MODEL: M6SXT (Configurator software is used to change the input type and Tension-Clamp Ultra-Slim Signal Conditioners M6S Series precise range.) THERMOCOUPLE TRANSMITTER [2] OUTPUT (PC programmable) Current Functions & Features Z1: Range 0 – 20 mA DC • Maintenance-free tension clamp connection Voltage • 5.9-mm wide ultra-slim design V2: Range -10 – +10 V DC • Low profile allows the M6S module mounted in a 120-mm V3: Range -5 – +5 V DC deep panel (Configurator software is used to change output over the • Accepts a thermocouple input and provides an isolated, described range of the selected suffix code. linearized DC signal For changing between suffix codes, set the Output Range • Cold junction compensation, linearization and burnout Selector on the side of unit before software adjustment.) protection • PC programmable • High-density mounting POWER INPUT • Power indicator LED DC Power • UL approval R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) 5.9 (.23) [3] OPTIONS STANDARDS & APPROVALS blank: CE marking 94 (3.70) /UL: UL approval (CE marking) RELATED PRODUCTS 102 • PC configurator software (model: M6CFG) (4.02) Downloadable at M-System’s web site. mm (inch) A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable MODEL: M6SXT–[1][2]–R[3] cable types. ORDERING INFORMATION GENERAL SPECIFICATIONS • Code number: M6SXT-[1][2]-R[3] Connection Specify a code from below for each [1] through [3]. Input and output: Tension clamp (e.g. M6SXT-2Z1-R/UL) Power input: Via the Installation Base (model: M6SBS) • Temperature range (e.g. 0 – 1000°C) or Tension clamp • Output range (e.g. 4 – 20 mA DC) Applicable wire size: 0.2 to 2.5 mm2, stripped length 8 mm Housing material: Flame-resistant resin (black) Isolation: Input to output to power [1] INPUT THERMOCOUPLE Overrange output: -2 – +102 % 1: (PR) (Negative current output is not available.) 2: K (CA) Zero adjustment: -2 to +2% (PC programming) 3: E (CRC) Span adjustment: 98 to 102% (PC programming) 4: J (IC) Burnout: Upscale standard; downscale or no burnout 5: T (CC) optional by programming 6: B (RH) Linearization: Standard 7: R Cold Junction Compensation: CJC sensor incorporated 8: S Power LED: Green light turns on when the power is supplied. N: N Status indicator LED: Orange LED; Flashing patterns 0: Specify (Please provide a emf table.) http://www.m-system.co.jp/ M6SXT SPECIFICATIONS ES-7981 Rev.4 Page 1/4 MODEL: M6SXT indicate different operating status of the transmitter. V3: 1 – 5 V DC Programming: Downloaded from PC; input type and range, output type and range, zero and span, burnout type, user’s INSTALLATION linearization table, etc. Power consumption: Approx. 0.5 W For detailed information, refer to the users manual for the Operating temperature: -20 to +55°C (-4 to +131°F) PC configurator. Operating humidity: 30 to 90 %RH (non-condensing) Configurator connection: 2.5 dia. miniature jack; Mounting: Installation Base (model: M6SBS) or DIN rail RS-232C level Weight: 65 g (2.3 oz) INPUT SPECIFICATIONS PERFORMANCE Input resistance: 1 MΩ min. Overall accuracy: Input accuracy + output accuracy Burnout sensing: ≤ 0.2 μA • Input accuracy: Accuracy (Table 1) + Cold Junction Temperature range: See Table 1. Compensation Error 3°C (5.4°F) If not specified, the input range is shown below. • Output accuracy: Max. Output Range / Span × ±0.04% 1 PR: 0 – 1600°C Cold junction compensation error: 2 K: 0 – 1000°C ±3°C at 25 ±10°C 3 E: 0 – 500°C ±5.4°F at 77 ±18°F 4 J: 0 – 500°C Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span 5 T: 0 – 300°C Response time: ≤ 0.5 sec. (0 – 90 %) 6 B: 500 – 1600°C Burnout response: ≤ 10 sec. 7 R: 500 – 1600°C Line voltage effect: ±0.1 % over voltage range 8 S: 0 – 1600°C Insulation resistance: ≥ 100 MΩ with 500 V DC N N: 0 – 1000°C Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) OUTPUT SPECIFICATIONS • DC CURRENT CALCULATION EXAMPLES OF OVERALL ACCURACY Output range: 0 – 20 mA DC [Example] K thermocouple, 0 – 1000°C, 4 – 20 mA DC Conformance range: 0 – 20.4 mA DC output Minimum span: 1 mA Absolute value accuracy (Table 1): 0.25°C Offset: Lower range can be any specific value within the CJC error (3°C) added: 3.25°C output range provided that the minimum span is • Input accuracy = 3.25°C / 1000°C × 100 = 0.325 % maintained. Output span: 16 mA (20 – 4) Load resistance: Output drive 11 V max. • Output accuracy = 20 mA / 16 mA × 0.04 = 0.05 % (e.g. 4 – 20 mA: 550 Ω [11 V/20 mA]) Overall accucracy including CJC error = 0.325 + 0.05 = If not specified, the output range is 4 – 20 mA DC. ±0.38 % of span • DC VOLTAGE Code V2 (wide spans) Output range: -10 – +10 V DC Conformance range: -10.4 – +10.4 V DC Minimum span: 1 V Code V3 (narrow spans) Output range: -5 – +5 V DC Conformance range: -5.2 – +5.2 V DC Minimum span: 0.5 V Offset: Lower range can be any specific value within the output range provided that the minimum span is maintained. Load resistance: Output drive 1 mA max. (e.g. 1 – 5 V: 5000 Ω [5 V/1 mA]) If not specified, the output range is shown below. V2: 0 – 10 V DC http://www.m-system.co.jp/ M6SXT SPECIFICATIONS ES-7981 Rev.4 Page 2/4 MODEL: M6SXT Table 1. C THERMOCOUPLE MIN. MAXIMUM CONFORMANCE ACCURACY SPAN RANGE RANGE (PR) 20 0 to 1760 0 to 1760 ±1.00 K (CA) 20 -270 to +1370 -150 to +1370 ±0.25 E (CRC) 20 -270 to +1000 -170 to +1000 ±0.20 J (IC) 20 -210 to +1200 -180 to +1200 ±0.25 T (CC) 20 -270 to +400 -170 to +400 ±0.25 B (RH) 20 100 to 1820 400 to 1760 ±0.75 R 20 -50 to +1760 200 to 1760 ±0.50 S 20 -50 to +1760 0 to 1760 ±0.50 N 20 -270 to +1300 -130 to +1300 ±0.30 F THERMOCOUPLE MIN. MAXIMUM CONFORMANCE ACCURACY SPAN RANGE RANGE (PR) 36 32 to 3200 32 to 3200 ±1.80 K (CA) 36 -454 to +2498 -238 to +2498 ±0.45 E (CRC) 36 -454 to +1832 -274 to +1832 ±0.36 J (IC) 36 -346 to +2192 -292 to +2192 ±0.45 T (CC) 36 -454 to +752 -274 to +752 ±0.45 36 212 to 3308 752 to 3200 ±1.35 B (RH) R 36 -58 to +3200 392 to 3200 ±0.90 S 36 -58 to +3200 32 to 3200 ±0.90 N 36 -454 to +2372 -202 to +2372 ±0.54 STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW � FRONT VIEW (with the cover open) � SIDE VIEW 5 6 7 8 Power LED Output Range Selectors Status Indicator LED Configurator Jack 1 2 3 4 http://www.m-system.co.jp/ M6SXT SPECIFICATIONS ES-7981 Rev.4 Page 3/4 SW1 SW1 ON OFF 1 2 3 4 5 6 7 8 MODEL: M6SXT The DIP switch setting is required to select output types before setting a precise output range using PC Configurator Software (model: M6CFG). Refer to the instruction manual for detailed procedures. DIMENSIONS unit: mm (inch) SCREWDRIVER * INSERTION ANGLE : approx. 35° WIRE INSERTION ANGLE TEST PROBE : approx.35° max. 2 (.08) dia. 5 6 7 8 DIN RAIL HOOK DIN RAIL 35mm wide 1 2 3 4 SCREWDRIVER [0.5 (.02)] INSERTION ANGLE : approx. 40° 5.9 (.23) 102 (4.02) • When mounting, no extra space is needed between units. *Use a minus screwdriver: tip width 3.8 mm max., tip thickness 0.5 to 0.6 mm SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM CJC SENSOR STATUS LED comp. leadwire DIP SW Isolation T/C + Digital Output + 1 5 + Low Drift Computation Driver OUTPUT Amplifier – 2 6 – – POWER LED 3 + 7 POWER 4 – 8 CONFIGURATOR JACK POWER Specifications are subject to change without notice. http://www.m-system.co.jp/ M6SXT SPECIFICATIONS ES-7981 Rev.4 Page 4/4 94 (3.70) CONNECTOR