® ® 3.5" On-board Intel Celeron M 600 MHz CPU EBC 300 or socket P-M/ C-M CPU with GBe LAN Mic-In and Speaker Out VGA LAN COM 2 x USB Pentium M/Celeron M PCI104 852GM ICH-4 POWER IDE Onboard DDR 256MB USB x 4 Main Features ® ® Œ On-board Intel Celeron M 600 MHz Processor with 512 KB L2 Œ Audio with Speaker-out, Line-in and Mic-in Cache Œ Supports LVDS/ 6 x USB 2.0 ® Œ Intel 852GM and ICH4 Chipset Œ On-board 256 MB DDR Memory Œ Realtek RTL 8110SC Gigabit Ethernet Controller Product Overview ® ® The EBC 300 is a 3.5" embedded board with an on-board Intel Celeron M 600 MHz processor with 512 KB L2 cache or socket Pentium M/celeron M with 400 MHz FSB ® The EBC 300 features Intel 852GM and ICH4 chipsets, which supports DDR 200/266 memory, along with integrated graphics with 64 MB shared memory to support CRT and LVDS function. The South Bridge ICH4 provides a 44-pin IDE connector, CompactFlash socket, two serial ports, six USB 2.0 ports, one Gigabit Ethernet LAN port, and an audio interface. The EBC 300 is a great solution featuring a low power consumption processor with versatile display and numerous I/O port support. On-board LAN Specifi cations Œ Realtek RTL 8110SC Gigabit Ethernet Controller Œ 1 x RJ45 with LED CPU Support Œ Supports PXE LAN boot ROM for Ethernet Boot up ® ® Œ Supports Intel Celeron M 600 MHz processor with 512 KB L2 cache and 400 Œ Supports Wake on LAN (When 5 Vsb power available) MHz FSB ® ® ® ® Œ Support for Intel Pentium M processor or Intel Celeron M processor in Display 478-pin, Micro-FCPGA package (mPGA479M Socket) ® Œ Intel 852GM integrated graphics solution w/ Intel Extreme Graphics 2 technology Main Memory Œ Up to 64 MB of dynamic video memory allocation Œ On-board 256 MB Non-ECC DDR SDRAM memory Œ 350 MHz integrated 24-bit RAMDAC that can drive a standard progressive scan Chipset analog monitor with pixel resolutions up to 1600 x 1200 at 85 Hz, 2048 x 536 ® at 75 Hz Œ Intel 852GM 400 MHz ® Œ 1 x DB15 VGA connector Œ Intel ICH4 Œ LVDS: LFP (local fl at panel) LVDS interface/Single pixel LVDS panel support up to UXGA panel resolution (1600 x 1200) / DF13-20DP, 2 x 20-pin connector for BIOS LVDS panel output Œ Award system BIOS Œ ACPI: Only supports Software Shutdown by 5 Vsb Provided (S0 /S5 only) I/O Interface Œ Advanced Power Management support Œ Serial port: 1 port, with 16 C550 UARTs, 1 x DB-9 Connector Œ 4 Mbit fl ash ROM Œ USB 2.0: 6 ports, with two direct output, four from 1x6 JST Œ Supports Pentium M Speed Step (Customized by Nexcom) Œ On-board 3-pin header for I2C, one pin for GND Œ Supports Automatic Power On Function Œ On-board 2-pin header for Reset switch 3.5” CPU Boards Block Diagram Intel® Pentium® M / Celeron® M processor FSB 400MHz RGB Signal CRT OUTPUT DDR 266 MHz Intel DDR 82852GM (On board) 18bit or 24 bit LVDS OUT DMI AC'97 CF IDE CODEC PATA (Primary) (Secondary) AC'97 Intel PCI 32Bit 33MHz USB2.0 6 x USB 82801DB ICH4 LPC 33MHz LAN PCI104 RTL8110SC RTL8110SB IT8712 SIO FWH RJ45 CON 1 x SIO Œ 8 GPIO lines via header (GPI 0 ~ 3 and GPO0 ~ 3) TTL Level (0/5 V) Environment Œ On-board Power LED and HDD Active LED Pin Header Œ Operating temperatures: 0°C to 60°C Œ Reserved 1 x 3-pin fan connector (for CPU) Œ Storage temperatures: -20°C to 85°C Œ 1 x PCI 104 connector Œ Relative humidity: Operating 10% to 90%, non-condensing; Non-operating 5% to 95%, non-condensing On-board RTC Certifications Œ On-chip RTC with battery back up Œ 1 x External Li-Ion battery Œ CE approval Œ The battery socket is in flat direction. Œ FCC Class A Œ Tolerance less than 2 sec ( 24 hours ) under 25°C environment Ordering Information Storage Œ EBC 300-C65-256M (P/N: 10E00030004X0) RoHS Compliant Œ CF: 1x Internal CompactFlash socket ® Low Power Embedded Board with Celeron M 600 MHz 512 KB L2 on-board Œ Support One Type I& II Compact Flash Card (Primary Master) with VGA/ LVDS/ Audio/ COM/ USB 2.0 / Gigabit LAN Œ IDE: 1 x 44-pin IDE connector Œ EBC 300-SKT-256M (P/N: 10E00030003XO) RoHS Compliant ® ® System Monitor Low Power Embedded Board with Pentium M / Celeron M CPU Socket with VGA/ LVDS/ Audio/ COM/ USB 2.0 / Gigabit LAN Œ Derived from Super I/O to support system voltage, fan speed, temperature monitoring Power Input Œ Supports both AT and ATX Mode (Factory default setting is AT mode) CPU: P-M 1.7 G +12 V +5 V Memory: On board DDR 256 MB Full-Loading Mode (A) 0.2 A 6.2 A Light loading Mode (A) 0.2 A 2.5 A NOTE: 1. Full Loading: Utilize CPU 100% with Burn-in test running 2. Light Loading: Utilize CPU loading below 5% without data or application running. Dimensions Œ 3.5" form factor 146 mm (L) x 105 mm (W) (5.7" x 4.1") 3.5” CPU Boards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008