DATA SHEET ® EPC -1316 VMEBUS EMBEDDED COMPUTER WITH ® MOBILE PENTIUM III 400MHZ PROCESSOR ® The RadiSys EPC -1316 is a highly The EPC-1316 can be fitted with an integrated, single slot VME computer optional second slot Feature Board.This powered by Intel’s Mobile 400MHz Feature Board (MSF) is configured for ® Pentium III. Designed for high further Mass storage and I/O Expansion. performance and high reliability, the This configuration provides an on-board EPC-1316 offers a full complement of 2.5” EIDE hard disk, 5 additional Serial PC features in a rugged 6U VME ports, support for compact flash and form factor. 10/100 Ethernet via RJ45. For applications requiring mass storage FEATURE SUMMAR Y At the heart of the EPC-1316 is Intel’s without using a second slot, a most advanced Mobile Pentium III low-profile, solid state (ATA Compliant) ® ®  Intel Pentium Mobile III 400 MHz Pentium III with 440BX chipset processor to date. The EPC-1316's flash disk module is available for the  256KB on-dye L2 cache using synchronous Pentium III processor offers 400MHz EPC-1316. Because of the optional pipeline burst SRAM performance while dissipating less than Feature Board the EPC-1316 can be  Support of 512 EDO DRAM via two 144-pin SODIMM modules half the power of a standard Pentium III feature enriched very easily and at a  VGA/SVGA/XGA graphics controller with processor. This allows the EPC-1316 to much lower cost than almost all other integrated two MB video memory via front panel operate with a passively cooled processor boards in the market place. 15 pin standard connector  Ethernet 10/100BaseT via front panel heatsink, which further enhances the RJ-45 connector system reliability. The product can also  Front panel connectors for PS/2 keyboard, PS/2 be upgraded to operate with a 700MHz mouse, USB, serial (COM1)  Operates as VMEbus master or slave processor. The EPC-1316 supports both  A16/A24/A32 addressing with D08/D16/D32 Master and Slave and 8, 16 and 32 bit data accesses address and data.  Secondary EIDE channel, floppy and parallel port via VME P2 connector  PCI Mezzanine Card (PMC) expansion site  Primary EIDE channel, floppy, parallel and second serial port (COM2) accessible via high density on-board connectors  Optional expansion board with 2.5” EIDE disk drive and either 5 additional serial ports, 10/100 ethernet, and compact flash support.  Optional module supports Compact Flash solid state disk operating as a true IDE drive (no special BIOS extensions or flash file system drivers required). Available only for applications not using the PMC expansion site.  Microsoft* DOS, Windows* 95 and Windows NT* 4.0 compatible. Available with RadiSys’ EPConnect® software, providing the developer with an easy to use software interface to the VMEbus and EPC-15 hardware.  VxWorks 5.3 compatible including board support package - BSP  Single slot, 6U form-factor (two slots with optional mass storage and I/O expansion board) SPECIFIC ATIONS FEATURE FUNCTION DESCRIPTION ORDERING INFORMATION Board Style VMEbus 6U Call for pricing and availability. CPU Intel 400MHz Pentium III (Upgradable to 700 MHz) Refer to the order codes below. Cache 256KB on-dye L2 cache using synchronous pipeline burst SRAM PCI Chipset Intel 440BX AGPset: 82443BX System Memory Capacity Up to 256MB EDO DRAM via two 144-pin SODIMM modules DESCRIPTION Specification 60ns, 32/64/128MB, 3.3V SODIMMs EPC1316BASE128 - Base unit with 400MHz System BIOS BIOS Type Phoenix BIOS with 1MB flash and battery backed CMOS RAM processor and 128MB of Memory Special Features APM 1.2; IDE drive auto-configure; multilingual support On-board I/O Integrated PCI EIDE Two independent channels, four IDE devices. Primary channel EPC1316MSF128 - Base unit with MSF board via high density board-board connector, secondary channel via (optional mass storage, ethernet and 5 serial P2 VMEbus connector ports), 400MHz processor and 128MB Universal Serial Bus (USB) Single host USB port of Memory Serial Two serial ports. COMA is RS-232 via front panel DB9 connector, COMB via board-board option connector accessible OPTIONS by MSIO expansion CFSM - optional Compact-Flash socket module Parallel One IEEE-1284-1994 compatible bi-directional parallel port via Compact-Flash card not included P2 connector or board-board optional connector (only one may be used at a time) Floppy controller Standard PC-compatible floppy controller via P2 connector or board-board option connector. Keyboard PS/2 compatible Mouse PS/2 compatible Graphics SVGA/XGA with 4MB video memory supporting resolutions up to 1280x1024 (C&T69030) Fast Ethernet 10/100Mbit via front panel RJ45 connector (Intel 82559-ER) VMEbus interface Universe II PCI-VMEbus bridge Supports master or slave operation in A16/A24/A32 address spaces for D08/D16 and D32 data widths. Generates and responds to all 7 VMEbus interrupts. Other features Real Time Clock Accurate to ±13 minutes/yr., 10 year expected life Battery Field replaceable 3.0V, 200mAH CR2032 (or equivalent) lithium battery Watchdog timer Programmable reset interval ranging from 128 milliseconds to 8.2 seconds Connectors Front panel PS/2 keyboard, PS/2 mouse, DB9 serial, Ethernet 10/100 RJ45, DB15 VGA Rear panel VME P1 96 pin standard VME Rear panel VME P2 96 pin VME with user defined secondary IDE, floppy, parallel port and reset control signal Optional MSf Mass storage and Connects with the host EPC-1316 board via two 80 pin-stacking second slot I/O carrier connectors. Provides 2.5” EIDE disk drive, 5 serial ports, and sec- expansion board 10/100 ethernet port Ethernet 10/100 Ethernet with RJ45 connector Serial COM2 (routed from EPC-1316) jumper selectable RS-232 or RS-485, COM 3-6 provided by on-board UART’s (RS-232). All via front panel DB9 Environment Operating Temp. 0 - 55°C derated 2°C per 1000 ft (300 m) over 6600 ft (2000m) Power Requirement Typical w/ SVGA 11.5W for CPU, 59W total System worst case 64MB memory +5V=10.082 Amps, +12V=.519 Amps, -12V=.519 Amps World Headquarters International Headquarters 5445 NE Dawson Creek Drive 10 Centech Park Hillsboro, OR 97124 USA Fringe Meadow Road, Redditch Phone: 503-615-1100 Worcestershire, B98 9NR Fax: 503-615-1121 United Kingdom ©2003 RadiSys Corporation. RadiSys and EPC are registered Toll-Free: 800-950-0044 Phone: +44 (0) 1527 588800 trademarks of RadiSys Corporation. *All other trademarks are the Customer Service: 800-256-5917 Fax: +44 (0) 1527 588801 properties of their respective owners. All specifications within this document are subject to change without notice. 07-1061-02 0603 Product Support: 800-438-4769 www.radisys.com