Industrial Trading

Description

M-Systems 20VS1A Hybrid Isolation Amplifiers 20 Series; Isolation Amplifier (High Speed Response, 3-Port Isolation)

Part Number

20VS1A

Price

Request Quote

Manufacturer

M-SYSTEMS

Lead Time

Request Quote

Category

Signal Conditioning

Specifications

CMRR

Greater than or equal to 120 dB (500 V AC 50/60 Hz)

Construction

Hybrid IC

Conversion gain

×1 ±1.5 %

DC Power input

Rating ±5 %; approx. 50 mA with no load

Dielectric strength

3000 V AC @1 minute (input or reference voltage source for input to output or reference voltage source for output to power)

Frequency characteristics

Approx. 20 kHz, -3 dB

Gain adjustable range

Ã— 1 to Ã— 100

Housing material

Flame-resistant resin (black)

Insulation resistance

Greater than or equal to 100 M Omega with 500 V DC

Isolation

Input to output to power

Line voltage effect

±0.01 % over voltage range

Linearity

±0.025 % (20VS1A-4W4WA); ±0.012 % (20VS1A-4W4WB); ±0.008 % (20VS1A-4W4WC)

Mounting

Soldering to the printed wiring board

Operating humidity

30 to 90 %RH (non-condensing)

Operating temperature

-25 to +85°C (-13 to +185°F)

Response time

Less than or equal to 50 µsec. (0 – 90 %)

Temp. coefficient

±25 ppm/°C (0° - 70°; 32 - 158°F); ±50 ppm/°C (-25°- +85°; -13 - +185°F)

Unless otherwise specified, G - 1

Performance

Weight

20 g (0.71 oz)

Features

Being used for printed wiring board installation
High speed response 50 µsec.
High-linearity
Isolating between input, output and power
Isolation between input, output and power supply up to 3000 V AC
Power 15 V DC

Datasheet

20VS1A-180822494.pdf

145 KiB

Download

Extracted Text

MODEL: 20VS1A Isolation: Input to output to power Hybrid IC Isolation Amplifiers 20 Series INPUT SPECIFICATIONS ISOLATION AMPLIFIER ■ DC Voltage (high speed response, 3-port isolation) Input : -10 – +10 V DC Functions & Features Input resistance: 1 MΩ (10 kΩ in power failure) • Being used for printed wiring board installation Overload input voltage: ±15 V DC continuous • High-linearity Input offset voltage: ±2 mV @ G = 1 • High speed response 50 μsec. Input bias current: 25 pA TYP. (@25°C) • Isolating between input, output and power • Isolation between input, output and power supply up to 3000 V AC OUTPUT SPECIFICATIONS • Power 15 V DC ■ DC Voltage: -10 – +10 V DC Load resistance: ≥ 2 kΩ Typical Applications Output impedance: ≤ 1 Ω • Isolating the field and input circuit of microprocessor to reduce noise from field REFERENCE VOLTAGE SOURCE • Available for manufacturers of small-lot products ■ FOR INPUT to omit the development of isolation circuit Output voltage: ±16.5 V DC ±2.5 V (when power supply is 15 V DC) Load current: ≤ 2 mA ■ FOR OUTPUT Output voltage: ±16.5 V DC ±2.5 V (when power supply is 15 V DC) Load current: ≤ 2 mA INSTALLATION MODEL: 20VS1A–4W4W[1]–U Power input •DC: Rating ±5 %; approx. 50 mA with no load ORDERING INFORMATION Operating temperature: -25 to +85°C (-13 to +185°F) • Code number: 20VS1A-4W4W[1]-U Operating humidity: 30 to 90 %RH (non-condensing) Specify a code from below for [1] Mounting: Soldering to the printed wiring board (e.g. 20VS1A-4W4WA-U) Weight: 20 g (0.71 oz) INPUT / OUTPUT PERFORMANCE in percentage of span 4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.) Unless otherwise specified, G = 1. / -10 - +10 V DC (Load resistance 2 kΩ min.) Linearity: ±0.025 % (20VS1A-4W4WA) ±0.012 % (20VS1A-4W4WB) [1] LINEARITY ±0.008 % (20VS1A-4W4WC) A: ±0.025 % Temp. coefficient: B: ±0.012 % ±25 ppm/°C (0℃ - 70℃; 32 - 158°F) C: ±0.008 % ±50 ppm/°C (-25℃ - +85℃; -13 - +185°F) Frequency characteristics: Approx. 20 kHz, -3 dB POWER INPUT Response time: ≤ 50 μsec. (0 – 90 %) DC Power Conversion gain: ×1 ±1.5 % U: 15 V DC Gain adjustable range: × 1 to × 100 Line voltage effect: ±0.01 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC GENERAL SPECIFICATIONS Dielectric strength: 3000 V AC @1 minute (input or Construction: Hybrid IC reference voltage source for input to output or reference Housing material: Flame-resistant resin (black) http://www.m-system.co.jp/ 20VS1A SPECIFICATIONS ES-4421 Rev.0 Page 1/5 MODEL: 20VS1A voltage source for output to power) CMRR: ≥ 120 dB (500 V AC 50/60 Hz) EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 4.5 11.3 26 (1.02) (.18) (.44) PIN ASSIGNMENTS 1 OUTPUT (+) 1 2 OUTPUT COM (–) 3 REF. VOLT. SOURCE for OUTPUT (+) 4 REF. VOLT. SOURCE for OUTPUT (–) 8 POWER SUPPLY (+) 9 POWER SUPPLY (–) 13 REF. VOLT. SOURCE for INPUT(+) 14 REF. VOLT. SOURCE for INPUT (–) 15 FEEDBACK 16 INVERTING INPUT 17 INPUT COM (–) 18 NON-INVERTING INPUT 0.45 dia. (BOTTOM VIEW) (.02) SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM FEEDBACK 15 INVERTING INPUT 16 Isolation Output NON-INVERTING INPUT + 18 Amplifier 1 INPUT VIN Driver OUTPUT – (–) COM (–) 17 2 COM + 13 3 + REFERENCE Volt. SOURCE for INPUT REFERENCE Volt. SOURCE for OUTPUT – 14 4 – + 8 POWER SUPPLY – 9 Note. The reference voltage source for input is common to the input COM (–) The reference voltage source for output is common to the output COM (–) http://www.m-system.co.jp/ 20VS1A SPECIFICATIONS ES-4421 Rev.0 Page 2/5 53.3 (2.1) 2.54 (.1) 1.23 2.54 2.54 (.1) (.05) (.1) 10.16 (.4) 12.7(.5) 22.86 (.9) 7.62 (.3) 22 (.87) MODEL: 20VS1A APPLICATION EXAMPLE 10 kΩ ≤ (R1 + R2) ≤ 200 kΩ ■ n Non-inverting amplifier circuit: Basic example of G = 1 15 – + 16 – 1 + + OUTPUT Vo + 18 INPUT VIN – – 17 2 + + 13 3 REF. Volt. SOURCE for INPUT REF. Volt. SOURCE for OUTPUT POWER – – 14 4 8 9 + – 15V DC Non-inverting circuit G = 1 ■ n Inverting amplifier circuit: Basic example of G = -1 (output inverted to the input) R1 R1 + 15 – + 16 – 1 + INPUT VIN + 18 OUTPUT Vo – – 17 2 + + 13 3 REF. Volt. SOURCE for INPUT REF. Volt. SOURCE for OUTPUT POWER – – 14 4 8 9 + – 15V DC Inverting circuit G = -1 ■ n Non-inverting amplifier circuit: Example of G = 1 + R1 / R2 R2 R1 15 – + 16 – 1 + + + OUTPUT VO 18 INPUT VIN – – 17 2 + + 13 3 REF. Volt. SOURCE for INPUT REF. Volt. SOURCE for OUTPUT POWER – – 14 4 8 9 + – 15V DC Non-inverting amplifier circuit G = 1 + R1 / R2 http://www.m-system.co.jp/ 20VS1A SPECIFICATIONS ES-4421 Rev.0 Page 3/5 MODEL: 20VS1A ■ n Inverting amplifier circuit: Example of G = -R1 / R2 (output inverted to the input) R2 R1 15 + – 16 + 1 – + INPUT VIN 18 + OUTPUT VO 17 – – 2 + 13 + 3 REF. Volt. SOURCE for INPUT REF. Volt. SOURCE for OUTPUT POWER – 14 – 4 8 9 + – 15V DC Inverting amplifier circuit G = -R1 / R2 ■ n Non-inverting amplifier circuit with external adjustments: Example of G = 2 10kΩ (SPAN) 10kΩ 9kΩ 15 2kΩ – + 16 – 1 + + + 18 OUTPUT VO INPUT VIN – 17 2 50kΩ (ZERO) 200Ω + + 13 REF. Volt. 3 REF. Volt. SOURCE for OUTPUT SOURCE – POWER – – – for INPUT 14 4 30kΩ 8 9 – + 15V DC Non-inverting amplifier circuit zero/span adjustments ■ n Inverting amplifier's circuit with external adjustments: Example of G = -1 (output inverted to the input) 10kΩ (SPAN) 10kΩ 9kΩ + 15 2kΩ – 16 + 1 – + INPUT VIN + 18 OUTPUT VO – 17 – – 2 100kΩ (ZERO) 200Ω 13 + REF. Volt. + 3 SOURCE REF. Volt. SOURCE for OUTPUT POWER for INPUT 14 – – 4 30kΩ 8 9 + – 15V DC Inverting amplifier circuit zero/span adjustments http://www.m-system.co.jp/ 20VS1A SPECIFICATIONS ES-4421 Rev.0 Page 4/5 MODEL: 20VS1A ■ Non-inverting amplifier circuit: With noise filter +Vos 15 – – + 16 1 – + + + –Vos 18 INPUT VIN – 17 2 + 13 3 +Vos REF. Volt. SOURCE REF. Volt. SOURCE for INPUT for OUTPUT POWER – 4 –Vos 14 8 9 + – 15V DC Specifications are subject to change without notice. http://www.m-system.co.jp/ 20VS1A SPECIFICATIONS ES-4421 Rev.0 Page 5/5

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products