NEXCOM PEAK 777VL2
Specifications
Form Factor
PICMG
Ethernet Chipset
Intel 82574L
System Chipset
Intel ICH
BIOS
Award System BIOS; Plug & Play support; 8M-bit flash ROM
Chipset
Intel G41 Graphics Memory Controller Hub (GMCH); Intel ICH7/ICH7R I/O Controller Hub
CPU
Supports Intel LGA775 Core 2 Quad/Core 2 Duo/Pentium 4/Pentium D/Celeron D processors; Intel Embedded Processors List (Intel Longevity CPU); Intel Core 2 Quad Processor QP400; Intel Core 2 Duo Processor E7400 & E5300 & E6400 & E4300 & E2160; Intel Pentium 4 Processor 651 & 551 & 531; Intel Celeron D Processor 352 & 341; Intel Celeron Processor 440; 533/800/1066 MHz System Bus
Dimensions
338.58mm(L) x 122mm(W); (13.3” x 4.8”)
Display
Intel G41 GMCH Integrated; CRT: 1 x DB15 VGA connector
I/O
Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH; 2-pin header for SMB; 2-pin header for reset; 2-pin header for power on switch; 2-pin header for power LED; 2-pin header for HDD LED
I/O on bracket
1 x DB15 VGA connector; 2 x RJ45 GbE port; 1 x PS2
ISA Support
Through PCI to ISA Interface (ITE 8888); No ISA Master Devices but ISA DMA Devices; Maximize ISA Slot support up to 3
On-board LAN
2 x Intel 82574L PCI Express Gigabit Ethernet LAN; 2 x RJ45 with LED; Supports Boot From LAN (PXE); Supports Wake on LAN (When 5Vsb power available, and for LAN 2 only)
On-board RTC
On-chip RTC with battery backup; 1 x External Li Battery; Torrance less than 2sec (24 hours) under 25°C;
Operating Temperature
0°C to 60°C
Parallel Port
1 port, with 2x13 box-header(2.0mm)
Power Input
Power source from backplane through PCI/ISA Golden Finger; Supports both AT or ATX Power Supplies (Automatically, BIOS default :AT Mode); When change to ATX, the BIOS default setting is as follows: POWER -SUPPLY TYPE--> [ATX] AUTO PWR-FAILURE RESUME -->[ON]; +3.3V is Converted from +5V and not directly from Backplane or Power Supply; +5Vsb (Standby power) is connected from Backplane through 3 pins Connectors; 4 Pins +12V Power Input Connector
Processor
Intel Pentium D
PS2
1 x 6-pin JST connector(2.0mm) for KB/Mouse
Relative humidity
10% to 90% (Non-condensing); Non-operating 5% to 95%, non-condensing
SATA
4 ports
Serial Port
2 ports, with 2x5 box header(2.0mm), supports RS232 only
Storage Temperature
-20°C to 85°C
System Memory
2 x DIMM, support Dual channel SDRAM DDR3 memory up to 4GB, FSB 1066/800MHz Note: Maximum 4GB. Actual memory size is dynamic based on the OS I/O resource allocation
System Monitor
4 voltage (For +3.3V, +5V, +12V, Vcore); 3 Temperatures (CPU, two external Temperature Sensor); 3 FANs speed (CPU, System and MCH FANs)
USB
6 x USB 2.0, 2 ports through I/O bracket, 4 ports through 1x6 JST
Watchdog Timer
Watchdog timeout can be programmable by Software from 1 second to 255 seconds; Tolerance 15% under room temperature 25°C
Features
- 2 x COM Ports
- 2 x DIMM, Support DDR3 Memory up to 4GB
- 2 x Intel 82574L PCI Express Gigabit Ethernet LANs
- 4 x SATA
- 8 x USB 2.0
- Intel G41 and ICH7/ICH7R
- Single Socket LGA775, Support Intel 45nm/65nm Core 2 Duo/Core 2 Quad with 800/1066/1333 MHz FSB
Datasheet
Extracted Text
® Intel 45nm/65nm Core™ 2 Quad/Duo LGA775 with PEAK 777VL2 2 x PCI Express Gigabit LAN/SATA/VGA/USB2.0 ® ® Intel LGA775 Core™ 2 Quad/Core™ 2 Duo/Pentium 4/ ® ® Pentium D/Celeron D processors with 800/1066/1333 MHz DDR3 DIMM ICH 7 4 x SATA USB2.0 FDD IDE COM1/2 Printer VGA port Dual LAN port PS/2 KB/Mouse ® Intel G41 Main Features ® Single Socket LGA775, Support Intel 45nm/65nm Core™ 2 Duo/ 2 x DIMM, Support DDR3 Memory up to 4GB ® Core™ 2 Quad with 800/1066/1333 MHz FSB 2 x Intel 82574L PCI Express Gigabit Ethernet LANs ® Intel G41 and ICH7/ICH7R 4 x SATA, 8 x USB 2.0, 2 x COM Ports Product Overview ® ® PEAK 777VL2 is the PICMG 1.0 full-size Single Board Computer(SBC), which support Intel 45nm Core™ 2 Duo/Quad technology. Featuring Intel G41 and ICH7 chipsets, ® ® ® the PEAK 777VL2 support socket LGA775 of Intel Core™ 2 Quad/Core™ 2 Duo/Pentium 4/Pentium D/Celeron D processor with 800/1066/1333MHz FSB. ® The Intel G41 supports dual channel non-ECC DDR3 memory up to 4GB maximum with two DIMM slots and an integrated graphics controller. The Souch Bridge ICH7 manages SATA HDD ports, and parallel. Furthermore, it supports other versatile I/O ports such as two serial ports, six USB ports and two PCI Express Gigabit LAN ports. SpeciŢ cations CPU Support On-board LAN ® ® ® ® Supports Intel LGA775 Core™ 2 Quad/Core™ 2 Duo/Pentium 4/Pentium D/ 2 x Intel 82574L PCI Express Gigabit Ethernet LAN ® Celeron D processors 2 x RJ45 with LED ® ® Intel Embedded Processors List (Intel Longevity CPU)” Supports Boot From LAN (PXE) ® Intel Core™ 2 Quad Processor QP400 Supports Wake on LAN (When 5Vsb power available, and for LAN 2 only) ® Intel Core™ 2 Duo Processor E7400 & E5300 & E6400 & E4300 & E2160 ® ® Intel Pentium 4 Processor 651 & 551 & 531 Display ® ® Intel Celeron D Processor 352 & 341 ® Intel G41 GMCH Integrated ® ® Intel Celeron Processor 440 CRT: 1 x DB15 VGA connector 533/800/1066 MHz System Bus I/O Interface Main Memory USB 2.0: 6 ports, 2 ports through I/O bracket, 4 ports through 1x6 JST 2 x DIMM, support Dual channel SDRAM DDR3 Serial port: 2 ports, with 2x5 box header(2.0mm) , supports RS232 only memory up to 4GB, FSB 1066/800MHz Parallel port: 1 port, with 2x13 box-header(2.0mm) Note: Maximum 4GB. Actual memory size is dynamic based on the OS PS2: 1 x 6-pin JST connector(2.0mm) for KB/Mouse I/O resource allocation Fan: 4-pin wafer for CPU; 3-pin wafer for System; 3-pin wafer for MCH Chipset 2-pin header for SMB; 2-pin header for reset; 2-pin headerfor power on switch ® Intel G41 Graphics Memory Controller Hub (GMCH) 2-pin header for power LED; 2-pin header for HDD LED ® Intel ICH7/ICH7R I/O Controller Hub I/O on bracket 1 x DB15 VGA connector BIOS 2 x RJ45 GbE port 1 x PS2 Award System BIOS Plug & Play support 8M-bit fl ash ROM PICMG 1.0 Block Diagram ® Intel LGA775 Core™ 2 Quad/ Core™ 2 Duo/ ® ® Pentium 4/Pentium D/ ® Celeron D processors 800/1066/1333 MHz Channel A DDR3 DIMM ® DDR3 VGA Intel G41 533/667/800 Channel B DDR3 DIMM 2GB/S 4 x SATA PCI ® Intel ICH7/ 8 x USB2.0 GOLDEN (JST connector) FINGER ICH7R Parallel Port KB/MS Super IO ISA (Bracket) GOLDEN ITE8888 FINGER LAN1 LAN2 2 x COM (82574L) (82574L) Storage Dimensions SATA: 4 ports 338.58mm (L) x 122mm (W) (13.3” x 4.8”) Watchdog Timer Environment Watchdog timeout can be programmable by Software from 1 second to 255 Board level operating temperature: 0°C to 60°C seconds Storage temperature: -20°C to 85°C Tolerance 15% under room temperature 25°C Relative humidity: 10% to 90% (Non-condensing) Non-operating 5% to 95%, non-condensing On-board RTC Certifi cations On-chip RTC with battery backup 1 x External Li Battery CE approval Torrance less than 2sec (24 hours) under 25˚C FCC Class A ISA Support Ordering Information Through PCI to ISA Interface (ITE 8888) PEAK 777VL (P/N: 10P0777VL00X0) No ISA Master Devices but ISA DMA Devices ® ® PICMG 1.0 Full-Size SBC, Intel G41 Chipset, Intel LGA775 Core™ 2 Quad/ Maximize ISA Slot support up to 3 ® Core™ 2 Duo/Celeron D processors with 800/1066/1333MHz, Max. 4GB DDR3, DIMM, VGA integrated, 1xGbE, 4xSATA System Monitor PEAK 777VL2 (P/N: 10P0777VL01X0) 4 voltage (For +3.3V, +5V, +12V, Vcore) ® ® PICMG 1.0 Full-Size SBC, Intel G41 Chipset, Intel LGA775 Core™ 2 Quad/ 3 Temperatures (CPU, two external Temperature Sensor) ® ® ® Core™ 2 Duo/Pentium 4/Pentium D/Celeron D processors with 3 FANs speed (CPU, System and MCH FANs) 800/1066/1333MHz, Max. 4GB DDR3 DIMM, VGA integrated , 2 x GbE, 4 x SATA Ports Power Input Power source from backplane through PCI/ISA Golden Finger Supports both AT or ATX Power Supplies (Automatically, BIOS default :AT Mode) When change to ATX, the BIOS default setting is as follow: POWER -SUPPLY TYPE--> [ATX] AUTO PWR-FAILURE RESUME -->[ON] +3.3V is Converted from +5V and not directly from Backplane or Power Supply +5Vsb (Standby power) is connected from Backplane through 3pins Connectors 4 Pins +12V Power Input Connector PICMG 1.0 We reserve the right to change specifi cations and product descriptions at any time without prior notice. Last update: 03/12/2010
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the PEAK 777VL2?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Ultra Low power Embedded Board with Intel Atom E640 processor On-board DDR2 1GB memory, VGA/ LVDS, 1...

Low power Embedded Board with Intel Atom N270 processor and based on Intel 945GSE 3D graphics engi...

3.5" On-board Intel Atom N270 1.66GHz CPU with 24-bit LVDS/Gigabit LAN/CF, Low power Embedded Board...

Low power Embedded Board with Intel Atom Dual Core D525 processor support DDR3 SO-DIMM memory modul...

Low power embedded board with Intel Atom processor D2700 and based on Intel integrated graphics en...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods