Industrial Trading

Description

Nexcom MAXI6560 6U MMC 2 Pentium II All-in-One CompactPCI CPU Board with Intel 82558 10/100 Base Ethernet Controller and Hot Swap Support

Part Number

MAXI6560

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

EBX

System Chipset

Intel 915GM

Video Chipset

Intel 915GM

BIOS

Award System BIOS Plug & Play support Advanced Power Management support 2M bits flash ROM

Certifications

CE approval FCC Class A

CPU

Intel® CPU module MMC2 connector x 1

Dimensions

233.35mm(L) x 160mm(W)

Ethernet

Intel® 82558 single chip Ethernet controller 10 Base T/100 Base TX support, full duplex Complied with PCI V2.1, IEEE 802.3, IEEE 802.3U Backward compatible with former 82557 Ethernet controller based net modules Drivers support: DOS/Windows®, Netware, Windows® 95/98/2000, Windows® NT4.0, SCO Open Server 5.0 RJ45 connector x 1

I/O Chipset

SMSC 37C669+37C602 Super I/O x 2 on board SIO x 4, with 2 x RS422/485 (option), 9 pin D-type x 2 (Front I/O) PIO x 1, Bi-Directional, EPP/ECP support, 20 pin micro connector x 1 (Both Front & Rear I/O) Floppy disk controller: 5.25" 360K/1.2MB, 3.5" 720K/1.2MB/1.44MB/2.88MB support On chip enhanced IDE x 2, PIO up to mode 4, DMA master up to mode 2, Ultra DMA/33 support, 40 pin x 1 (Rear I/O), total 2 E.IDE Devices support On chip keyboard, mouse controller, PS/2 keyboard, 6 pin mini DIN x 1, PS/2 mouse, 6 pin mini DIN x 1 On board USB port connector x 1(Both Front & Rear I/O) On board buzzer x 1

Memory

On board 64/128MB SDRAM (ECC support) 144 pin SO-DIMM x 1 reserved Maximum 384MB SDRAM support

Operating Temperature

Operating temperatures: 0°C to 60°C Storage temperatures: -20°C to 80°C Relative humidity: 10% to 90% (Non-condensing)

Power Consumption

+3.3V: 6A (Max.) +5V: 5A (Max.)

Processor

Intel Pentium II

RTC

High precision real time clock/calendar with battery back up

Technology

6U CompactPCI® CPU board Intel® MMC2 architecture PCI V2.1 compliant PICMG 2.0 R2.1 compliant PICMG 2.1 R1.0 Hot Swap compliant

VGA

C&T 69000 VGA controller TFT LCD/DSTN LCD/CRT control 2MB SDRAM on die Maximum Res. Color & Refresh Rate Resolution Colors Refresh Rate (Hz) 1280 x 1024 256 60 1024 x 768 16bits (High color) 85, 75, 60 800 x 600 24bits (True color) 85, 75, 60 Driver support: Windows® 95/98/2000, Windows® NT4.0 15 pin CRT connector x 1 (Front I/O & Rear I/O option), 40 pin LCD panel connector x 1 (Rear I/O)

Watchdog Timer

1, 2, 4... 64 seconds time-out intervals

Features

Adaptec 7890 Ultra 2 SCSI
C&T 69000 VGA
Hot Swap support
Intel 440BX Chipsets
Intel 82558 Ethernet
Intel Pentium II 400/Celeron 466MHz
On board 64/128MB SDRAM, Max. 384MB SDRAM (Max), SO-DIMM x 1

Datasheet

NEXCOM-MAXI 6560-datasheet.pdf

150 KiB

Download

Extracted Text

Onboard Intel® Pentium® M EBX SBC PCM-9584 with Audio, VGA/2 LVDS and LAN LCD1 Backlight con Features USB1/2 USB5/6 VGA con USB3/4 LCD2 Backlight con  Embedded Dothan CPU (2 MB L2 cache), Intel® Celeron® M 90 nm and LVDS2 con Pentium® M CD-IN2 con System FAN con CD-IN1 con  Supports 533 MHz DDR2 SODIMM LVDS1 con Audio output con  Supports Dual LCD (36-bit LVDS + 48-bit LVDS) COM 1/2/3/4  Supports two Ethernet up to 10/100/1000 Mbps Primary HDD con  Supports six USB 2.0 ports Print port con PC/104+ con GPIO con  Supports four COMs Giga LAN2 con CPU FAN con SATA con1 TV-out con SATA con2  PC/104-Plus Supported Giga LAN1 con  Extended temperature optional KB/MS con PCI slot Giga LAN LED con Power con +12 V and -5 V con Display Specifications  Chipset Intel 915GM chip integrated. (Extreme Graphics 2)  Memory Size Optimized Shared Memory Architecture, supports up to General 128 MB frame buffer using system memory  CPU Embedded Intel Pentium M (Banias/Dothan)/Celeron M  Resolution CRT Display mode: pixel resolution up to 1600 x 1200 Processor supported at 85-Hz and 2048 x 1536 at 75-Hz Pentium M 2.0 GHz PCM-9584FG-U0A1E LCD Display mode: Dual channel LVDS panel supports Pentium M 1.4 GHz PCM-9584FG-S4A1E up to UXGA panel resolution with frequency range from Celeron M 1.0 GHz PCM-9584FG-S0A1E 25 MHz to 112 MHz uFCPGA2 (478pin) PCM-9584FG-00A1E  LCD Interface 2 Channel LVDS 1 (36-bit), LVDS 2 (48-bit)  2nd Cache Memory Depends on CPU from 512KB to 2 MB  LVDS Hirose connector support up to 2 channel  System Chipset Intel 915 GM GMCH/ICH6M Chipset (1 x 48/1 x 36-bit) LVDS LCD Panel  BIOS AWARD® 512 kbit Flash BIOS  Dual Ind. Display CRT + 48-bit LVDS; CRT + TV-Out; LVDS + TV-Out  System Memory 2 x 200-pin SODIMM sockets, Double Data Rate under Windows system 36-bit LVDS (915 GM) + 48-bit (DDR2) LVDS (Chrontel) LCD Panel 128 MB to 2 GB, accept 128/256/512/1024 MB DDR2 up to 400/533 DRAM Mechanical and Environmental  Power Management APM1.2, ACPI support  Dimension (L x W) 203 x 146 mm (8" x 5.75")  SSD Supports CompactFlash® Card TYPE I/II  Weight 0.85 kg (weight of total package) (shared 2nd IDE Channel) /USB-DOM (option)  Operating Temperature 0 ~ 60° C (32 ~ 140° F)  Watchdog Timer 255-level interval timer, setup by software, Super I/O  Operating Humidity 0% ~ 90% relative humidity, non-condensing integrated, SMSC Controller  Storage Temperature -20 ~ 70° C (accessories Storage temperature:  Expansion Interface Supports PCI 104, Mini PCI interface , 1 x PCI Slot, -20 ~ 60° C) and 16-bit PC/104 ISA Connector  Storage Humidity 95% @ 60° C  Battery Lithium 3 V/196 mAH Power I/O  Power Supply Voltage +5 V ±5%, +12 V ±5%  I/O Interface 1 x EIDE (UDMA 100), 2 x SATA 150, 1 x K/B,  Power Consumption (Pentium M with 1.4 GHz) 1 x Mouse, 3 x RS232, 1 x RS232/422/485, 1 x LPT Max (HCT): 2.42 A @ 5 V, 1.01 A @ 12 V Suspend: 1.86 A @ 5 V, 0.48 A @ 12 V  USB 6 x USB 2.0 compliant Ports (Pentium M with 2.0 GHz)  Audio AC97 Audio codec ALC 650 Max (HCT): 2.43 A @ 5 V, 1.65 A @ 12 V Supports Speaker out, CD-input, Line-in, Line-out, Suspend: 1.87 A @ 5 V, 0.75 A @ 12 V Microphone  IrDA - Packing List  GPIO 8-bit general purpose 4 input/4 output  1 x PCM-9584 SBC Ethernet  1 x Mini Jumper Pack (p/n:9689000002)  Chipset 2 x BroadCOM BCM5721  1 x Startup Manual  Speed 10/100/1000 Mbps  1 x Utility CD  Interface 1 x RJ45 by cable  1 x ATX Power Cable (p/n:1700001112)  Standard IEEE 802.3u 100Base-T & IEEE 802.3ab 1000Base-T Stackable SBCs All product specifications are subject to change without notice Last updated : 7-Feb-2007 PCM-9584 Board Diagram Board Diagram Intel PentiumM processor LVDS1Connector DDR2 LVDS2Connector CH7308 915GM SODIMM VGAConnector MiniPCI Connector LPT LAN LAN chip Connector Super COM 6USB2.0 3/4 I/O KB/ Audio Mouse PCISlot IDE ICH6M CF PCI-104connector SATA COM1/2 PCIto ISA PC/104Connector bridge Ordering Information L2 SDRAM Giga USB RS- RS-232/ USB- KB/ PCI Mini Thermal Operation Part No. CPU Chipset CRT LVDS1 LVDS2 10/100 Audio LPT FDD CF Cache DIMM LAN 2.0 232 422/485 DOM MS Slot PCI Solution Temp. PCM-9584FG-00A1E Socket 479 -- 915 GM 2 Yes 36-bit 48-bit -- 2 Yes 6 3 1 Yes -- Yes Yes Yes 1 1 Active 0 ~ 60° C Celeron M 512 PCM-9584FG-S0A1E 915 GM 2 Yes 36-bit 48-bit -- 2 Yes 6 3 1 Yes -- Yes Yes Yes 1 1 Passive 0 ~ 60° C 1.0 GHz KB Pentium M PCM-9584FG-S4A1E 2 MB 915 GM 2 Yes 36-bit 48-bit -- 2 Yes 6 3 1 Yes -- Yes Yes Yes 1 1 Passive 0 ~ 60° C 1.4 GHz Pentium M PCM-9584FG-U0A1E 2 MB 915 GM 2 Yes 36-bit 48-bit -- 2 Yes 6 3 1 Yes -- Yes Yes Yes 1 1 Active 0 ~ 60° C 2.0 GHz Pentium M PCM-9584Z-S4A1E 2 MB 915 GM 2 Yes 36-bit 48-bit -- 2 Yes 6 3 1 Yes -- Yes Yes Yes 1 1 Passive -20 ~ 80° C 1.4 GHz Optional Accessories  PCM-10586-9584E Wiring kit for PCM-9584  1703100260 USB cable (26 cm)  1703100121 USB cable (12 cm)  PCM-110-00A3E 1-slot PCI riser card for 5.25” biscuits  PCM-120-00A3E 2-slot PCI riser card for 5.25” biscuits  PCM-200-00A2E PCI-104 to PCI bus module  MIO-3110-00A1E Mini PCI to USB interface connection hub  MIO-3120-00A1E Mini PCI interface to Wireless 802.11 b/g communication module  MIO-3121-00A1E Mini PCI to 4 COM Module  MIO-3140-00A1E Mini PCI interface to SATA storage module  MIO-3150-00A1E Mini PCI interface to video capture module Online Download www.advantech.com/products PCIBus

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products