ENDURA GL815E ATX Intel® 815E Chipset-Based PCI/ISA Motherboard Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management,Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain FEATURE SUMMARY important for embedded applications. Intel 815E chipset The GL815E is a standard form factor, ATX motherboard that is well suited to embedded applications. It is Integrated VGA available with either Intel Celeron TM or Pentium® III processor in FC-PGA package providing scalable Celeron processor in flip-chip performance and the option to chose the appropriate price/performance point to suit the application. The high (FC-PGA) package degree of integration and rich feature set provides a platform that is ideal for low cost system design. The GL815E Intel Pentium III processor in is designed for use in applications with a need for high performance graphics, which can be supported either with (FC-PGA) package the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available Up to 512MB SDRAM in different build configurations, the GL815E is used in telecom, datacom, medical, transaction terminals (such as System Management Intel 10/100 Ethernet coin-op gaming) and industrial automation applications. PanelLinkTM flat panel interface DFP and DVI monitor support AC97 audio Fan control Eight GPIO lines Four PCI slots One ISA slot One shared PCI/ISA slot 4X AGP slot One parallel port Two serial ports Four USB ports PhoenixBIOSTM Connectors for internal cabling 12" x 7.5" ATX 2.03 compliant ROHS Compliant ENDURA GL815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 4 | Page 1 of 3 Endura GL815E Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package 66MHz, 100MHz, 133MHz operation FSB Chipset Intel 815E chipset with ICH2 Memory Type Two 168-pin DIMM sockets for PC100 and PC133 SDRAM Maximum of 512MB Capacity Not supported ECC/Parity Video Controller 3D graphics controller integrated in 815E chipset Display Cache Optional display cache via GPA module in the slot Frame Buffer Stored in main memory (holds 2D and 3D data) Flat Panel Silicon Image SII164 PanelLink controller DFP/DVI Cabled DVI or DFP connector from header Optional DVI or DFP adapter for rear I/O mounting Audio Controller AC97 v2.1 CODEC using Analog Devices AD1885 (with integrated headphone amplifier) ATAPI connector for CD-ROM (stereo) Connectors ATAPI connector for telephony (mono) 7-pin connector for external AC97 CODEC Stereo line out 3.5mm jack socket (can be used with headphones) Stereo line in 3.5mm jack socket Mono microphone 3.5mm jack socket with phantom power, suitable for electret microphones Network Controller Intel ICH2 integrated MAC with Intel 82562 PHY IEEE 802.3 10Base-T and 100Base-TX compatible Connector RJ45 with LEDs for line activity, link integrity and line speed IDE Devices Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header Supports ATAPI, LS120 and ZIP drives Types Floppy Types Supports standard 2- and 3-mode 3.5" floppy drive Mechanical Dimensions 12" x 7.5" Compliance ATX 2.03 compliant PCB Four layers I/O shield Standard ATX available options for RJ45 Ethernet and DVI/DFP connectors I/O Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes COM1 on 9-pin D-type, COM2 via 10-way header Serial Ports Supported in place of COM2 via front panel connector IrDA Dual stacked USB 1.1 rear connector Motherboard header for single USB port USB USB interface via AGP slot Swappable PS/2 connectors Phoenix keyboard code Keyboard & Mouse Motherboard headers for keyboard and mouse ports Eight GPIO lines for control functions or front panel indicators GPIO Expansion Slots PCI/ISA Four dedicated bus master PCI 2.2 slots One ISA slot One shared PCI/ISA slot AGP 4X AGP slot System Management Monitoring of voltage, temperature and fans Anti-tamper security CPU fansink and system fan speed control Power Management PCI PME, ACPI 1.0, APM 1.2 Power Supply Type Support for hard- and soft-switched PSU Typical 35W Battery Lithium coin cell (5 years operating life typical) Optional super-cap for 1 hour backup BIOS Type PhoenixBIOS 4.0 Release 6.1 Special Features Customizable defaults, customer logo, silent boot, automatic configuration Operating Systems Windows 95, Windows 98, Windows 2000, Windows NT ® ® Qualification of real time and other operating systems subject to demand Safety Compliance Designed for compliance with UL1950, EN60950 and IEC60950 EMC Compliance Designed for compliance with EN55022, EN55024 and FCC Part 15 Class B Environment Operating Temp 0°C to 55°C Storage Temp -40°C to 85°C Relative Humidity 5% to 95% non-condensing ENDURA GL815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 4 | Page 2 of 3 Ordering Information Toll-Free: 800-950-0044 Phone: 503-615-1100 Contact Information Support: 866-385-6167 Call for pricing and availability. www.radisys.com Refer to the order codes below. info@radisys.com Channels and other locations DESCRIPTION GL815E ATX with integrated DVI, RoHS PRODUCT CODE: GLFPL03-0-0 Corporate Headquarters I/O shield for GLFPL03-0-0, RoHS PRODUCT CODE: ATX-FPL 81XIOSHLD 5445 NE Dawson Creek Dr. I/O shield for GLFPL03-0-0 (no DVI port), RoHS Hillsboro, OR 97124 USA Phone: 503-615-1100 PRODUCT CODE: ATX-L 81X IOSHLD Fax: 503-615-1121 DVI connector / bracket assembly, RoHS Toll-Free: 800-950-0044 PRODUCT CODE: DVI_CABLE-R Support: 866-385-6167 EMEA: +49 811 555457-0 China: 86.21.50804062 2006 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. ENDURA GL815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 4 | Page 3 of 3