RADISYS SH845GV
Specifications
Form Factor
ATX
System Chipset
Intel ICH4
ADD
AGP Digital Display card support with dual,DVO channels for TMDS (PanelLink), LVDS
AGP
AGP cards not supported
Audio
AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset
Battery
Lithium coin cell (5 years operating life typical)
BIOS Type
Based on Phoenix ServerBIOS 3.0
Capacity Maximum
2GB
Chipset
Intel 845GV with ICH4 (long life, embedded chipset)
Compact Flash
Compact Flash socket on secondary IDE as Master or Slave (jumper selectable)
Dimensions
12" x 9.6", 4-layer PCB, ATX compliant
Drive Types
Supports ATAPI, LS120 and ZIP drives
ECC / Parity
Not supported
Expansion Slots
PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots
Floppy Types
Supports standard 3.5" and 3-mode floppy drives
Front Panel Connectors
for power control and status, Reset, LAN LEDs, IDE activity LED
GPIO
13 GPIO lines via header (also supports an LCD character display)
I/O VGA
Via 15-way D-type
IDE Devices
Two Ultra ATA/100 interfaces via 40-way boxed header
Keyboard & Mouse
Swappable PS/2 connectors, on-board header connectors
Memory Sockets
Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100)
Network Controllers
Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible
On-board Connectors
CD In, AUX In, Line Out ATAPI connectors onboard
On-board header to connect to external LEDs
Parallel Port
25-pin D-type supporting bi-directional, EPP and ECP modes
Power Consumption
91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software
Power Management
PCI PME, ACPI 1.0b
Power Supply Type
Support for hard- and soft- switched power supplies
Processor
Socket 478-pin µPGA ZIF socket for Pentium 4 and Celeron processors,FSB 400MHz and 533MHz
Rear Connector
RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed
Rear Connectors
Mic, Line Out and Line In jacks on rear panel
Remote / Wake-up
Not supported
Resolution
1600 x 1200 pixels with 32-bit color support
Serial Ports
COM1 on 9-pin D-type, COM2, via 10-way header
System Management
Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security
USB
4 rear panel USB 2.0 ports (also supports 1.1),2 USB 2.0 ports on internal headers
VGA
Integrated Intel Extreme graphics
Watchdog
Watchdog timer
Datasheet
Extracted Text
[Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners. [Print This Datasheet] Endura SH845GV Endura 845GV ATX Pentium 4 Motherboard Advanced Performance The Endura SH845GV ATX is a long life embedded platform based on the Intel® 845GV chipset. This core technology, which is selected from the Intel® Embedded Division's long life roadmap, ensures that the SH845GV will be available for at least five years from Intel's launch of this chipset. Although market factors will determine the actual product lifetime, the expected production life for the SH845GV will be at FEATURE SUMMARY least to the end of 2007. Cost effective, Pentium 4 solution The SH845GV is a scalable platform delivering both high performance with Intel® Pentium® 4 with six PCI slots processors through to an entry-level, cost-effective solution based on the Intel® Celeron® processor. RadiSys has selected the 2GHz Celeron and the 2.4GHz Pentium 4 processors from Intel's embedded roadmap as pre-configured processors to be supplied with the SH845GV. This ensures continued availability of the processor even when it is long gone from commercial distribution channels. RadiSys Value-Add The SH845GV provides six PCI slots, typically required in applications such as video surveillance, medical imaging and gaming where a large number of peripheral cards are used. In addition, the on- board Compact Flash socket provides the option for on-board storage important for ruggedized applications that cannot use hard drives or where there is a need to load an embedded operating system from solid state memory. The 845GV chipset provides integrated Intel Extreme Graphics, thus ensuring a long life video solution. The AGP Digital Display (ADD) slot provides a means to drive either DVI-I monitors, LVDS displays or TV-out via third party ADD cards. The integrated watchdog timer, system monitoring, automatic fanspeed control and 13-bit GPIO port are all value-add features provided by RadiSys specifically for use in advanced embedded applications. Exceptional Support RadiSys is able to provide exceptional support to customers through the concept of a "virtual division" relationship. In practice this means strong engineering backup with problem resolution, sustaining services, product life cycle management, change control and development of system level solutions. Endura SH845GV Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA ZIF socket for Pentium® 4 and Celeron® processors FSB 400MHz and 533MHz Chipset - Intel 845GV with ICH4 (long life, embedded chipset) Memory Sockets Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100) Capacity Maximum 2GB ECC / Parity Not supported Video VGA Integrated Intel® Extreme graphics Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces AGP AGP cards not supported Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset Rear Connectors Mic, Line Out and Line In jacks on rear panel On-board Connectors CD In, AUX In, Line Out ATAPI connectors on- board Network Controllers Intel 82551ER controller for 10/100 Ethernet IEEE 802.3 10Base-T, 100Base-TX compatible Rear Connector RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed On-board Connectors On-board header to connect to external LEDs Remote / Wake-up Not supported IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Compact Flash Compact Flash socket on secondary IDE as Master or Slave (jumper selectable) Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 12" x 9.6", 4-layer PCB, ATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, LAN LEDs, IDE activity LED GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots System Management Monitoring Voltage, temperature and fans Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer - SMBus connector Power Management - PCI PME, ACPI 1.0b Power Supply Type Support for hard- and soft- switched power supplies Power Consumption 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS™ 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, others by request Safety Compliance - Evaluated in accordance with UL60950, EN60950 and IEC60950 EMC Compliance - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp. 0°C to 55°C Storage Temp. -40°C to 85°C Relative Humidity 5% to 95% non-condensing Ordering Information Call for pricing and availability. Refer to the order codes below. Description: The following base configurations are available: SH845GV ATX, RoHS PRODUCT CODE: SHGV1L03-0-0 I/O shield for SH845GV ATX, RoHS PRODUCT CODE: ATX-L BG IOSHLD © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Endura SH845GV DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners.
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the SH845GV?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods