PROMENTUM ATCA-2210 ATCA Switch and Control Module PRELIMINARY PRODUCT DESCRIPTION The ATCA-2210 is an industry first 10 Gigabit (10GE) capable AdvancedTCA switch and control module. It is ideal for next generation network elements in 3G-wireless and wire-line infrastructure. It meets or exceeds the switching requirements for applications like Radio Network Controllers (RNC/BSC), Media Gateways, IMS (CSCF, Application and Media servers) and IPTV. The ATCA-2210 is architected to be the heart of a cost-effective ATCA platform, providing highly integrated, centralized common equipment functions – switching, shelf management, network timing and system management functionalities. It incorporates innovative and modular design to provide a highly configurable solution. For example, the designer can configure the switch to suit the requirements for the architecture by choosing optional capabilities like network timing and system management as needed. The NEBS compliant carrier grade ATCA-2210 includes comprehensive switching and blade management software. 10GE FABRIC TO ENABLE HIGHEST FABRIC INTERCONNECTIVITY IN ADVANCEDTCA FEATURE SUMMARY The ATCA-2210 module is a PICMG 3.0/3.1 (Option 9) compliant switch providing 10GE node-to-node connectivity. With 10GE becoming wide spread in enterprise networks, it has become the cost effective high Single slot ATCA PICMG 3.0/3.1 bandwidth switching technology for next generation architectures in carrier grade solutions. Integrated silicon compliant module support for priority queues, packet classification and flow control enable implementing stringent timing (TDM) Industry first 10GE fabric in sensitive applications like Media Gateways using this fabric technology. AdvancedTCA – highest bandwidth user plane The ATCA-2210 incorporates a 20-port 10GE switch using 14 ports for node connectivity (19” or 23” rack sizes), 4 connectivity per node slot ports for up/cross links and the remaining 2 ports for internal use. The four 10GE uplinks enable designers to Highly integrated fabric module implement full non-blocking multi-shelf system solutions for up to 4 shelves. The switch silicon is capable of 10GE fabric interface supporting both 1GE and 10GE through auto negotiate function and hence the node slots can automatically 1GE base interface connect to the switch in either of these two modes. This enables use of legacy line cards with 1GE node Optional COM Express site connectivity. The switch supports both front and rear I/O for its fabric up/cross links. It has four 10GE interfaces with SAS storage (XFP connectors) in the front and three 10GE electrical (CX-4) or four 1GE optical interfaces (SFP connectors) in Optional Network Timing ?the rear. Sub-system Optional Shelf Manager 1GE ETHERNET BASE SWITCHING ?WITH ONE 10GE AND SIX 1GE UP/CROSS LINKS 20-port 10GE PICMG 3.1 (option The ATCA-2210 incorporates a 24-port 1GE Ethernet switch, which provides PICMG 3.0 compliant Gigabit 9) fabric switch Ethernet connectivity. The base interface uses 14 ports for node connectivity (supports 19” and 23” racks), 6 ports 14 10GE links to user slots for up/cross links, 1 port for redundant switch slot, 1 port for shelf manager, 1 port for onboard COM Express site 4 10GE links for external and 1 port for local management processor. Like the fabric interface, the switch supports both front and rear I/O connections (up/cross links) for the base interface. There are one 10GE (XFP), four 1GE (SFP) in the front and four 1GE (SFP) in the rear. As as front I/O a build option, the front 4 ports can be diverted to the rear for rear I/O. 24-port GE PICMG 3.0 Base SWITCHING AND BLADE MANAGEMENT SOFTWARE switch The ATCA-2210 module design incorporates a powerful PowerQUICC processor for its local management 14 1GE links to user slots functions. This processor is used for managing the switching silicon and is also the host for the switching and 1GE link to redundant switch blade blade management software. The ATCA-2210 comes complete with L2/L3 software for powerful networking 1 10GE and 4 1GE links for capabilities for the base and fabric interfaces. It takes full advantage of all the silicon supported functions such as external connections priority queues, VLAN tagging, per port flow control, multi-cast groups, link aggregation, forwarding table entries, (up/cross links) as front I/O etc. Blade management software included with the ATCA-2210 provides Application Programming Interfaces (API) to set-up and control these functions. The switching software includes support for Layer 2 (IEEE 802.3), spanning tree protocol (STP-IEEE 802.1D), PROMENTUM ATCA-2210 DATA SHEET | © 2006 RadiSys Corporation | ID: 11-28-2007 8 | Page 1 of 6 The switching software includes support for Layer 2 (IEEE 802.3), spanning tree protocol (STP-IEEE 802.1D), Rapid STP (RSTP-IEEE 802.1W), Multiple STP (MSTP-IEEE 802.1S), VLAN support (IEEE 802.1Q), GARP and GMRP (IEEE 802.1D) and GVRP (IEEE 802.1Q), flow control in accordance with 802.3 clauses 31 and 33, and switch statistics. Other functions include switch fabric watchdog, MAC address assignment, Jumbo frame support and multicast/broadcast. Wire-speed L2 and L3 switching Limited Layer 3 software is also supported in the fabric interface. This support includes switching of frames with Support for 4K IEEE 802.1Q arbitrary upper-layer protocols, wire-speed layer 3 packet routing based on flexible packet classification, IPv4/IPv6 VLANs and IP Multicast, forwarding up to 8K layer 3 routing table entries, DiffServ processing, including flexible Packet classification/filtering Link Aggregation Microflow classification and filtering, metering, and priority/congestion management, etc. CoS and port mirroring The ATCA-2210 supports a choice of interfaces for system manager – CLI, SNMP and RMCP along with being Blade management through SA Forum HPI1.1 compliant. CLI and SNMP Integrated Shelf Management HIGHLY INTEGRATED COMMON EQUIPMENT HPI 1.1 compliant The ATCA-2210 is architected to enable performance solutions and yet be cost effective. It incorporates many of programmatic interface the functions that would otherwise take up revenue producing node slots in a platform. Examples of these Integrated PICMG COM Express functions include system management (used for OAMP/FCAPS), network timing for synchronization and clocking site with optional SAS/SATA and shelf management. storage support for on board OPTIONAL ONBOARD COM EXPRESS SITES TO ENABLE A PENTIUM OR POWERPC CPU WITH system management or SAS/SATA DISK SUPPORT co-processing functions The ATCA-2210 includes an onboard COM Express site with support for a SAS/SATA 2.5” disk. COM Express is a Rear Transition Module for rear PICMG standard enabling a modular processor and memory module without front panel requirement. Typically, I/O capability the I/O for the COM Express module is included in the baseboard. The PICMG compliant COM Express site in CGLinux Operating System ATCA-2210 enables a Pentium™ or PowerPC™ compute module to run a system manager application in the same slot as the switch slot. Such integration saves valuable revenue producing slots for the platform configuration. For logging and other data storage purposes, the COM Express site also supports 24x7 capable SAS/SATA drives. The COM Express module is independent of the switch’s local management processor and can be redundant with the COM Express module in the standby switch. The two COM Express sites in the switch slots are interconnected through the backplane for redundancy support. OPTIONAL NETWORK TIMING SUB-SYSTEM (NTS) The ATCA-2210 includes integrated support for synchronization and clocking as specified in the AdvancedTCA standard. It is capable of providing Stratum 3 timing for the shelf based on external BITS/SSU or clock input (8 KHz or 19 MHz), recovered clocks from a line cards or a local stabile clock. The I/O for BITS/SSU/clocks is included in the Rear Transition Module. The NTS is capable of supporting multi-shelf architectures. The NTS is compliant with GR-499-CORE, GR-1244-CORE, GR-253-CORE, G.703, G.783, G.803, G.812, and G.813 standards specifications. INTEGRATED SHELF MANAGEMENT The ATCA-2210 contains integrated ATCA shelf management, providing a cost-effective way to control the shelf hardware, per PICMG 3.0, without requiring additional modules. The shelf manager implements IPMI management, FRU management, shelf environment management for power, thermal, and e-keying functions according to SAForum HPI 1.1 compliant interfaces. However, this shelf management function of the module may be disabled to support use of the ATCA-2210 switch with a different shelf manager. The powerful architecture of the shelf manager is capable of supporting multiple shelves and makes it ideal for building multi-shelf systems in a rack with a unified shelf management. Overall, the ATCA-2210 is a state-of-the-art switch and control module capable of providing significant performance improvement over the current generation. Its high performance (10GE switching), high integration (saving costly node slots) and innovative architecture (configure per need) makes it unique