5.25" VIA/ Eden™/ C7 Embedded CPU Board with EBC 580 Dual independent LVDS/ Gigabit LAN VIA CN700 LVDS1 LVDS2 CCFL PCI VIA 8237R+ CF COM Port CD-In Line-In Microphone in Speaker out VGA Parallel Port GbE x 2 DIMM USB USB2.0 Connector PS/2 connector Supports VIA Eden and C7 Power Input Standby 44-pin SATA Power select Processors Connector IDE Main Features Œ VIA Eden™/C7 with V4 Bus Processors On-board Œ Supports Dual LVDS Independent Display Œ VIA CN700 and 8237 R+ Chipsets Œ CompactFlash Socket Œ 1 x 184-pin DDR DIMM Socket Supports Un-buffered Non-ECC DDR 333/400 up to 1 GB Œ 2 x Realtek RTL8110SC Gigabit Ethernet Controller Product Overview The 5.25" EBC 580 embedded board computer is Based on VIA’s new generation of embedded CPUs featuring Eden™ (low power) and C7 (high performance) that all use the new V4 Bus (@400 MHz). The EBC 580 incorporates a VIA CN700 and 8327R+ chipset. The VIA CN700 supports un-buffered non-ECC DDR 333/400 memory up to 1 GB and offers a powerful integrated graphics engine. The South Bridge 8327 R+ chipset provides a standard 32-bit/33 MHz PCI slot, parallel port, 44-pin IDE connector, SATA connector, CompactFlash socket, and numerous other I/O ports such as four serial ports, four USB 2.0 ports, two Gigabit Ethernet LAN ports, an audio interface, as well as others. The RoHS compliant EBC 580 is the successor of EBC 569, keeping the same mechanical dimensions to share the same chassis with EBC 569 board. The EBC 580 has many enhancement compared to the EBC 569, include improving CPU performance up to 40 ~ 50%, utilizing DDR memory, support USB 2.0 and SATA storage, integrated dual Gigabit Ethernet, and supports AT & ATX power supplies. Additionally, the new EBC 580 supports a wide range of LVDS panels ranging from 18-bit to 48-bit panels and dual independent LVDS. Specifi cations CPU Support Œ Supports Wake on LAN (When 5 Vsb power available). (LAN1 is available for Wake up, LAN2 is not available for Wake up) Œ VIA Eden™ V4 1 GHz Œ VIA C7-D 1.5 GHz Audio Œ VIA, VT1616 CODEC for AC97 V 2.0 Main Memory Œ MIC-in, Speaker-out, CD-in, Line-in Œ 1 x 184-pin DIMM Socket for up to 1 GB un-buffered non-ECC DDR 333/400 memory Display Œ LVDS1: VIA VT1636 transmitter, 2 x DF13-20 DP, 20-pin connector for LVDS1 Chipset ® ® panel output Œ VIA CN700 / VIA 8237R+ Œ LVDS2: VIA VT1636 transmitter, 2 x DF13-20 DP, 20-pin connector for LVDS2 panel output BIOS Œ CCFL: 2 x CCFL for LCD panel backlight inverter power Œ Award System BIOS Œ VGA: 1 x DB15 VGA connector Œ Supports Power On after power fail as a BIOS option Œ Supports Wake on LAN I/O Interface Œ 4 Mbit fl ash ROM Œ Serial port: 4 ports, with 1x 40 pin header, COM 2 for RS 232/422/485 Œ USB 2.0 x 4 On-board LAN Œ Parallel port: 1 port, with 2x13 box header (2.0 mm) Œ 2 x 10/100/1000 network connection Realtek RTL8110SC Œ PS/2: 1 x Mini-Din for Keyboard/Mouse Œ Each LAN port reserved with 2-pin header for extended LAN LED (Active, Link Œ Digital I/O: 2x4 pin header (2.54 mm) 100, and 1000 LAN LED) 5.25” CPU Boards Block Diagram VIA Eden / C7 with V4bus Processors FSB800 6.4GB/Sec 2.1GB/S DDR400/333 VGA Port 3.2GB/Sec North Bridge 2.6GB/Sec DDR CN700 Slot FPD VT1636 LVDS1 VT1636 VLINK LVDS2 533MB/Sec 2 x SATA 150MB/S 60MB/S 6 x USB2.0 IDE CF 100MB/S South Bridge (Secondary) (Primary) VT8237R+ AC＇97 LPC IrD Super IO VT1616 PCI BUS 133MB/Sec Parallel COM1 COM2 COM3 COM4 LAN1 LAN2 PCI Keyboard Port RTL8110SC RTL8110SC Slot Mouse RS422 RS485 Œ IrDA: on-board pin header for IrDA Tx/Rx NOTE: Full Loading: Utilize CPU 100% with Burn-in test running Œ SMBus 2.0 controller Light Loading: Utilize CPU loading below 5% without application running Œ On-board header for reset SW and HD active LED Œ I2C: On-board 3-pin header for I2C, one pin for GND ATX Mode Watchdog Timer Œ Power required: +12 V/+5 V/+5 Vsb Œ Supports Power On push Button, Software Shutdown function and LAN1 remote Œ Watchdog timeout is programmable by software from 1 second to 64 seconds wake up only On-board RTC Œ 2-pin Header for Power On Push Button Œ On-chip RTC with battery back up AT Mode Œ 1 x External Lithium battery Œ Power Required: +5 V/+12 V Storage Œ No Power On push Button, No Software Shutdown function and No LAN1 remote wake up Œ HDD: 1 x 44-pin connector (secdonary) Œ 1 x internal CF socket Dimensions Œ 5.25" form factor System Monitor 203 mm (L) x 146 mm (W) (7.9" x 5.7") Œ Derived from Super I/O to support system monitor Œ Monitoring of 5 voltages, 3 temperatures and 2 fan speeds. Environment Œ 5 voltage (For +3.3 V, +5 V, +12 V, Vcore and +2.5 V) Œ Board level operating temperature: 0°C to 60°C Œ 3 temperature (For CPU and two external for system) Œ Storage temperature: -20°C to 80°C Œ 2 fan speed ( one for CPU and one for systems) Œ Relative humidity: 10% to 90% (Non-condensing) Power Input Certifications Œ 3-pin header for AT/ATX mode switch Œ CE approval Œ +3.3 V is converted from +5 V Œ FCC Class A Œ 6-pin power input connector Œ 3-pin Jst connector to receive the 5 Vsb input from power source Ordering Information Œ Factory default setting is AT Mode Œ EBC 580-715 (P/N: 10E00058001X0) Power Consumption: Low Power Embedded Board with VIA C7-D CPU 1.5 GHz w/ VGA/ Dual LVDS/ Audio/4 COM/4 USB 2.0 /Dual Gigabit LAN CPU : VIA C7-D 1.5GHz/400MHz +12 V +5 V Œ EBC 580-E10 (P/N: 10E00058002X0) Memory : 1 x DDR 1GB Low Power Embedded Board with VIA Eden™ V4 Bus CPU 1 GHz w/ VGA/ Dual Full-Loading Mode 1.28 A 4.17 A LVDS/ Audio/ 4 COMs/ 4 USB 2.0 /Dual Gigabit LAN Light-Loading Mode 0.36 A 1.71 A 5.25” CPU Boards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008