RADISYS EPC2325R
Specifications
Form Factor
PICMG
Ethernet Chipset
Intel 82562
System Chipset
Intel ICH
Audio
On-board mini-speaker for status and diagnostic beep codes
BIOS
PhoenixBIOS 4.0 Release 6.0
Cache
Integrated with the CPU
Capacity
Max 512MB
Chipset
Intel 815 GMCH with C-ICH
Controller
3D integrated into 815 chipset
Adaptec 7892X
Dual Intel C-ICH MACs with Intel 82562ET PHYs
Intel C-ICH
CPU
370-pin PGA socket for Intel Celeron and Pentium III processors in FC-PGA and FC-PGA2 packages
CRT
One 15-pin VGA D-sub connector
Dimensions
13.33" x 4.80," 339 mm x 122 mm
Ethernet
Two RJ-45 connectors with activity LED's
Fan Control
Control up to three fans (1 CPU and 2 system fans)
Floppy
One 34-pin header
Floppy Interface
Standard floppy
FSB
66MHz-133MHz (processor dependent)
GPIO
12 lines via 20-pin header (supports a character-based LCD panel)
IDE
Two 40-pin headers
Intel C-ICH
Windows NT 4.0, Windows NT Embedded, Windows XP, Windows XP Embedded, Windows 2000, Linux
Interface
10/100Base-T and 100Base-TX
Single channel Ultra160 LVD SCSI
Two Ultra ATA/100 channels
IrDA
Via front panel connector (shared with COM2)
ISA
16-bit 8.33MHz, fully buffered, 64mA drive capability Supports four 32-bit, 33MHz, PCI devices
Keyboard or Mouse
7-pin header
LAN
Leds One 11-pin header for external LEDs
Monitor
Support Analog VGA
Mouse/Keyboard
One 6-pin PS/2 mini DIN connector (shared)
Parallel Port
One 26-pin header
PCI
Expansion slot for SCSI module
Port80
One 30-pin diagnostic header
Power Management
ACPI 1.0b, APM 1.2
Processor
Intel Pentium III
PSU
Soft- and hard- switched PSU support
Real Time Clock
Compatible with MC146818B
SCSI
MS-DOS, Windows NT 4.0, Windows 2000, Windows XP, Linux
SCSI (optional)
One 68-pin high density connector
Serial Port
Two 10-pin headers
SMbus
4-pin header
Sockets
Two 168-pin vertical DIMM
System Monitoring
Supply voltage, battery voltage, temperature, fan speed
Technology
3.3 V unbuffered, PC133 SDRAM, non-ECC/Parity
USB
Two 5-pin friction lock headers
Watchdog Timer
Two programmable independent timers (250ms-180 minutes)
Features
- 12 GPIOs/LCD character display interface
- 370-pin PGA socket for Intel Celeron and Pentium III processors in FC-PGA and FC-PGA2 packages
- Dual 10/100 Ethernet ports
- Dual watchdog timers
- Expansion slot for SCSI module
- Fan control
- Intel 815 GMCH and C-ICH chipset
- On-board PC speaker
- PCI/ISA PICMG 1.0 R2.0 compliant
- PhoenixBIOS
- Power management
- System management
- Up to 512MB SDRAM Integrated VGA controller
Datasheet
Extracted Text
EPC-2325 PCI/ISA Single Board Computer FEATURE SUMMARY The RadiSys EPC®-2325/EPC®-2225 is a highly integrated SBC designed to meet a cost target which breaks the traditional pricing model of single board computers. Based on modular designs from proven technologies, it is also 370-pin PGA socket for Intel® designed specifically to meet the demands of the OEM embedded market place where a low cost of ownership is Celeron and Pentium III paramount. This is achieved through long lifetime, change management, engineering support and reliability of processors in FC-PGA and design and manufacture. FC-PGA2 packages Intel® 815 GMCH and C-ICH The EPC-2325/EPC-2225 is a fully featured SBC with a wide variety of on-board peripherals. This eliminates the chipset need for additional standard I/O peripheral cards thus enabling the user to maximize the availability of backplane Up to 512MB SDRAM slots. Integrated VGA controller It offers a scalable platform with a choice of processors ranging from an 850MHz Celeron* up to a 1.26GHz Dual 10/100 Ethernet ports Pentium* III and beyond. This allows users to choose the right price/performance point to suit their application. On-board PC speaker 12 GPIOs/LCD character An expansion slot provides an interface for an optional LVD SCSI add-on daughter card. This can be used, for display interface example, as an interface for DAT storage devices as well as other SCSI peripherals. System management The EPC-2325/EPC-2225 is an ideal, high performance platform for computer telephony, telecommunication and Fan control Enterprise applications such as Unified Messaging, Automatic Call Distributor, Interactive Voice Response, Dual watchdog timers Power management Integrated Access Devices, Network Aggregators and IP-based PBX systems. PhoenixBIOS* Expansion slot for SCSI module PCI/ISA PICMG 1.0 R2.0 compliant Peripheral connectivity Video Dual 10/100 Ethernet Dual IDE SCSI (optional) Dual USB Floppy Mouse Keyboard Dual serial Parallel EPC-2325 DATA SHEET | © 2006 RadiSys Corporation | ID: 09-14-2006 2 | Page 1 of 4 EPC-2325 Specifications FEATURE FUNCTION DESCRIPTION Physical Dimensions 13.33" x 4.80," 339 mm x 122 mm Compliance PCI/ISA PICMG 1.0 R2.0 compliant Bus Interface ISA 16-bit 8.33MHz, fully buffered, 64mA drive capability Supports four 32-bit, 33MHz, PCI devices PCI Expansion slot for SCSI module Processor System CPU 370-pin PGA socket for Intel® Celeron and Pentium III processors in FC-PGA and FC-PGA2 packages Cache Integrated with the CPU Chipset Intel® 815 GMCH with C-ICH FSB 66MHz-133MHz (processor dependent) Memory Technology 3.3 V unbuffered, PC133 SDRAM, non-ECC/Parity Capacity Max 512MB Sockets Two 168-pin vertical DIMM Video Controller 3D integrated into 815 chipset Monitor Support Analog VGA Ethernet Interface 10/100Base-T and 100Base-TX Controller Dual Intel® C-ICH MACs with Intel® 82562ET PHYs Hard Drive Interface Interface Two Ultra ATA/100 channels Controller Intel® C-ICH SCSI Interface (Optional) Interface Single channel Ultra160 LVD SCSI Controller Adaptec 7892X Floppy Interface Standard floppy I/O Bracket CRT One 15-pin VGA D-sub connector Ethernet Two RJ-45 connectors with activity LED's Mouse/Keyboard One 6-pin PS/2 mini DIN connector (shared) Additional I/O Floppy One 34-pin header IDE Two 40-pin headers Keyboard or Mouse 7-pin header SCSI (optional) One 68-pin high density connector USB Two 5-pin friction lock headers Serial Port Two 10-pin headers Parallel Port One 26-pin header IrDA Via front panel connector (shared with COM2) GPIO 12 lines via 20-pin header (supports a character-based LCD panel) SMbus 4-pin header LAN Leds One 11-pin header for external LEDs Port80 One 30-pin diagnostic header Drivers Intel® C-ICH Windows NT* 4.0, Windows NT Embedded, Windows* XP, Windows XP Embedded, Windows* 2000, Linux* SCSI MS-DOS, Windows NT 4.0, Windows 2000, Windows XP, Linux Miscellaneous System Monitoring Supply voltage, battery voltage, temperature, fan speed Fan Control Control up to three fans (1 CPU and 2 system fans) Real Time Clock Compatible with MC146818B Watchdog Timer Two programmable independent timers (250ms-180 minutes) BIOS PhoenixBIOS 4.0 Release 6.0 Audio On-board mini-speaker for status and diagnostic beep codes PSU Soft- and hard- switched PSU support Power Management ACPI 1.0b, APM 1.2 EPC-2325 DATA SHEET | © 2006 RadiSys Corporation | ID: 09-14-2006 2 | Page 2 of 4 Environment Operating Non-Operating Temperature 0°C to 55°C -40°C to 85°C Humidity 5% to 95% @ 40°C non-condensing 5% to 95% @ 40°C non-condensing Shock 1g for 10ms 30g for 10ms Vibration 0.25g @ 5-150Hz 5g @ 5-150 Hz Altitude 15,000 ft (4,572 m) 50,000 ft (15,240 m) Regulatory Safety Designed for compliance with UL60950 and IEC60950 EMC Designed for compliance with EN55022, EN55024 and FCC Part 15 Class B Warranty - Two year, parts only EPC-2325 DATA SHEET | © 2006 RadiSys Corporation | ID: 09-14-2006 2 | Page 3 of 4 Ordering Information Toll-Free: 800-950-0044 Phone: 503-615-1100 Support: 866-385-6167 Call for pricing and availability. Refer to the order codes below. Contact Information DESCRIPTION: www.radisys.com With 850MHz Celeron, 0MB SDRAM and fansink info@radisys.com ORDER CODE: EPC2225-850-0 Channels and other locations With 866MHz Pentium III, 0MB SDRAM ORDER CODE: EPC2325-866-0 With 866MHz Pentium III, 0MB SDRAM and SCSI module World Headquarters ORDER CODE: EPC2325S-866-0 5445 NE Dawson Creek Dr. With 1.26GHz Pentium III, 0MB SDRAM and SCSI module Hillsboro, OR 97124 USA ORDER CODE: EPC2325S-126-0 Phone: 503-615-1100 Fax: 503-615-1121 With 866MHz Pentium III, 0MB SDRAM, no SCSI Toll-Free: 800-950-0044 ORDER CODE: EPC2325-866-0 Support: 866-385-6167 2006 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. EPC-2325 DATA SHEET | © 2006 RadiSys Corporation | ID: 09-14-2006 2 | Page 4 of 4
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the EPC2325R?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods