® ® PICMG 1.3 Intel Core™ i7/i5/i3/Pentium LGA1156 with PEAK 877VL2 Q57 2 x PCI Express Gigabit LAN/6 x SATA/8 x USB2.0 Main F Main Features eatures ® Œ 6 x SATA, 8 x USB2.0, 2 x COM, 1 x Parallel Œ Onboard XGI Z11 graphic for Intel Core™ i7 processors ® ® Œ Support Non-ECC Dual Channel DIMM-DDR3 1066/1333 MHz up Œ Support Intel LGA1156, Core™ i7/i5/i3/Pentium to 8GB Œ 1 x 82574 PCI Express Gigabit Ethernet ® Œ Intel AMT 6.0 Œ 1 x 82578DM Gigabit Ethernet Product Overview ® ® PEAK 877VL2 is PICMG 1.3 full-size Single Board Computer (SBC), which supports Intel Core™ i7/i5/i3/Pentium processors with Hyper-Threading technology. ® ® The Intel Core™ i7/i5/i3/Pentium supports dual channel non-ECC DDR3 1066/1333 MHz memory in two DIMM slots and an XGI Z11 integrated graphics controller. The Q57 Express Chipset PCH manages SATA HDD ports, parallel port. Furthermore, it supports other versatile I/O ports such as two serial ® ® ports, eight USB ports, and two PCI Express Gigabit LAN ports. The PEAK 877VL2, with Intel Core™ i7/i5/i3/Pentium and PCI Express LAN, offers a great solution for advanced industrial application that requires processing performance. Specifications CPU Support Œ Analog VGA Interface: 230MHz pixel clock support CRT display up to ® ® Œ Intel LGA1156, Core™ i7/i5/i3/Pentium 1600 x 1200 @ 70Hz 16M colors ® Œ Intel Quad Core™ i5/i7 I/O Interfaces Main Memory Œ USB2.0: 8 ports (2 on board, 4 to backplane), 2 ports through I/O Œ 2 x 240pin DIMM, for up to 8GB dual channel Non-ECC DDR3 Bracket 1066/1333 SDRAM Œ Serial port: 2 port, with 2 x 5pin headers (COM 1 and COM 2) ® Œ SATA HDD: 6 ports, Support RAID 0/1/5/10 and Intel Matrix Storage Chipset ® Technology (Intel MST) ® Œ Intel Q57 Express Chipset PCH Œ Parallel port: 1 x 26pin connector Œ IrDA: 1 x 5pin header BIOS Œ GPIO: Supports 4 sets general purpose I/O each with TTL level (5V) Œ AMI BIOS interface Œ Plug and play support Œ On-board buzzer x1 Œ Advanced power management and advanced configuration & power Œ Power LED/Power On/Reset/SMBUS: 2 x 8 pin header interface support Œ 1 x 4-pin fan connector (for CPU); 1 x 3-pin fan connectors (for On-board LAN System) ® Œ 1 x Intel 82578DM PHY for AMT 6.0 Œ IPMB interface through PICMG 1.3 Golden-finger ® Œ 1 x Intel 82574L PCI Express Gigabit Ethernet Œ I/O On SBC Bracket Œ Support boot from LAN (PXE) Œ 1 x VGA DB-15 connector Œ 2 x RJ45 with LED Œ 2 x RJ45 Gigabit Ethernet LAN port Œ 2 x USB2.0 Ports Display Œ Integrated graphic engine by XGI Volari Z11 GPU with DDR2 SDRAM Watchdog Timer through PCIe 1 x Interface Œ 1 minute increments from 1 to 255 minutes PICMG 1.3 www.nexcom.com Block Diagram DDR3 1066 / 1333 MHz Power Gen. DDR3 Channel A 3VSB AND 5VSB LGA1156 Processor Havendale PCI-E x16 Golden Finger x16 or 2 x8 DDR3 POWER 1.5V/0.75V DDR3 Channel B VTT DMI 1V05 2GB/s BIOS SPI P18 VRD 11.1 Volari PCI-E x1 VGA CRT VCORE Z11 SPI DMI FDI PCI-E x1 LAN 2 1V8 82574 PCI-E x1 LAN1 82578DM PCH VAXG INTEL PCI-E x4 Golden Finger x4 or 4 x1 0 / 1 Q57 Breaket USB 2.0 2 / 3 Internal Conn. Golden Finger USB 2.0 Back Plane PCI Bus Golden Finger PCI BUS SATA LPC Clock SMBUS ADDRESS USB Ports x 4 MEMORY CHANNEL-A DIMM-0 0A0H~0A1H MEMORY CHANNEL-A DIMM-1 0A2H~0A3H SATAII MEMORY CHANNEL-B DIMM-0 0A4H~0A5H SATA Ports x 4 MEMORY CHANNEL-B SLOT-1 0A6H~0A7H CLOCK GEN. 0D2H Golden Finger CLOCK BUFFER 0DCH SATA Ports x 2 COM port x 2 KB/MS SUPER IO W83627HG Clock Gen. FAN AND SENSOR CK505 ICS9DB108 Print Port Œ 1 second increments from 1 to 255 seconds Ordering Information Œ On-chip RTC with battery backup Œ 1 x External Li-lon battery Œ PEAK 877VL2 (P/N:10P0877VL00X0) ® ® PICMG 1.3 Full-Size SBC, Intel LGA1156, Core™ i7/i5/i3/Pentium with System Monitor ® Max 8GB, DDR3 DIMM, VGA integrated, Intel 82574L PCI Express Œ 6 Voltages (+3.3V, +5V, +12V, Vcore) memory, VTT Gigabit Ethernet x2, Serial ATA x4 Œ 3 Temperatures (For CPU and System) Œ 2 FAN speed monitors (1 for CPU and 2 for System FAN) Dimensions Œ PICMG 1.3 SHB Œ Dimension: 338.58mm (L) x 126.39mm (W) (13.3" x 4.9") Power Input Œ Power source from backplane through golden finger and AUX +12V Œ Support ATX/AT power supplies Œ +12V/+5V/+3.3V/+5Vsb Environment Œ Board level operating temperatures: 0°C to 60°C Œ Storage temperature: -20°C to 85°C Œ Relative humidity: 10% to 90%, (Non-condensing) Certifications Œ CE approval Œ FCC Class A PICMG 1.3 We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 03/05/2014 DIMM 0 DIMM 0 USB 2.0 Display DDR3 Ch B DDR3 Ch A SATAI LPC Bus DMI BUS FDI BUS PCI-E x 16 PCI PCI-E x 4 PCI-E x 4 PCI-E x 8 PCI-E x 8