Manufacturers
M-SYSTEMS M6NXM
Description
M-Systems M6NXM Screw Terminal Ultra-Slim Signal Conditioner; M6N Series; Potentiometer Transmitter (PC Programmable)
Part Number
M6NXM
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Burnout
Upscale standard; downscale or no burnout optional by programming
Burnout response
Less than or equal to 10 sec
Configurator connection
2.5 dia. miniature jack; RS-232C level
Dielectric strength
2000 V AC @1 minute (input to output to power to ground)
Housing material
Flame-resistant resin (black)
Input and output
M3 screw terminal (torque 0.5 N•m)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
Installation Base (model- M6NBS) or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-20 to +55°C (-4 to +131°F)
Output accuracy
±0.04 % of max. output range
Over-range output
-2 – +102 %(Negative current output is not available.)
Overall accuracy
Input accuracy + output accuracy
Power consumption
Approx. 0.5 W
Power input
Via the Installation Base (model- M6NBS) or M3 screw terminal (torque 0.5 N•m)
Power LED
Green light turns on when the power is supplied.
Programming
Downloaded from PC; input type (range), output type and range, zero and span, burnout type, user’s linearization table, etc.
Recommended solder-less terminal
Max. 5.8 mm (0.23”)wide; Ones with insulation sleeve do not fit.
Response time
Less than or equal to 1 sec. (0 – 90 %)
Span adjustment
98 to 102% (PC programming)
Status indicator LED
Orange LED; Flashing patterns indicate different operating status of the transmitter.
Temp. coefficient
±0.01 %/°C (±0.006 %/°F) of max. span
Weight
65 g (2.3 oz)
Zero adjustment
-2 to +2% (PC programming)
Features
- 7.5-mm wide ultra-slim design
- High-density mounting
- Linearization and burnout protection
- Low profile allows the M6N module mounted in a 120-mm deep panel
- PC programmable
- Power indicator LED
- Provides a DC output proportional to a potentiometer or slide-wire position input
- UL approval
Datasheet
Extracted Text
MODEL: M6NXM Selector on the side of unit before software adjustment.) Screw Terminal Ultra-Slim Signal Conditioners M6N Series POWER INPUT POTENTIOMETER TRANSMITTER DC Power (PC programmable) R: 24 V DC Functions & Features (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) • 7.5-mm wide ultra-slim design • Low profile allows the M6N module mounted in a 120-mm deep panel [2] OPTIONS • Provides a DC output proportional to a potentiometer or STANDARDS & APPROVALS slidewire position input blank: CE marking • Linearization and burnout protection /UL: UL approval (CE marking) • PC programmable • High-density mounting RELATED PRODUCTS • Power indicator LED • PC configurator software (model: M6CFG) • UL approval Downloadable at M-System’s web site. A dedicated cable is required to connect the module to the 7.5 (.30) PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable cable types. 102 (4.02) GENERAL SPECIFICATIONS Connection Input and output: M3 screw terminal (torque 0.5 N·m) 102 Power input: Via the Installation Base (model: M6NBS) (4.02) or M3 screw terminal (torque 0.5 N·m) mm (inch) Recommended solderless terminal: Max. 5.8 mm (0.23”) wide; Ones with insulation sleeve do not fit. Applicable wire size 0.2 – 2.5 mm2 MODEL: M6NXM–1[1]–R[2] Housing material: Flame-resistant resin (black) Isolation: Input to output to power ORDERING INFORMATION Overrange output: -2 – +102 % • Code number: M6NXM-1[1]-R[2] (Negative current output is not available.) Specify a code from below for each [1] and [2]. Zero adjustment: -2 to +2% (PC programming) (e.g. M6NXM-1Z1-R/UL) Span adjustment: 98 to 102% (PC programming) • Potentiometer range (total resistance) (e.g. 0 – 1000 Ω) Burnout: Upscale standard; downscale or no burnout • Output range (e.g. 4 – 20 mA DC) optional by programming Power LED: Green light turns on when the power is supplied. Status indicator LED: Orange LED; Flashing patterns INPUT indicate different operating status of the transmitter. 1: Total resistance 100 – 5000 Ω Programming: Downloaded from PC; input type (range), (Configurator software is used to change the input range.) output type and range, zero and span, burnout type, user’s linearization table, etc. [1] OUTPUT For detailed information, refer to the users manual for the Current PC configurator. Z1: Range 0 – 20 mA DC Configurator connection: 2.5 dia. miniature jack; Voltage RS-232C level V2: Range -10 – +10 V DC V3: Range -5 – +5 V DC (Configurator software is used to change output over the described range of the selected suffix code. For changing between suffix codes, set the Output Range http://www.m-system.co.jp/ M6NXM SPECIFICATIONS ES-7909 Rev.6 Page 1/4 MODEL: M6NXM ■Recommended solderless terminal Mounting: Installation Base (model: M6NBS) or DIN rail 5.5 max. 4 min. Weight: 65 g (2.3 oz) (.22) (.16) 3.2 (.13) dia. PERFORMANCE in percentage of span Overall accuracy: Input accuracy + output accuracy Inversely proportional to the span. See CALCULATION EXAMPLES OF OVERALL ACURACY. • Input accuracy: (% of range) INPUT SPECIFICATIONS 0 – 100 Ω : ±0.05 % Sensing current: ≤ 0.15 mA 0 – 300 Ω : ±0.05 % Minimum span of each range 0 – 600 Ω : ±0.03 % 0 – 100 Ω : 10 Ω 0 – 1200 Ω : ±0.03 % 0 – 300 Ω : 30 Ω 0 – 2500 Ω : ±0.01 % 0 – 600 Ω : 60 Ω 0 – 5000 Ω : ±0.01 % 0 – 1200 Ω : 120 Ω • Output accuracy: ±0.04 % of max. output range 0 – 2500 Ω : 250 Ω Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span 0 – 5000 Ω : 500 Ω Response time: ≤ 1 sec. (0 – 90 %) If not specified, the input range is 0 – 1200 Ω. Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range OUTPUT SPECIFICATIONS Insulation resistance: ≥ 100 MΩ with 500 V DC • DC CURRENT Dielectric strength: 2000 V AC @1 minute (input to output Output range: 0 – 20 mA DC to power to ground) Conformance range: 0 – 20.4 mA DC Minimum span: 1 mA CALCULATION EXAMPLES OF OVERALL ACCURACY Offset: Lower range can be any specific value within the [Example] Total Resistance 0 – 1200 Ω, Input Range 250– output range provided that the minimum span is 750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V maintained. Max. Input Range (1200 Ω) / Span (500 Ω) × 0.01 % Load resistance: Output drive 11 V max. + Max. Output Range (10 V) / Span (4 V) × 0.04 % (e.g. 4 – 20 mA: 550 Ω [11 V/20 mA]) = 0.18 % If not specified, the output range is 4 – 20 mA DC. • DC VOLTAGE Code V2 (wide spans) STANDARDS & APPROVALS Output range: -10 – +10 V DC CE conformity: Conformance range: -10.4 – +10.4 V DC EMC Directive (2004/108/EC) Minimum span: 1 V EN 61000-6-4 (EMI) Code V3 (narrow spans) EN 61000-6-2 (EMS) Output range: -5 – +5 V DC Approval: Conformance range: -5.2 – +5.2 V DC UL/C-UL nonincendive Class I, Division 2, Minimum span: 0.5 V Groups A, B, C, and D hazardous locations Offset: Lower range can be any specific value within the (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) output range provided that the minimum span is UL/C-UL general safety requirements maintained. (UL 61010-1, CAN/CSA-C22.2 No.61010-1) Load resistance: Output drive 1 mA max. (e.g. 1 – 5 V: 5000 Ω [5 V/1 mA]) If not specified, the output range is shown below. V2: 0 – 10 V DC V3: 1 – 5 V DC INSTALLATION Power consumption: Approx. 0.5 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) http://www.m-system.co.jp/ M6NXM SPECIFICATIONS ES-7909 Rev.6 Page 2/4 5.8 max. (.23) MODEL: M6NXM EXTERNAL VIEW � FRONT VIEW (with the cover open) � SIDE VIEW 5 6 7 8 Power LED Status Indicator LED Output Range Selectors Configurator Jack 1 2 3 4 The DIP switch setting is required to select output types before setting a precise output range using PC Configurator Software (model: M6CFG). Refer to the instruction manual for detailed procedures. DIMENSIONS unit: mm (inch) SCREWDRIVER * WIRE INSERTION ANGLE INSERTION ANGLE : approx. 35° : approx. 55° 8–M3 SCREW TERMINAL DIN RAIL HOOK 5 6 7 8 DIN RAIL 35mm wide 1 2 3 4 [1 (.04)] SCREWDRIVER INSERTION ANGLE : approx. 40° 7.5 (.30) 102 (4.02) *Screwdriver stem diameter: 6 mm (.24”) or less • When mounting, no extra space is needed between units. http://www.m-system.co.jp/ M6NXM SPECIFICATIONS ES-7909 Rev.6 Page 3/4 102 (4.02) SW1 SW1 ON OFF 1 2 3 4 5 6 7 8 MODEL: M6NXM SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM STATUS LED DIP SW Isolation POTENTIOMETER max. Digital Output 3 + 1 5 + Computation Driver OUTPUT Low Drift 2 2 6 – Amplifier POWER LED 1 – 4 + min. 7 POWER 3 – 8 CONFIGURATOR JACK POWER Specifications are subject to change without notice. http://www.m-system.co.jp/ M6NXM SPECIFICATIONS ES-7909 Rev.6 Page 4/4 CONNECTOR
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M6NXM?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods