Industrial Trading

Description

Full-size Socket 478 Intel Pentium 4 Processor CPU Card withVGA/DDR/Dual LAN (Intel82559 + Intel 82559)

Part Number

PEAK 712VL2

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

PICMG

Ethernet Chipset

Intel 82540

BIOS

Award System BIOS; Plug & Play support; Advanced Power Management support; Advanced configuration & Power Interface support; 4M bits flash ROM

Certification

FCC Class A; CE approval

Chipsets

Intel 845E (MCH); Intel 82801x 1 I/O Controller Hub (ICH2); Firmware Hub (FWH) 4M bits flash ROM x1; PCI V2.2 compliant

CPU Support

Intel Pentium 4 processor with 256K/512K L2 cache on die; Socket 478 CPU featuring 400MHz/533MHz system bus, CPU speed up to 2.4GHz or above

Dimensions

338.58mm(L) x 122mm(W)

Main Memory

DDR DIMM x 2 Support Max Memory size up to 2GB(DDR200/DDR266); ECC support (single bit error correction/Multiple bit errors reporting); Only support unbuffered DIMM

On Board I/O

ITE 8712F-A Super I/O; SIO x 2, with 2 x 16C550 UARTs, 10-pin header x 2; PIO x 1, bi-directional, EPP/ECP support, 26-pin connector x 1; Floppy Disk controller: 34-pin connector x 1; 6-pin mini DIN connector x 1, for PS/2 keyboard/mouse, 5-pin connector x 1(for external keyboard); On Board buzzer x 1; GPIO (4 in 4 out); On board 2-pin header for I^2 C; On board 2-pin header for reset SW / 2-pin for IDE active LED / 2-pin ATX power SW; One 3-pin power header for 3-pin Power Cable connect to Backplane; Board to support ATX Power On function; On board 4-pin Additional Power Source Input; AC97 output, 10-pin header x 1

On Board LAN

Intel 82559 Ethernet controller x 2; 10 Base T/100 Base TX support, full duplex; Intel 82540 support for 10 Base T/100 Base TX; Compliant with PCI V2.1/V2.2, IEEE802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3y, IEEE802.3ab; Drivers support:DOS/Windows, Windows 95/98/2000, Windows NT, Netware 5.0, Linux; RJ45 with LED connector x 2

On Board VGA

ATI M7-CSP32 VGA Controller, 1.5V AGP 4X Interface; 32MB VGA Memory on die; Fully PC 98, PC 99, PC 2001 Compliant; 15 pin CRT connector x1; DVI (TMDS) box header x1; TV-out pin header x1; Support dual independent display (DVI/CRT, DVI/TV, CRT/TV)

On Chip I/O(ICH2)

On board USB port x 2; Ultra DMA33/66/100 support, 40-pin connector x 2. Two pins power connector for DOM (Disk On Module)

PCI to ISA Bridge & ISAMAX Support

ITE 8888Fx 1 PCI to ISA Bridge; Provide 64mA high driving capability to maximize ISA signals for support ISA cards up to 20 on the backplane ISA Slot

Real Time Clock

On chip RTC with battery back up; External Li Battery x 1

Relative Humidity

10% to 90%, non-condensing

System Architecture

Full size SBC with PICMG (PCI+ISA) Golden finger; AGP 2.0 compliant; PCI V2.2 compliant; PICMG 1.0 (Rev.2.0) compliant

System Monitor

Derived from Super IO ITE 8712F-A to support system monitor; 8 voltage (For+1.8V, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Stand-By); One Fan speed for CPU; Temperature sensor header x 2 (one for CPU internal use, another for external system use)

Temperature

Operating:0 to 60°C; Storage:-20 to 80°C

Watchdog Timer

Watchdog timeout can be programmable by Software from 1, 2, 4, 8, 16, 32, 64 seconds

with ATX Power Source)

Soft Power off; Power On by LAN; Power On by Keyboard; Power On by Ring

Features

ATI M7-CSP32 AGP 4X VGA controller w/32MB memory on-die
Intel 845E/ICH2 chipsets
Max. 2GB DDR SDRAM, DDR DIMM x2
Socket 478 Intel Pentium 4 processor with 400/533MHz system bus up to 2.4GHz+

