RADISYS BG845G

ENDURA BG845G MicroATX Intel® 845GV PCI Embedded Motherboard ADVANCED PERFORMANCE The RadiSys BG845G expands the Endura motherboard family to deliver a high performance embedded platform based on the latest Intel® Pentium* 4 and Celeron* processors. Featuring the Intel 845GV chipset, the BG845G delivers cutting edge technology and versatility to meet the needs of a broad range of embedded applications such as test and measurement, industrial automation, medical, transaction terminals, gaming and Enterprise applications. Platform enhancements feature integrated Intel Extreme Graphics, greater bandwidth for high performance FEATURE SUMMARY processors with a bus speed of 533MHz, reduced power consumption with support for mobile Pentium 4 processors, large memory support with up to 2GB of DDR SDRAM, integrated high speed USB 2.0 at 40 times the 478-pin PGA ZIF socket for Intel® Pentium 4 and Celeron speed of USB 1.1 and support for a variety of flat panel and TV-out display interfaces using ADD cards. RadiSys processors at 400MHz and has also designed a companion LVDS ADD card for use with LVDS flat panel displays. 533MHz FSB EMBEDDED FEATURES Support for mobile Pentium 4 To address the needs of specific embedded applications, the BG845G also features a build option for dual processor Ethernet ports using either 10/100 or Gigabit Ethernet controllers for the latest high bandwidth communications Intel® 845GV chipset (845G option) applications. Up to 2GB DDR SDRAM Support for riser cards facilitates the use in low profile chassis and internal connectors, such as keyboard and Intel® Extreme Graphics mouse, enables direct connections to the motherboard inside chassis such as used in test and measurement ADD Slot (845GV equipment. A build option for a write-protected BIOS, a BIOS socket and an ITP port lends the board well for use ADD and 4X AGP Slot (845G in gaming applications which are subject to regulatory control. A TCPA compliant module also enables the only) BG845G to be used as a secure computing platform, particularly important for transaction terminals. Single or dual Ethernet (option) 10/100 or Gigabit Ethernet EMBEDDED SUPPORT (option) Unlike commercial motherboards, RadiSys is able to meet the true needs of the embedded marketplace offering a AC97 audio superior level of support demanded by embedded equipment manufacturers. This includes long life products (up TCPA security (option) to 5 years), revision control, product life cycle management, engineering support and high quality design and 3 PCI slots manufacture. The combined benefits all serve to offer customers a low cost of ownership with Endura System management and fan control motherboards. Power management Watchdog timer Phoenix ServerBIOS* 6 USB 2.0 ports 2 serial ports Parallel port PS/2 keyboard and mouse ports (also via internal headers 13 GPIO lines (supports an LCD character display) 9.6" x 9.6" microATX ROHS 6 Compliant ENDURA BG845G DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 1 of 4 Endura BG845G Specifications FEATURE FUNCTION DESCRIPTION Processor Socket 478-pin µPGA socket for Pentium 4 processors ITP port (build option) FSB 400MHz and 533MHz Chipset - Intel® 845GV with ICH4 (long life embedded chipset) or Intel® 845GV with ICH4 (option for 4X AGP support, but not embedded) Memory Sockets Two 184-pin DIMM sockets for DDR SDRAM (PC1600 and PC2100) Capacity Maximum 2GB ECC/Parity Not supported Video VGA Integrated Intel® Extreme graphics with 48MB dynamic memory Resolution 1600 x 1200 pixels with 32-bit color support ADD AGP Digital Display card support with dual DVO channels for TMDS (PanelLink) LVDS and TV-out interfaces AGP 4X 1.5V cards supported with 845G chipset only AGP ADD cards supported with 845GV and 845G chipsets Audio AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Rear Connectors Mic, Line Out and Line In (dependent on SKU) jacks on rear panel On-board CD In, AUX In, Line Out ATAPI connectors on-board Connectors Network Controllers Single or dual Intel® 82551ER controllers for 10/100 Ethernet Single or dual Intel® 82540EM controllers for Gigabit Ethernet IEEE 802.3 10Base-T, 100Base-TX, 1000Base-T compatible Rear Connectors Two RJ45 rear panel connectors each with two LEDs to indicate line activity, link integrity and line speed with on-board header to connect to external duplicate LEDs Remote/Wake-up Remote boot and wake-up supported by 82540EM controller IDE Devices Two Ultra ATA/100 interfaces via 40-way boxed header Drive Types Supports ATAPI, LS120 and ZIP drives Floppy Types Supports standard 3.5" and 3-mode floppy drives Mechanical Dimensions 9.6" x 9.6", 4-layer PCB, microATX compliant I/O VGA Via 15-way D-type Parallel Port 25-pin D-type supporting bi-directional, EPP and ECP modes Serial Ports COM1 on 9-pin D-type, COM2, via 10-way header USB 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers Keyboard & Mouse Swappable PS/2 connectors, on-board header connectors Front Panel Connectors for power control and status, Reset, IDE activity, LED, speaker and intrude detect GPIO 13 GPIO lines via header (also supports an LCD character display) Expansion Slots PCI 3 dedicated bus master 32-bit PCI 2.2 slots Riser Support PCI riser extension on Slot 2 , multi-slot riser support on Slots 2, 3 and 4 System Monitoring Voltage, temperature and fans Management Automatic CPU fan speed control (O/S independent) Anti-tamper security Watchdog Watchdog timer SMBus connector Security - TCPA compliant TPM module Power - PCI PME, ACPI 1.0b, APM 1.2 Management Power Supply Type Support for hard- and soft- switched power supplies Power 91W with a 2.8GHz Pentium 4 and 57W with a 1.7GHz Pentium 4-M with 1GB SDRAM, measured running Windows* 2000 power stress software Consumption Battery - Lithium coin cell (5 years operating life typical) BIOS Type Based on Phoenix ServerBIOS 3.0 Special Features Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection Drivers Operating Systems Windows 2000, NTe, XP, XPe, Linux, Microware OS-9, others on request Safety - Evaluated in accordance with UL60950, EN60950 and IEC60950 Compliance EMC - Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B Compliance Environment Operating 0°C to 55°C Temperature ENDURA BG845G DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 2 of 4 Storage -40°C to 85°C Temperature Relative Humidity 5% to 95% non-condensing ENDURA BG845G DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 3 of 4 Ordering Information Toll-Free: 800-950-0044 Phone: 503-615-1100 Support: 866-385-6167 Call for pricing and availability. Refer to the order codes below. Contact Information DESCRIPTION The following base configurations are available with embedded www.radisys.com Pentium 4, Celeron and mobile Pentium 4 processors. info@radisys.com Channels and other locations BG845GV uATX with single !0/100 Ethernet, RoHS PRODUCT CODE: BGGV1L03-0-0 BG845GV uATX with single !0/100 Ethernet, 2.4GHz Pentium 4 and Corporate Headquarters fansink, RoHS PRODUCT CODE: BGGV1L03-P24-0 5445 NE Dawson Creek Dr. BG845GV uATX with dual 10/100 Ethernet, RoHS Hillsboro, OR 97124 USA Phone: 503-615-1100 PRODUCT CODE: BGGV2L03-0-0 Fax: 503-615-1121 I/O shield for single Ethernet, RoHS Toll-Free: 800-950-0044 Support: 866-385-6167 PRODUCT CODE: ATX-L BG IOSHLD EMEA: +49 811 555457-0 I/O shield for dual Ethernet, RoHS China: 86.21.50804062 PRODUCT CODE: ATX-2L BG IOSHLD 2006 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. ENDURA BG845G DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 4 of 4