RADISYS SCFPL03-0-0

ENDURA SC815E MicroATX/FlexATX Intel® 815E PCI Motherboard Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management, Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued FEATURE SUMMARY support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications. Intel 815E chipset The SC815E is a small form factor, MicroATX motherboard that is well suited to embedded applications. The Integrated VGA FC-PGA Celeron processor in dimensions of the board are small enough such that the SC815E can also be used in a FlexATX chassis. It is flip-chip pin grid array therefore a very versatile motherboard suitable for a wide variety of applications. It is available with either (FC-PGA) package Celeron TM or Pentium® III processors in FC-PGA package providing scalable performance and the option to FC-PGA Pentium III choose the appropriate price/performance point to suit the application. The high degree of integration and rich processor in FC-PGA feature set provides a platform that is ideal for low cost system design. The SC815E is designed for use in package applications with a need for high performance graphics, which can be supported either with the integrated 815E Up to 512MB SDRAM video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build System management configurations, the SC815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) Intel 10/100 Ethernet and industrial automation applications. PanelLinkTM flat panel interface DFP and DVI monitor support AC97 audio Fan control Eight GPIO lines Three PCI slots 4X AGP slot One parallel port Two serial ports Four USB ports Phoenix BIOSTM Connectors for internal cabling 9" x 7.5" MicroATX and FlexATX compliant ROHS Compliant ENDURA SC815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 1 of 3 Endura SC815E Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package 66MHz, 100MHz, 133MHz operation FSB Chipset Intel 815E chipset with ICH2 Memory Type Two 168-pin DIMM sockets for PC100 and PC133 SDRAM Maximum of 512MB Capacity Not supported ECC/Parity Video Controller 3D graphics controller integrated in 815E chipset Display Cache Optional display cache via GPA module in the AGP slot Stored in main memory (holds 2D and 3D data) Frame Buffer Silicon Image SII164 PanelLink controller Flat Panel Cabled DVI or DFP connector from header DFP/DVI Optional DVI or DFP adapter for rear I/O mounting Audio Controller AC97 v2.1 CODEC using Analog Devices AD1885 (with integrated headphone amplifier) ATAPI connector for CD-ROM (stereo) Connectors ATAPI connector for telephony (mono) 7-pin connector for external AC97 CODEC Stereo line out 3.5mm jack socket (can be used with headphones) Stereo line in 3.5mm jack socket Mono microphone 3.5mm jack socket with phantom power, suitable for electret microphones Network Controller Intel ICH2 integrated MAC with Intel 82562 PHY IEEE 802.3 10Base-T and 100Base-TX compatible Connector RJ45 with LEDs for line activity, link integrity and line speed IDE Devices Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header Supports ATAPI, LS120 and ZIP drives Types Floppy Types Supports standard 2- and 3-mode 3.5" floppy drive Mechanical Dimensions 9" x 7.5" Compliance MicroATX and FlexATX compliant PCB Four layers I/O shield Standard ATX available options for RJ45 Ethernet and DVI/DFP connectors I/O Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes COM1 on 9-pin D-type, COM2 via 10-way header Serial Ports Supported in place of COM2 via front panel connector IrDA Dual stacked USB 1.1 rear connector Motherboard header for single USB port USB USB interface via AGP slot Swappable PS/2 connectors Phoenix keyboard code Keyboard & Mouse Motherboard headers for keyboard and mouse ports Eight GPIO lines for control functions or front panel indicators GPIO Expansion Slots PCI Three dedicated bus master PCI 2.2 slots ISA Connector for PCI/ISA bridge support via PCI slot AGP 4X AGP slot System Management Monitoring of voltage, temperature and fans Anti-tamper security CPU fansink and system fan speed control Power Management PCI PME, ACPI 1.0, APM 1.2 Power Supply Type Support for hard- and soft- switched PSU Typical 35W Battery Lithium coin cell (5 years operating life typical) Optional super-cap for 1 hour backup BIOS Type PhoenixBIOS 4.0 Release 6.0 Special Features Customizable defaults, customer logo, silent boot, automatic configuration Operating Systems Windows® 95, Windows 98, Windows 2000, Windows NT® Qualification of real time and other operating systems subject to demand Safety Compliance Designed for compliance with UL1950, EN60950 and IEC60950 EMC Compliance Designed for compliance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp 0°C to 55°C Storage Temp -40°C to 85°C Relative Humidity 5% to 95% non-condensing ENDURA SC815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 2 of 3 Ordering Information Toll-Free: 800-950-0044 Phone: 503-615-1100 Support: 866-385-6167 Contact Information Call for pricing and availability. Refer to the order codes below. www.radisys.com DESCRIPTION info@radisys.com Channels and other locations SC815E uATX without integrated DVI, RoHS PRODUCT CODE: SCL03-0-0 SC815E ATX with integrated DVI, RoHS PRODUCT CODE: SCFPL03-0-0 Corporate Headquarters I/O shield for SCL03-0-0, RoHS 5445 NE Dawson Creek Dr. PRODUCT CODE: ATX-L 81X IOSHLD Hillsboro, OR 97124 USA Phone: 503-615-1100 I/O shield for SCFPL03-0-0, RoHS Fax: 503-615-1121 PRODUCT CODE: ATX-FPL 81XIOSHLD Toll-Free: 800-950-0044 Support: 866-385-6167 DVI connector / bracket assembly, RoHS EMEA: +49 811 555457-0 PRODUCT CODE: DVI_CABLE-R China: 86.21.50804062 2006 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. ENDURA SC815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 3 of 3