Datasheet

NEXCOM-PEAK 736VL-datasheet.pdf

619 KiB

Download

Extracted Text

Industrial Computer Series PEAK 712VL2(G) R R Full-size Socket 478 Intel Pentium 4 Processor CPU Card w/VGA/Dual LAN/DDR Socket 478 Intel Pentium 4 DDR DIMM x 2 processor speed up to 2.4GHz+ up to 2GB Intel 845E Intel 82801 (ICH2) ATX 5V stand by power connector Intel 82559 10/100 Ethernet Controller Dual LAN ATI M7-CSP32 AGP port 4X VGA controller w/32MB memory on-die DVI Panel interface Intel 82540 Gigabit TV-out Ethernet Controller interface Features Socket 478 Intel Pentium 4 processor with 400/533MHz system bus up to 2.4GHz+ Max. 2GB DDR SDRAM, DDR DIMM x2 Intel 845E/ICH2 chipsets ATI M7-CSP32 AGP 4X VGA controller w/32MB memory on-die Intel 82559 Ethernet x2 (for PEAK 712VL2) or Intel 82559 x1 + Intel 82540 x1 GigaBit Ethernet controller (for PEAK 712VL2G) DIN EN ISO 9001 Certificate:09 100 99240 ISO 9001 Certified Firm Headquarters/ Europe/ USA/ Japan/ NEXCOM International Co., LTD. NEXCOM (UK) LTD. NEX COMputers Inc. NEXCOM Japan Co., LTD. 18F, No. 716, Chung-Cheng Road, Chung-Ho, Cromwell Business Center 46706 Fremont Blvd. 10F, Nakagin-Shiroyama Bldg., 8-16-13, Taipei Hsien 235, T aiwan, R.O.C. 12 Howard Way, Newport Pagnell, Fremont, CA 94538, U.S.A Ginza Chuou-ku Tokyo, Japan 104-0061 T e l:886-2-8228-0500 Milton Keynes, MK 16 9QS U.K T e l: 1- 510-656-2248 T e l: 81-3-3524-4250 T e l: 44 -1908-21 88 77 Fax:886-2-8228-0506 Fax: 1- 510-656-2158 Fax: 81-3-3524-4252 e-mail: nexcom@nexcom.com.tw Fax: 44 -1908-21 88 67 e-mail: sales@nexcom.com e-mail: sales@nexcom-jp. Com http://www.nexcom.com e-mail: sales@nexcomuk.co.uk PEAK 712VL2(G) GPIO (4 in 4 out) 2 On board 2-pin header for I C Specifications On board 2-pin header for reset SW / 2-pin for IDE active LED / 2-pin ATX power SW System Architecture One 3-pin power header for 3-pin Power Cable connect to Backplane Board to support ATX Power On function. Full size SBC with PICMG (PCI+ISA) Golden finger AGP 2.0 compliant On board 4-pin Additional Power Source Input PCI V2.2 compliant AC97 output, 10-pin header x 1 PICMG 1.0 (Rev.2.0) compliant System Monitor CPU Support Derived from Super IO ITE 8712F-A to support system monitor. Intel Pentium 4 processor with 256K/512K L2 cache on die 8 voltage (For+1.8V, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Socket 478 CPU featuring 400MHz/533MHz system bus, CPU speed Stand-By) up to 2.4GHz or above One Fan speed for CPU Temperature sensor header x 2 (one for CPU internal use, another for Main Memory external system use) DDR DIMM x 2 Support Max Memory size up to 2GB(DDR200/DDR266) ECC support (single bit error correction/Multiple bit errors reporting) Only support unbuffered DIMM ACPI Function ( only when 3-pins Power cable connect to Backplane which connect with ATX Power Source ) BIOS Soft Power off Award System BIOS Power On by LAN Plug & Play support Power On by Keyboard Advanced Power Management support Power On by Ring Advanced configuration & Power Interface support 4M bits flash ROM Real Time Clock On chip RTC with battery back up Chipsets External Li Battery x 1 Intel 845E (MCH) Intel 82801x 1 I/O Controller Hub (ICH2) Watchdog Timer Firmware Hub (FWH) 4M bits flash ROM x1 Watchdog timeout can be programmable by Software from PCI V2.2 compliant 1, 2, 4, 8, 16, 32, 64 seconds On Board LAN PCI to ISA Bridge & ISAMAX Support Intel 82559 Ethernet controller x 2 for PEAK 712VL2 ITE 8888Fx 1 PCI to ISA Bridge Intel 82559 controller x1 +Intel 82540 controller x1 for PEAK 712VL2G Provide 64mA high driving capability to maximize ISA signals for 10 Base T/100 Base TX support, full duplex; Intel 82540 support for support ISA cards up to 20 on the backplane ISA Slot. 10 Base T/100 Base TX /(1000Base-T for PEAK 712VL2G only) Compliant with PCI V2.1/V2.2, IEEE802.3, IEEE 802.3u, IEEE802.3x, Dimensions IEEE802.3y, IEEE802.3ab 338.58mm(L) x 122mm(W) Drivers support: DOS/Windows , Windows 95/98/2000, Windows NT, Netware 5.0, Linux Power Requirements RJ45 with LED connector x 2 Voltage Maximum On Board VGA +5V 12A +12V 12A ATI M7-CSP32 VGA Controller, 1.5V AGP 4X Interface -12V 500mA 32MB VGA Memory on die Fully PC 98, PC 99, PC 2001 Compliant 15 pin CRT connector x1 Environments DVI (TMDS) box header x1 TV-out pin header x1 Support dual independent display (DVI/CRT, DVI/TV, CRT/TV) On Chip I/O(ICH2) Certification On board USB port x 2 CE approval Ultra DMA33/66/100 support, 40-pin connector x 2. Two pins power FCC Class A connector for DOM (Disk On Module) Order Information On Board I/O ITE 8712F-A Super I/O PEAK 712VL2 SIO x 2, with 2 x 16C550 UARTs, 10-pin header x 2 Full-size Socket 478 Intel Pentium 4 Processor CPU Card PIO x 1, bi-directional, EPP/ECP support, 26-pin connector x 1 w/VGA/DDR/Dual LAN (Intel 82559 + Intel 82559) Floppy Disk controller: 34-pin connector x 1 6-pin mini DIN connector x 1, for PS/2 keyboard/mouse, 5-pin PEAK 712VL2G connector x 1(for external keyboard) Full- size Socket 478 Intel Pentium 4 Processor CPU Card On Board buzzer x 1 w/VGA/DDR/Dual LAN (Intel 82559 + Intel 82540) The Digital Infrastructure All brand name and registered trademarks refered to in this datasheet are the property of their respective owners. All specifications are subject to change without notice.

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products