and ideal for RNC/BSC, Media Gateways, IMS and IPTV network elements. PROMENTUM ATCA-2210 DATA SHEET | © 2006 RadiSys Corporation | ID: 11-28-2007 8 | Page 2 of 6 ATCA-2210 Hardware Block Diagram ATCA-2210 Software Architecture Overview PROMENTUM ATCA-2210 DATA SHEET | © 2006 RadiSys Corporation | ID: 11-28-2007 8 | Page 3 of 6 Promentum ATCA-2210 Specifications Feature Function Description Physical Dimensions 8Ux6HPx280mm ATCA, single slot Compliance PICMG 3.0 and PICMG 3.1 Ethernet Base interface links 1GE links to 14 slots Base Up/cross links 1 10GE XFP (front) and 3 1GE SFP (front) or 6 GE SFP to rear Fabric Interface links XAUI to 14 slots Fabric Up/cross links 4 10GE XFP to front or 4 1GE SFP to the rear L2 (Base & Fabric) Throughput Wire speed for 64-byte frames (1.5 Mpps per port) Latency 4.33 m s per RFC2544 Forwarding Tables Up to 16K entries (L2/L3), with build option for 48K Packet Buffer Size 2MB with build option for 32 MB VLANs Up to 4096 IEEE 802.1Q VLANs (MAC/port/subnet/protocol) Link Aggregation Per IEEE 802.3ad, uplink ports only QoS Provisioning on L2/3/4 and IEEE 802.1p tag, 1024 Traffic Classes Spanning Tree 802.1d (STP), 802.1w (RSTP), 802.1s (MSTP) L3 (future) Fabric only Packet Forwarding IPV4, IPV6 and IP Multicast Routing Table 8K entries Routing Protocols RIPV2, BGP and OSPF DiffServ Supported Switch Management CLI Full-featured CLI for controlling all switch features SNMP Agent SNMPv2c and SNMPv3 Agent SNMP MIBs Support for all switch features via standard and enterprise MIBs. Standard MIBs include: RFC1213, RFC1907, RFC2863, RFC2011, RFC2012, RFC2013, RFC1493, RFC2674, RFC2665, RFC2819, IEEE8023-LAG-MIB Shelf Management Operation HW Mgmt per ATCA PICMG 3.0. Includes IPMI management, FRU HW management, shelf environment management (power, cooling, E-keying), and shelf annunciator management. SAF SAI-HPI-B.01.01 (HPIv1.1) compliant API IPMI over LAN (RMCP/IP) per PICMG 3.0 Mgmt Interfaces SNMP (enterprise MIB) CLI (custom) COM Express Site with PICMG COM Express PICMG COM Express standard Type 3 or Type 5 recommended SAS/SATA support Specification SAS/SATA 2.5” SAS drive supporting 24x7 operation Connectors, Front Panel Mgmt Ethernet Link RJ-45 connector (10/100 Ethernet) Serial Console RJ-45 connector Base Ethernet Uplinks 4 1000Base-SX Small Form Factor LC connectors Base Ethernet Uplink 1 XFP connectors to provide 10GE Fabric Ethernet 4 XFP connectors to provide 10GE Uplinks RTM (optional) Interfaces 2 BITS/SSU (DS1/E1) clock inputs 2 reference clock inputs/outputs 4 digital alarm relay outputs per PICMG 3.0 DA-15P connector 1 digital isolated alarm reset inputs per PICMG 3.0 DA-15P connector 3 SFP connectors for Fabric Interface Uplinks 4 SFP connectors for Base Interface Uplinks Connectors, Backplane Power, IPMB ATCA Zone 1, P10 connector Clocking ATCA Zone 2, J20 connector 10GE Fabric PICMG 3.1 Option 9 compliant Ethernet Base, Fabric ATCA Zone 2, J24 connector 20, 21, 22, 23, 24 LEDs - Hot Swap (Blu), OOS (Red/Yel), Power Good (Grn), Blade Status (Yel), GbE Port Status (Grn/Yel), GbE Link Status (Grn/Yel) Power - TBD Environment Ambient Temperature 0° – 55°C (operating), -40° – 70°C (non-operating) Relative Humidity (non-condensing) 5 – 90% (operating), 5 – 90% (non-operating) Regulatory Safety UL/EN/IEC 60950-1, CSA 22.2 PROMENTUM ATCA-2210 DATA SHEET | © 2006 RadiSys Corporation | ID: 11-28-2007 8 | Page 4 of 6 EMC FCC Part 15, Class B, EN 55022: 1998, Class B EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8 Warranty - Two years, parts only PROMENTUM ATCA-2210 DATA SHEET | © 2006 RadiSys Corporation | ID: 11-28-2007 8 | Page 5 of 6 Ordering Information Toll-Free: 800-950-0044 Contact Information Phone: 503-615-1100 Support: 866-385-6167 www.radisys.com Call for pricing and availability. Refer to the order codes below. info@radisys.com Channels and other locations ATCA-2210 Switch and control module with PICMG 3.0 Base interface, PICMG 3.1 10GE Fabric interface, with optional shelf manager, Network Timing and COM Express module with SAS/SATA disk support. Includes blade management and shelf Corporate Headquarters management software. 5445 NE Dawson Creek Dr. Order code: A2210-SWH-CFG01 Hillsboro, OR 97124 USA Phone: 503-615-1100 Includes: 4x 1GE SFP (base), 4x 10GE XFP (fabric), 1x 10GE XFP Fax: 503-615-1121 (base) Toll-Free: 800-950-0044 Support: 866-385-6167 EMEA: +49 811 555457-0 China: 86.21.50804062 2006 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. PROMENTUM ATCA-2210 DATA SHEET | © 2006 RadiSys Corporation | ID: 11-28-2007 8 | Page 6 of 6