RAD TECHNOLOGIES D8SL
Specifications
Configuration
Programmable via the DXC management system
Connector
Single 25-pin D-type female connector for all ports
Framing
G732N – 2 frames per multiframe. G732S – 16 frames per multiframe unframed
Interface Type
SHDSL
Line Type
Single unloaded and unconditioned copper twisted pair
Nominal Line Impedance
135?
Number of Ports
4 or 8
Performance Monitoring
Per ITU-T Rec G.991.2
Physical
Occupies a single slot in a DXC-8R, DXC-10A or DXC-30 chassis
Power Consumption
18.5W at maximum data rate on all the ports
Standard
ITU-T Rec. G.991.2
Standards
ITU-T Rec. G.704, G.703, G.732
Timing
D8SL, D4SL central site module: locked to DXC master clock. D4SL remote site module: locked to the central site module
Typical Ranges
See Table 1
Features
- Four- and eight-port SHDSL E1 link modules for the DXC family
- ITU-T Rec. G.991.2 SHDSL compliance
- Range up to 8 km (5 mi) over 24 AWG 2-wire cables
- Up to 2048 kbps per port over existing 2-wire copper cables
- User-selectable data rates between 64 kbps to 2048 kbps
Datasheet
Extracted Text
Data Sheet DXC Modules D4SL, D8SL 2-wire SHDSL E1 Link Modules 4- and 8-port SHDSL I/O modules for the DXC family of modular cross-connects • Four- and eight-port SHDSL E1 link modules for the DXC family • Up to 2048 kbps per port over existing 2-wire copper cables • User-selectable data rates between 64 kbps to 2048 kbps • Range up to 8 km (5 mi) over 24 AWG 2-wire cables • ITU-T Rec. G.991.2 SHDSL compliance D4SL and D8SL are four- and eight-port Each port is a multirate SHDSL modem I/O modules that use Single-pair operating at user-selectable data rates High-speed Digital Subscriber Line (SHDSL) that are multiples of 64 kbps (1 timeslot), technology, according to up to 2048 kbps (32 timeslots). Payload ITU-T Rec. G.991.2. capacity per module is up to 128 timeslots (8.192 Mbps) or 256 timeslots (16.384 Mbps). Table 1 lists typical range data versus payload data rate. The Access Company D4SL, D8SL 2-wire SHDSL E1 Link Modules The D4SL/D8SL modules can be configured Timeslot traffic through any port can be Setup, control, and diagnostics can be to operate in accordance with ITU-T Rec. cross-connected with any other DXC performed using an ASCII terminal G.991.2. Annex B, for compatibility with module (excluding another D4SL/D8SL connected to the supervisory port, or by European (or similar) networks. port or module) the RADview SNMP based management system. Each port transfers either G732N or D4SL can operate as a remote solution by G732S multiframes (2 or 16 frames per using an SHDSL uplink to connect the unit D4SL/D8SL modules operating in the multiframe, respectively). The user can to another DXC or other standard SHDSL DXC-30 chassis require a fan tray for also enable the CRC-4 option, specified in equipment. external cooling (see Ordering). The ITU-T Rec. G.704 and G.703, DXC-8R and DXC-10A chassis do not Diagnostic capabilities include local and independently for each remote port. require additional cooling. remote loopbacks on the link, BER test on All ports can operate in unframed mode to the active timeslots, and inband The modules occupy one I/O slot in the transparently transmit unframed 2.048 code-activated loopbacks specified in DXC-30, DXC-10A or DXC-8R chassis. Mbps signals. ANSI T1.403. Performance statistics for the link may be obtained and analyzed via The modules can operate as a central the DXC management system. SHDSL solution opposite RAD’s ASMi-52 SHDSL modems or FCD-IP and FCD-IPM access devices. The units also link with other vendors’ ITU-T G.991.2 compatible SHDSL remote terminal units. Figure 1. Aggregating SHDSL Services over a High-Speed Backbone Data Sheet INTERNAL E1 PORTS GENERAL Specifications Framing Indicators per Port EXTERNAL PORTS G732N – 2 frames per multiframe SYNC LOS (red) – G732S – 16 frames per multiframe On: not synchronized with the remote unit Number of Ports Unframed Flashing: handshaking with the remote 4 or 8 unit Standards Interface Type SYNC LOS (green) – ITU-T Rec. G.704, G.703, G.732 SHDSL On: synchronized with the remote unit Standard Flashing: synchronizing with the remote DIAGNOSTICS ITU-T Rec. G.991.2 unit Performance Monitoring TEST (yellow) – Line Type Per ITU-T Rec G.991.2 On: test is active on the port Single unloaded and unconditioned copper Loopbacks twisted pair Configuration User-activated local and remote loopback Programmable via the DXC management Nominal Line Impedance on each port system 135Ω Remote loopback activation by inband FT1 code (on all timeslots, or on specific Timing Typical Ranges timeslots) D8SL, D4SL central site module: locked to See Table 1 Remote timeslot loopback DXC master clock Connector Remote loopback on the remote unit D4SL remote site module: locked to the Single 25-pin D-type female connector for BER testing on each port central site module all ports Power Consumption 18.5W at maximum data rate on all the ports Physical Occupies a single slot in a DXC-8R, DXC-10A or DXC-30 chassis For comparison of DXC chassis, see Table 2. For the list of DXC I/O modules, refer to the DXC-8R/10A/30 folder. Table 1. Typical Range vs. Payload Data Rate Data Rate Range @ 26 AWG [kbps] [km] [mi] 256 6.5 4 512 5.6 3.5 768 4.55 2.8 1024 3.65 2.7 1536 3.2 2 2048 3 1.85 Note: Typical ranges are based on error-free real-line laboratory tests without noise. 772-132-09/08 Specifications are subject to change without prior notice. 1988–2008 RAD Data Communications Ltd. The RAD name, logo, logotype, and the terms EtherAccess, TDMoIP and TDMoIP Driven, and the © product names Optimux and IPmux, are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their respective holders. Data Sheet D4SL, D8SL 2-wire SHDSL E1 Link Modules OPTIONAL ACCESSORIES Ordering CBL-D4SL-STUC DXC-M-8SL-E1 Adapter cable for D4SL (central site 8-port, 2-wire SHDSL E1 link module module), splits a DB-25 connector into 4 × RJ-45 balanced connectors DXC-M-4SL-E1/$ 4-port, 2-wire SHDSL E1 link module CBL-D4SL-STUR Legend Adapter cable for D4SL (remote site module), splits a DB-25 connector into $ Line interface: 4 × RJ-45 balanced connectors STUC central site module STUR remote site module CBL-D8SL-RJ45/X Adapter cable for D8SL, splits a DB-25 connector into 8 × RJ-45 balanced connectors DXC-30M-FT/~ Fan tray (for the DXC-30 chassis only) Legend ~ Fan tray power supply: AC 100 to 240 VAC 48 –48 VDC Table 2. DXC Chassis Comparison Table Feature DXC-8R DXC-10A DXC-30 DXC-100* Height 1U 1U 3U 6U per nest Maximum number of ports 32 40 120 688 (8 nests) Number of I/O slots 4 5 15 86 (8 nests) System redundancy Built-in None Optional Optional E1, T1, E3, T3, STM-1 modules 9 9 9 9 XDSL, inverse multiplexing modules 9 9 9 – n x 56/64 kbps modules 9 9 9 9 Router, OC-3 modules – – – 9 ASCII, SNMP, RADview management 9 9 9 9 Note: The DXC-8R/10A/30 modules and DXC-100 modules are not interchangeable. International Headquarters North America Headquarters 24 Raoul Wallenberg Street 900 Corporate Drive Tel Aviv 69719, Israel Mahwah, NJ 07430, USA Tel. 972-3-6458181 Tel. 201-5291100 Fax 972-3-6498250, 6474436 Toll free 1-800-4447234 E-mail market@rad.com Fax 201-5295777 E-mail market@radusa.com The Access Company www.rad. com
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the D8SL?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

RAD DXC-8R/10A/30/30E Includes 1U-high chassis with 5 I/O slots, one power supply, and common logic ...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods