Manufacturers
M-SYSTEMS M6NWVS
Description
M-Systems M6NWVS Screw Terminal Ultra-Slim Signal Conditioner; M6N Series; Signal Transmitter (two isolated outputs)
Part Number
M6NWVS
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Accuracy
±0.1 %
Dielectric strength
2000 V AC @1 minute (input to output 1 to output 2 to power to ground)
Housing Material
Flame-resistant resin (black)
Input and output
M3 screw terminal (torque 0.5 N•m)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output 1 to output 2 to power
Line voltage effect
±0.1 % over voltage range
Mounting
Installation Base (model- M6NBS) or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-20 to +55°C (-4 to +131°F)
Power consumption
Approx. 0.6 W
Power input
Via the Installation Base (model-M6NBS) or M3 screw terminal (torque 0.5 N•m)
Power Led
Green light turns on when the power is supplied.
Recommended solder-less terminal
Max. 5.8 mm (0.23”) wide; Ones with insulation sleeve do not fit.
Span adjustment
98 to 102 % (front)
Temp. coefficient
±0.01 %/°C (±0.006 %/°F)
Weight
60 g (2.1 oz)
Zero adjustment
-2 to +2 % (front)
Features
- 2000V AC isolation
- 7.5-mm wide ultra-slim design
- Fixed range or PC programmable models selectable. User-friendly versatile programming features provided.
- Front power LED provided
- Galvanically isolates process instrumentation signals
- High-density mounting
- Low power consumption
- Low profile allows the M6N module mounted in a 120-mm deep panel
- Output load resistance 550O (at 4-20mA DC)
- Power indicator LED
- Status LED for PC programmable models.
- UL approval
Datasheet
Extracted Text
MODEL: M6NWVS 0: Specify voltage (See INPUT SPECIFICATIONS) Screw Terminal Ultra-Slim Signal Conditioners M6N Series [2] OUTPUT 1 SIGNAL TRANSMITTER Current (two isolated outputs) A: 4 – 20 mA DC (Load resistance 280 Ω max.) Functions & Features D: 0 – 20 mA DC (Load resistance 280 Ω max.) • 7.5-mm wide ultra-slim design Voltage • Low profile allows the M6N module mounted in a 120-mm 5: 0 – 5 V DC (Load resistance 5000 Ω min.) deep panel 6: 1 – 5 V DC (Load resistance 5000 Ω min.) • Galvanically isolates process instrumentation signals • High-density mounting • Power indicator LED [3] OUTPUT 2 • UL approval Same range availability as Output 1 Y: None 7.5 (.30) POWER INPUT DC Power 102 R: 24 V DC (4.02) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) [4] OPTIONS (multiple selections) 102 RESPONSE TIME (0 – 90 %) (4.02) blank: Standard (≤ 0.5 sec.) mm (inch) /K: Fast Response (Approx. 3.5 msec.) STANDARDS & APPROVALS blank: CE marking MODEL: M6NWVS-[1][2][3]-R[4] /UL: UL approval (CE marking) ORDERING INFORMATION GENERAL SPECIFICATIONS • Code number: M6NWVS-[1][2][3]-R[4] Connection Specify a code from below for each [1] through [4]. Input and output: M3 screw terminal (torque 0.5 N·m) (e.g. M6NWVS-AAA-R/K/UL) Power input: Via the Installation Base (model: M6NBS) or M3 screw terminal (torque 0.5 N·m) [1] INPUT Recommended solderless terminal: Max. 5.8 mm (0.23”) Current wide; Ones with insulation sleeve do not fit. A: 4 – 20 mA DC (Input resistance 50 Ω) Applicable wire size 0.2 – 2.5 mm2 B: 2 – 10 mA DC (Input resistance 100 Ω) Housing material: Flame-resistant resin (black) C: 1 – 5 mA DC (Input resistance 200 Ω) Isolation: Input to output 1 to output 2 to power D: 0 – 20 mA DC (Input resistance 50 Ω) Zero adjustment: -2 to +2 % (front) E: 0 – 16 mA DC (Input resistance 50 Ω) Span adjustment: 98 to 102 % (front) F: 0 – 10 mA DC (Input resistance 100 Ω) Power LED: Green light turns on when the power is supplied. G: 0 – 1 mA DC (Input resistance 1000 Ω) ■Recommended solderless terminal H: 10 – 50 mA DC (Input resistance 20 Ω) 5.5 max. 4 min. (.22) (.16) 3.2 (.13) dia. Z: Specify current (See INPUT SPECIFICATIONS) Voltage 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) http://www.m-system.co.jp/ M6NWVS SPECIFICATIONS ES-7907 Rev.5 Page 1/3 5.8 max. (.23) MODEL: M6NWVS INPUT SPECIFICATIONS • DC Current: Input resistor incorporated Specify input resistance value for code Z. (R ≤ 0.125 W ÷ [F.S. Current]2) • DC Voltage: -30 – +30 V DC Minimum span: 100 mV Offset: Max. 1.5 times span Input resistance: 1 MΩ min. (10 kΩ min. with no power supplied) INSTALLATION Power consumption: Approx. 0.6 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6NBS) or DIN rail Weight: 60 g (2.1 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output 1 to output 2 to power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW (With the cover open) Power LED Zero Adj. Output 1 Span Adj. Zero Adj. Output 2 Span Adj. http://www.m-system.co.jp/ M6NWVS SPECIFICATIONS ES-7907 Rev.5 Page 2/3 MODEL: M6NWVS DIMENSIONS unit: mm (inch) SCREWDRIVER * WIRE INSERTION ANGLE INSERTION ANGLE : approx. 35° : approx. 55° 8–M3 SCREW TERMINAL DIN RAIL HOOK 5 6 7 8 DIN RAIL 35mm wide 1 2 3 4 [1 (.04)] SCREWDRIVER INSERTION ANGLE : approx. 40° 7.5 (.30) 102 (4.02) *Screwdriver stem diameter: 6 mm (.24”) or less • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 3 5 + Amplifier Driver * INPUT OUTPUT 1 – 4 6 – Z S Output + 1 Driver OUTPUT 2 – 2 POWER LED + 7 POWER 8 – POWER *Input shunt resistor incorporated for current input. Remark: The section enclosed by broken line is only with 2nd output option. Specifications are subject to change without notice. http://www.m-system.co.jp/ M6NWVS SPECIFICATIONS ES-7907 Rev.5 Page 3/3 102 (4.02) CONNECTOR
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M6NWVS?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods