Manufacturers
M-SYSTEMS M6NYV
Description
M-Systems M6NYV Screw Terminal Ultra-Slim Signal Conditioner; M6N Series; Isolator
Part Number
M6NYV
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
(Output code 4W
Adjustable at 0 V.)
Accuracy
±0.1 %
Dielectric strength
2000 V AC @1 minute (input to output to power to ground)
Housing material
Flame-resistant resin (black)
Input and output
M3 screw terminal (torque 0.5 N•m)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
Installation Base (model- M6NBS) or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-20 to +55°C (-4 to +131°F)
Power Consumption AC Power input
Max. 2 VA
Power Consumption DC power input
Approx. 0.45 W
Power input
Via the Installation Base (model- M6NBS) (not available for AC power input) or M3 screw terminal (torque 0.5N•m)
Power LED
Green light turns on when the power is supplied
Recommended solder-less terminal
Max. 5.8 mm (0.23”) wide; Ones with insulation sleeve do not fit.
Span adjustment
98 to 102 % (front)
Temp. coefficient
±0.01 %/°C (±0.006 %/°F)
Weight
60 g (2.1 oz)
Zero adjustment
-2 to +2% (front)
Features
- 2000V AC isolation
- 7.5-mm wide ultra-slim design
- Fixed range or PC programmable models selectable. User-friendly versatile programming features provided.
- Front power LED provided
- Galvanically isolates process instrumentation signals
- High-density mounting
- Low power consumption
- Low profile allows the M6N module mounted in a 120-mm deep panel
- Optional fast response: Approx. 3.5 msec, voltage output (M6xYV)
- Output load resistance 550O (at 4-20mA DC)
- Power indicator LED
- Selectable connection method – Tension-Clamp, Screw terminal or Euro terminal.
- Status LED for PC programmable models.
- UL approval
Datasheet
Extracted Text
MODEL: M6NYV (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Screw Terminal Ultra-Slim Signal Conditioners M6N Series [4] OPTIONS (multiple selections) ISOLATOR RESPONSE TIME (0 – 90 %) Functions & Features blank: Standard (≤ 0.5 sec.) • 7.5-mm wide ultra-slim design /K: Fast Response (Approx. 3.5 msec. voltage output; • Low profile allows the M6N module mounted in a 120-mm Approx. 25 msec. current output) deep panel STANDARDS & APPROVALS • Galvanically isolates process instrumentation signals blank: CE marking • High-density mounting /UL: UL approval (CE marking) • Power indicator LED • UL approval GENERAL SPECIFICATIONS 7.5 (.30) Connection Input and output: M3 screw terminal (torque 0.5 N·m) Power input: Via the Installation Base (model: M6NBS) (not available for AC power input) 102 (4.02) or M3 screw terminal (torque 0.5 N·m) Recommended solderless terminal: Max. 5.8 mm (0.23”) wide; Ones with insulation sleeve do not fit. Applicable wire size 0.2 – 2.5 mm2 102 Housing material: Flame-resistant resin (black) (4.02) mm (inch) Isolation: Input to output to power Zero adjustment: -2 to +2% (front) (Output code 4W: Adjustable at 0 V.) Span adjustment: 98 to 102 % (front) MODEL: M6NYV-[1][2]-[3][4] Power LED: Green light turns on when the power is supplied. ■Recommended solderless terminal ORDERING INFORMATION 5.5 max. 4 min. (.22) (.16) 3.2 (.13) dia. • Code number: M6NYV-[1][2]-[3][4] Specify a code from below for each [1] through [4]. (e.g. M6NYV-4W4W-R/K/UL) [1] INPUT / [2] OUTPUT AA: 4 - 20 mA DC (Input resistance 50 Ω) INPUT SPECIFICATIONS / 4 - 20 mA DC (Load resistance 550 Ω max.) • DC Current: Input resistor incorporated A6: 4 - 20 mA DC (Input resistance 50 Ω) / 1 - 5 V DC (Load resistance 5000 Ω min.) INSTALLATION 6A: 1 – 5 V DC (Input resistance 1 MΩ min.) Power Consumption / 4 - 20 mA DC (Load resistance 550 Ω max.) •AC Power input: Max. 2 VA 66: 1 - 5 V DC (Input resistance 1 MΩ min.) •DC Power input: Approx. 0.45 W / 1 - 5 V DC (Load resistance 5000 Ω min.) Operating temperature: -20 to +55°C (-4 to +131°F) 4W4W: -10 - +10 V DC (Input resistance 1 MΩ min.) Operating humidity: 30 to 90 %RH (non-condensing) / -10 - +10 V DC (Load resistance 20 kΩ min.) Mounting: Installation Base (model: M6NBS) or DIN rail Weight: 60 g (2.1 oz) [3] POWER INPUT AC Power PERFORMANCE in percentage of span M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, Accuracy: ±0.1 % 47 – 66 Hz) Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) (UL not available) Line voltage effect: ±0.1 % over voltage range DC Power Insulation resistance: ≥ 100 MΩ with 500 V DC R: 24 V DC http://www.m-system.co.jp/ M6NYV SPECIFICATIONS ES-7901 Rev.4 Page 1/3 5.8 max. (.23) MODEL: M6NYV Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) Low Voltage Directive (2006/95/EC) EN 61010-1 Installation Category II Pollution Degree 2 Max. operating voltage 300 V Input or output to power: Reinforced insulation Input to output: Basic insulation Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW (With the cover open) Power LED Zero Adj. Span Adj. http://www.m-system.co.jp/ M6NYV SPECIFICATIONS ES-7901 Rev.4 Page 2/3 MODEL: M6NYV DIMENSIONS unit: mm (inch) SCREWDRIVER * WIRE INSERTION ANGLE INSERTION ANGLE : approx. 35° : approx. 55° 8–M3 SCREW TERMINAL DIN RAIL HOOK 5 6 7 8 DIN RAIL 35mm wide 1 2 3 4 [1 (.04)] SCREWDRIVER INSERTION ANGLE : approx. 40° 7.5 (.30) 102 (4.02) *Screwdriver stem diameter: 6 mm (.24”) or less • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 1 5 + Amplifier Driver * INPUT OUTPUT – 2 6 – POWER LED 3 U(+) 7 POWER 4 V(–) 8 ** POWER *Input shunt resistor incorporated for current input. **Available only for DC power input type Specifications are subject to change without notice. http://www.m-system.co.jp/ M6NYV SPECIFICATIONS ES-7901 Rev.4 Page 3/3 102 (4.02) CONNECTOR
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M6NYV?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods