TEFC CALIBRE EPAct ♦ P25G4505 1,618 RTT20 24.56 90.2 315 3600 575 256T TEFC XE NEMA Prem ♦ P25G414 2,147 RXE20 24.56 91.7 315 1800 575 256T TEFC CALIBRE EPAct ♦ P25G4923 c 1,443 RTT20 25.1 91 7,9 315 20 1800 575 256T TEFC CALIBRE EPAct ♦ P25G4553 1,443 RTT20 24.56 91 315 1800 575 256T TEFC XE NEMA Prem ♦ P25G3364 1,913 RXE20 24.56 93 315 1200 575 286T TEFC CALIBRE EPAct ♦ P28G4919 c 2,624 RTT20 28.4 90.2 7,9 360 1200 575 286T TEFC CALIBRE EPAct ♦ P28G4655 2,624 RTT20 27.44 90.2 415 1200 575 286T TEFC XE NEMA Prem ♦ P28G469 3,733 RXE20 27.44 92.4 415 3600 575 284TS TEFC CALIBRE EPAct ♦ P28G4922 c 1,864 RTT20 25.53 91 7,9 380 3600 575 284TS TEFC CALIBRE EPAct ♦ P28G4504 1,864 RTT20 26.06 91 380 3600 575 284TS TEFC XE NEMA Prem ♦ P28G403 2,716 RXE20 26.06 93 378 1800 575 284T TEFC CALIBRE EPAct ♦ P28G4920 c 1,777 RTT20 26.9 92.4 7,9 380 25 1800 575 284T TEFC CALIBRE EPAct ♦ P28G4552 1,777 RTT20 27.44 92.4 380 1800 575 284T TEFC XE NEMA Prem ♦ P28G3371 2,472 RXE20 27.44 93.6 380 1200 575 324T TEFC CALIBRE EPAct ♦ P32G4918 c 3,123 RTT20 27.82 91.7 7,9 490 1200 575 324T TEFC CALIBRE EPAct ♦ P32G4654 3,123 RTT20 27.82 91.7 490 1200 575 324T TEFC XE NEMA Prem ♦ P32G469 4,221 RXE20 30.44 93 490 3600 575 286TS TEFC CALIBRE EPAct ♦ P28G4923 c 2,229 RTT20 27.03 91 7,9 415 3600 575 286TS TEFC CALIBRE EPAct ♦ P28G4505 2,229 RTT20 26.06 91 415 3600 575 286TS TEFC XE NEMA Prem ♦ P28G404 3,123 RXE20 26.06 93 413 1800 575 286T TEFC CALIBRE EPAct ♦ P28G4921 c 2,110 RTT20 28.4 92.4 7,9 415 30 1800 575 286T TEFC CALIBRE EPAct ♦ P28G4553 2,110 RTT20 27.44 92.4 415 1800 575 286T TEFC XE NEMA Prem ♦ P28G3372 2,934 RXE20 27.44 93.6 415 1200 575 326T TEFC CALIBRE EPAct ♦ P32G4919 c 3,599 RTT20 31.32 91.7 7,9 560 ♦ 1200 575 326T TEFC CALIBRE EPAct P32G4655 3,599 RTT20 30.44 91.7 560 1200 575 326T TEFC XE NEMA Prem ♦ P32G470 4,861 RXE20 30.44 93.6 560 3600 575 324TS TEFC CALIBRE EPAct ♦ P32G4922 c 2,786 RTT20 26.32 91.7 7,9 490 ♦ 3600 575 324TS TEFC XE NEMA Prem P32G403 3,763 RXE20 28.94 94.1 487 3600 575 324TS TEFC CALIBRE EPAct ♦ P32G4504 2,786 RTT20 28.94 91.7 586 1800 575 324T TEFC CALIBRE EPAct ♦ P32G4920 c 2,760 RTT20 27.82 93 7,9 490 40 1800 575 324T TEFC XE NEMA Prem ♦ P32G3381 3,729 RXE20 30.44 94.1 490 1800 575 324T TEFC CALIBRE EPAct ♦ P32G4552 2,760 RTT20 33.44 93 580 1200 575 364T TEFC CALIBRE EPAct ♦ P36G4918 c 4,841 RTT20 32.54 93 7,9 800 1200 575 364T TEFC XE NEMA Prem ♦ P36G468 6,541 RXE20 33.44 94.1 800 1200 575 364T TEFC CALIBRE EPAct ♦ P36G4654 4,841 RTT20 33.44 93 800 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers without suffixes CC019A – model numbers with suffix For additional product information, go to www.reliance.com M-99 575 Volt Motors 575V Standard Motors - Sabre / Calibre / XE Totally Enclosed - IP44 Foot Mounted 1/3 - 350 HP con’t Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim. Full Load Wt. (lb) 3600 575 326TS TEFC CALIBRE EPAct ♦ P32G4923 c $3,634 RTT20 27.82 92.4 7,9 560 3600 575 326TS TEFC XE NEMA Prem ♦ P32G404 4,908 RXE20 28.94 94.1 557 3600 575 326TS TEFC CALIBRE EPAct ♦ P32G4505 3,634 RTT20 30.44 92.4 650 1800 575 326T TEFC CALIBRE EPAct ♦ P32G4921 c 2,898 RTT20 31.32 93 7,9 722 50 1800 575 326T TEFC XE NEMA Prem ♦ P32G3382 4,430 RXE20 30.44 94.5 560 1800 575 326T TEFC CALIBRE EPAct ♦ P32G4553 2,898 RTT20 33.44 93 650 1200 575 365T TEFC CALIBRE EPAct ♦ P36G4919 c 5,697 RTT20 33.44 93 7,9 840 1200 575 365T TEFC XE NEMA Prem ♦ P36G469 7,695 RXE20 33.44 94.1 840 1200 575 365T TEFC CALIBRE EPAct ♦ P36G4655 5,697 RTT20 33.44 93 900 3600 575 364TS TEFC CALIBRE EPAct ♦ P36G4504 5,739 RTT20 31.31 93 800 3600 575 364TS TEFC XE NEMA Prem ♦ P36G405 6,672 RXE20 31.31 95 794 1800 575 364T TEFC CALIBRE EPAct ♦ P36G4554 5,609 RTT20 33.44 93.6 800 60 1800 575 364T TEFC XE NEMA Prem ♦ P36G3336 6,520 RXE20 33.44 95 800 1200 575 404T TEFC CALIBRE EPAct ♦ P40G4654 7,604 RTT20 38.31 93.6 1120 1200 575 404T TEFC XE NEMA Prem ♦ P40G488 8,841 RXE20 38.31 95 1120 3600 575 365TS TEFC CALIBRE EPAct ♦ P36G4505 7,169 RTT20 31.31 93 840 3600 575 365TS TEFC XE NEMA Prem ♦ P36G406 8,336 RXE20 31.31 95 834 ♦ 1800 575 365T TEFC CALIBRE EPAct P36G4555 6,334 RTT20 33.44 94.1 840 75 1800 575 365T TEFC XE NEMA Prem ♦ P36G3337 8,041 RXE20 33.44 95.4 840 1200 575 405T TEFC CALIBRE EPAct ♦ P40G4655 8,533 RTT20 38.31 93.6 1160 1200 575 405T TEFC XE NEMA Prem ♦ P40G489 9,922 RXE20 38.31 95 1160 3600 575 405TS TEFC CALIBRE EPAct ♦ P40G4502 9,258 RTT20 35.31 93.6 1160 3600 575 405TS TEFC XE NEMA Prem ♦ P40G490 10,765 RXE20 35.31 95 1120 1800 575 405T TEFC CALIBRE EPAct ♦ P40G4552 8,433 RTT20 38.31 94.5 1160 100 1800 575 405T TEFC XE NEMA Prem ♦ P40G491 9,864 RXE20 38.31 95.4 1160 1200 575 444T TEFC CALIBRE EPAct ♦ P44G4654 11,374 RTT20 44.62 94.1 1540 1200 575 444T TEFC XE NEMA Prem ♦ P44G746 15,782 RXE20 44.62 95 1540 3600 575 444TS TEFC CALIBRE EPAct ♦ P44G4504 11,947 RTT20 40.88 94.5 1524 3600 575 444TS TEFC XE NEMA Prem ♦ P44G750 13,890 RXE20 40.88 95.4 1540 1800 575 444T TEFC CALIBRE EPAct ♦ P44G4554 11,020 RTT20 44.62 94.5 1540 125 1800 575 444T TEFC XE NEMA Prem ♦ P44G748 12,814 RXE20 44.62 95.8 1540 1200 575 445T TEFC CALIBRE EPAct ♦ P44G4655 13,928 RTT20 44.62 94.1 1730 1200 575 445T TEFC XE NEMA Prem ♦ P44G747 16,195 RXE20 44.62 95.4 1800 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers without suffixes CC019A – model numbers with suffix For pricing information or to place orders, go to www.PTplace.com M-100 IEC 575 Volt Brake Motor Single Phase Washdown Duty Explosion Proof Explosion Proof Washdown Duty Single Phase Brake Motor 575 Volt IEC 575 Volt Motors 575V Standard Motors - Sabre / Calibre / XE Totally Enclosed - IP44 Foot Mounted 1/3 - 350 HP con’t Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim. Full Load Wt. (lb) 3600 575 445TS TEFC CALIBRE EPAct ♦ P44G4505 $14,587 RTT20 40.88 94.5 1714 3600 575 445TS TEFC XE NEMA Prem ♦ P44G751 16,962 RXE20 40.88 96.2 1730 1800 575 445T TEFC CALIBRE EPAct ♦ P44G4555 13,001 RTT20 44.62 95 1730 150 1800 575 445T TEFC XE NEMA Prem ♦ P44G749 15,117 RXE20 44.62 96.2 1730 1200 575 445T TEFC CALIBRE EPAct ♦ P44G6410 15,919 RTT20 44.63 95 5 1730 1200 575 445T TEFC XE NEMA Prem ♦ P44G5661 18,513 RXE20 44.63 95.8 1800 3600 575 445TS TEFC CALIBRE EPAct ♦ P44G6408 18,761 RTT20 40.87 95 1714 3600 575 445TS TEFC XE NEMA Prem ♦ P44G5662 21,814 RXE20 40.87 96.2 1800 1800 575 445T TEFC CALIBRE EPAct ♦ P44G6409 15,401 RTT20 44.63 95 5 2070 200 1800 575 447T TEFC XE NEMA Prem ♦ P44G5237 17,906 RXE20 48.13 96.2 5 2070 1200 575 447T TEFC CALIBRE EPAct ♦ P44G6510 18,081 RTT20 48.13 95 5 2030 1200 575 449T TEFC XE NEMA Prem ♦ P44G5241 21,024 RXE20 53.13 96.2 2030 3600 575 447TS TEFC CALIBRE EPAct ♦ P44G6508 23,300 RTT20 44.37 95 2030 3600 575 447TS TEFC XE NEMA Prem ♦ P44G5234 27,092 RXE20 44.37 96.2 2030 1800 575 447T TEFC CALIBRE EPAct ♦ P44G6509 18,395 RTT20 48.4 95.4 5 2030 250 1800 575 449T TEFC XE NEMA Prem ♦ P44G5238 21,389 RXE20 53.4 96.2 5 2410 1200 575 449T TEFC CALIBRE EPAct ♦ P44G6606 24,013 RTT20 53.13 95.4 5 2410 ♦ 1200 575 449T TEFC XE NEMA Prem P44G5242 27,921 RXE20 53.13 96.2 5 2410 3600 575 449TS TEFC XE NEMA Prem ♦ P44G5235 34,233 RXE20 49.37 95.8 2410 300 1800 575 449TS TEFC CALIBRE EPAct ♦ P44G6605 21,931 RTT20 49.37 95.4 2410 1800 575 449T TEFC XE NEMA Prem ♦ P44G5239 25,500 RXE20 53.13 96.5 5 2410 3600 575 449TS TEFC XE NEMA Prem ♦ P44G5236 38,944 RXE20 49.37 96.2 2410 350 1800 575 449T TEFC XE NEMA Prem ♦ P44G5240 30,105 RXE20 53.13 96.2 5 2410 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers without suffixes CC019A – model numbers with suffix For additional product information, go to www.reliance.com M-101 575 Volt Motors 575V Standard Motors - Sabre / Calibre / XE Totally Enclosed - IP44 C-Face Foot Mounted 2 - 20 HP Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim Full Load Wt. 2 1800 575 56C TEFC Std. P56H1632 $458 REM20 13.54 82 42 3 1800 575 182TC TEFC CALIBRE EPAct ♦ P18G3846 635 RTT20 16.38 88 110 5 1800 575 184TC TEFC CALIBRE EPAct ♦ P18G3847 748 RTT20 16.38 88 120 7.5 1800 575 213TC TEFC CALIBRE EPAct ♦ P21G3846 964 RTT20 20 90 170 10 1800 575 215TC TEFC CALIBRE EPAct ♦ P21G3847 1,085 RTT20 20 90 185 15 1800 575 254TC TEFC CALIBRE EPAct ♦ P25G1122 1,488 RTT20 25.06 91 280 20 1800 575 256TC TEFC CALIBRE EPAct ♦ P25G1123 1,798 RTT20 25.06 91 315 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers C-Face Footless 1/2 - 10 HP Synch Efficiency Model List Price “C” Eff. @ Approx. HP Voltage Frame Enclosure Product Notes RPM Standard Number Price Symbol Dim Full Load Wt. 1/2 1800 575 56C TEFC Std. P56H1638 $288 REM20 11.48 69 23 3/4 1800 575 56C TEFC Std. P56H1637 337 REM20 11.48 75.2 26 3600 575 56C TEFC Std. P56H1641 332 REM20 11.48 69 24 1 1800 575 56C TEFC Std. P56H1741 358 REM20 11.48 73.7 27 1.5 1800 575 56C TEFC Std. P56H1740 378 REM20 12.48 78.5 31 2 1800 575 145TC TEFC Std. P14H1750 415 REM20 13.6 81.8 39 3 1800 575 182TC TEFC CALIBRE EPAct ♦ P18G3884 657 RTT20 17.12 87.5 110 5 1800 575 184TC TEFC CALIBRE EPAct ♦ P18G3885 770 RTT20 17.12 87.5 120 7.5 1800 575 213TC TEFC CALIBRE EPAct ♦ P21G3884 986 RTT20 20.12 89.5 170 10 1800 575 215TC TEFC CALIBRE EPAct ♦ P21G3885 1,107 RTT20 20.12 89.5 185 ♦ - Inverter Duty. See page M-273 Cast Iron Frame CC049A – “EPAct” and “NEMA Prem” model numbers For pricing information or to place orders, go to www.PTplace.com M-102 IEC 575 Volt Brake Motor Single Phase Washdown Duty Explosion Proof
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the P14H1750?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods