RADISYS EPC-6321
Specifications
Form Factor
PICMG
Ethernet Chipset
Intel 82546EB
Board Style
PrPMC Form Factor 74mm(W) x 149mm(L) x 6.5mm (H)
Cache
L2 Cache 512KB
Connectors
EPC-6321 Port 1 and Port 2 activity LEDs
CPU
Processor 933MHz Pentium III processor
Front Panel
EPC-6321 RJ45 connector for Port 1, Port 2 activity LED
Integrated PCI IDE
Modes Ultra DMA 66 capable
Number of Devices One channel, Two IDE devices
Integrated Super I/O
Controller RadiSys 82600 chipset
Jn1 and Jn2
PrPMC Standard 32-bit, 66MHz capable PCI Interface, complies with VITA32-199x Draft 0.41
Jn3 and Jn4
EPC-6320 EIDE, COM, Keyboard
EPC-6321 Dual Gigabit Ethernet, EIDE, COM, Keyboard
Operating temperature
0°C to 50°C with 200LFM airflow
PCI Chipset
RadiSys 82600 chipset
Relative Humidity
5% to 95% non-condensing
System BIOS
BIOS Type PhoenixBIOS 4.0, Release 6.0 with 4MB of Flash
Special Features PCI 2.1 compliant, IDE drive autoconfigure
System Memory
Capacity 512MB or 1GB of PC-133 SDRAM with ECC
Watchdog Timer
A retriggerable one-shot WDT with a programmable reset interval ranging from 1ms to 2048s (~34.13 minutes)
Features
- 1GB and 512MB Memory Options
- 74mm x 149mm streamlined PrPMC form factor
- 933MHz Intel® Pentium® III based PrPMC
- COM, Keyboard
- Dual Gigabit Ethernet
- One Channel IDE
- PICMG 2.15 Compatibility on EPC6321
- Safety and EMC Compliance
- System Monitoring, Watchdog Timer
- VxWorks support
Datasheet
Extracted Text
EPC-6320/EPC-6321 DATA SHEET P R O C E S S O R P M C F A M I L Y ® ® The EPC -6320 and EPC -6321 are the The EPC-6321 provides PICMG 2.15 newest additions to the RadiSys Processor compatibility with Dual Gigabit Ethernet PMC (PrPMC) family, a family of powerful through the Jn4 connector. The PICMG 2.15 building blocks that enable OEMs to easily standard enables interoperability with cPCI upgrade and customize their designs. These 2.16 and ATCA carrier boards to standardize a boards are ideal for processor offload switch-fabric architecture within a and control processor applications in the modular system. Enterprise and Service Provider markets. The 6320 differs from the EPC-6321 by FEATURE SUMMARY The EPC-6320 and EPC-6321 feature providing a legacy Jn4 pin-out to the EPC- ® ® ® ® 933MHz Intel Pentium III processor 6315 for legacy EPC-6315 users. • 933MHz Intel Pentium III based PrPMC • 1GB and 512MB Memory Options performance, 512MB or 1GB Memory with • Dual Gigabit Ethernet ECC protection, and dual Gigabit Ethernet. The EPC-6320 and EPC-6321 provide a • PICMG 2.15 Compatibility on EPC6321 In addition, the RadiSys 82600 integrated complete CPU and memory subsystem in a • 74mm x 149mm streamlined PrPMC chipset allows the EPC-6320/21 to become compact rugged, industry-standard form factor form factor a Monarch or Non-monarch PrPMC by - enabling OEMs to focus on their application. • One Channel IDE automatic configuration based on the • COM, Keyboard • System Monitoring, Watchdog Timer strapping of the slot on the baseboard. • Safety and EMC Compliance • VxWorks support 1 SPECIFICATIONS FEATURE FUNCTION DESCRIPTION PrPMC Form Factor 74mm(W) x 149mm(L) x 6.5mm (H) Board Style CPU Processor 933MHz Pentium III processor Cache L2 Cache 512KB - RadiSys 82600 chipset PCI Chipset Capacity 512MB or 1GB of PC-133 SDRAM with ECC System Memory System BIOS BIOS Type PhoenixBIOS 4.0, Release 6.0 with 4MB of Flash Special Features PCI 2.1 compliant, IDE drive autoconfigure Integrated PCI IDE Number of Devices One channel, Two IDE devices ORDERING INFORMATION Modes Ultra DMA 66 capable Integrated Super I/O Controller RadiSys 82600 chipset Call for pricing and availability. 10/100/1000BaseT Intel® 82546 Dual Gigabit Ethernet Controller Ethernet Refer to the order codes below. EPC-6321 RJ45 connector for Port 1, Port 2 activity LED Front Panel DESCRIPTION: Connectors EPC-6321 Port 1 and Port 2 activity LEDs 933MHz Pentium III Processor and 512MB Jn1 and Jn2 PrPMC Standard 32-bit, 66MHz capable PCI Interface, complies with VITA32-199x Draft 0.41 Memory, PICMG 2.15 compatible EPC-6321 Dual Gigabit Ethernet, EIDE, COM, Keyboard Jn3 and Jn4 ORDER CODE: EPC6321-933-512 EPC-6320 EIDE, COM, Keyboard 933MHz Pentium III Processor and 1GB - A retriggerable one-shot WDT with a programmable reset interval ranging from Watchdog Timer Memory, PICMG 2.15 compatible 1ms to 2048s (~34.13 minutes) ORDER CODE: EPC6321-933-1G Environment Operating Temperature Operating temperature 0°C to 50°C with 200LFM airflow Relative Humidity 5% to 95% non-condensing 933MHz Pentium III Processor and 512MB Power Requirement - Typical Maximum Memory, legacy EPC6315 Jn4 ORDER CODE: EPC6320-933-512 EPC6320-933-512 19W 23W EPC6321-933-512 19W 23W 933MHz Pentium III Processor and 512MB EPC6320-933-1GB 21W 26W Memory, legacy EPC6315 Jn4 EPC6321-933-1GB 21W 26W ORDER CODE: EPC6320-933-1G EPC-6320/EPC-6321 BLOCK DIAGRAM ACT LED Front Panel RJ-45 RJ-45 CH1 CH2 Switching EPC6320 power Only supplies Intel Tualatin-LV Interface Clock 833MHz 512K L2 voltage CH1 generator regulators Magnetics CH2 Host bus: 133 MHz Intel 82546 Ethernet Host bus interface LPCI Header RadiSys 82600 controller COM Memory module Memory Local PCI interface interface Boot COM Backplane I/O Flash PCI interface interface COM BPCI SMBus KBD IDE EPC6321 ©2004 RadiSys Corporation. RadiSys and EPC are Only Jn1 Jn4 registered trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective Jn2 owners. All specifications within this document are subject to change without notice. 07-1252-03 1104 World Headquarters 5445 NE Dawson Creek Drive Hillsboro, OR 97124 USA Phone: 503-615-1100 Fax: 503-615-1121 Toll-Free: 800-950-0044 www.radisys.com info@radisys.com 2
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the EPC-6321?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods