Manufacturers
M-SYSTEMS M6NVS
Description
M-Systems M6NVS Screw Terminal Ultra-Slim Signal Conditioner; M6N Series; Signal Transmitter
Part Number
M6NVS
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Accuracy
±0.1 %
Dielectric strength
2000 V AC @1 minute (input to output to power to ground)
Housing material
Flame-resistant resin (black)
Input and output
M3 screw terminal (torque 0.5 N•m)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
Installation Base (model- M6NBS) or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-20 to +55°C (-4 to +131°F)
Output code 4W, 5W
Adjustable at 0V. No output below 0mA for the code D.
Power Consumption AC Power input
Max. 2 VA
Power Consumption DC power input
Approx. 0.5 W
Power input
Via the Installation Base (model- M6NBS) (not available for AC power input) or M3 screw terminal (torque 0.5 N•m)
Power LED
Green light turns on when the power is supplied.
Recommended solder-less terminal
Max. 5.8 mm (0.23”) wide; Ones with insulation sleeve do not fit.
Span adjustment
98 to 102 % (front)
Temp. coefficient
±0.01 %/°C (±0.006 %/°F)
Weight
60 g (2.1 oz)
Zero adjustment
-2 to +2% (front)
Features
- 7.5-mm wide ultra-slim design
- Galvanically isolates process instrumentation signals
- High-density mounting
- Low profile allows the M6N module mounted in a 120-mm deep panel
- Power indicator LED
- UL approval
Datasheet
Extracted Text
MODEL: M6NVS 0: Specify voltage (See INPUT SPECIFICATIONS) Screw Terminal Ultra-Slim Signal Conditioners M6N Series [2] OUTPUT SIGNAL TRANSMITTER Current Functions & Features A: 4 – 20 mA DC (Load resistance 550 Ω max.) • 7.5-mm wide ultra-slim design D: 0 – 20 mA DC (Load resistance 550 Ω max.) • Low profile allows the M6N module mounted in a 120-mm G: 0 – 1 mA DC (Load resistance 11 kΩ max.) deep panel Z: Specify current (See OUTPUT SPECIFICATIONS) • Galvanically isolates process instrumentation signals Voltage • High-density mounting 3: 0 – 1 V DC (Load resistance 1000 Ω min.) • Power indicator LED 4: 0 – 10 V DC (Load resistance 10 kΩ min.) • UL approval 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 7.5 (.30) 4W: -10 – +10 V DC (Load resistance 20 kΩ min.) 5W: -5 – +5 V DC (Load resistance 10 kΩ min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) 102 (4.02) [3] POWER INPUT AC Power M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, 102 47 – 66 Hz) (4.02) mm (inch) (UL not available) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) MODEL: M6NVS-[1][2]-[3][4] [4] OPTIONS (multiple selections) ORDERING INFORMATION RESPONSE TIME (0 – 90 %) • Code number: M6NVS-[1][2]-[3][4] blank: Standard (≤ 0.5 sec.) Specify a code from below for each [1] through [4]. /K: Fast Response (Approx. 3.5 msec. voltage output; (e.g. M6NVS-4W4W-R/K/UL) Approx. 25 msec. current output) • Special input and output ranges (For codes Z & 0) STANDARDS & APPROVALS blank: CE marking [1] INPUT /UL: UL approval (CE marking) Current A: 4 – 20 mA DC (Input resistance 50 Ω) GENERAL SPECIFICATIONS B: 2 – 10 mA DC (Input resistance 100 Ω) Connection C: 1 – 5 mA DC (Input resistance 200 Ω) Input and output: M3 screw terminal (torque 0.5 N·m) D: 0 – 20 mA DC (Input resistance 50 Ω) Power input: Via the Installation Base (model: M6NBS) (not E: 0 – 16 mA DC (Input resistance 50 Ω) available for AC power input) F: 0 – 10 mA DC (Input resistance 100 Ω) or M3 screw terminal (torque 0.5 N·m) G: 0 – 1 mA DC (Input resistance 1000 Ω) Recommended solderless terminal: Max. 5.8 mm (0.23”) H: 10 – 50 mA DC (Input resistance 20 Ω) wide; Ones with insulation sleeve do not fit. Z: Specify current (See INPUT SPECIFICATIONS) Applicable wire size 0.2 – 2.5 mm2 Voltage Housing material: Flame-resistant resin (black) 3: 0 – 1 V DC (Input resistance 1 MΩ min.) Isolation: Input to output to power 4: 0 – 10 V DC (Input resistance 1 MΩ min.) Zero adjustment: -2 to +2% (front) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) (Output code 4W, 5W: Adjustable at 0V. No output below 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 0mA for the code D.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) Span adjustment: 98 to 102 % (front) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) http://www.m-system.co.jp/ M6NVS SPECIFICATIONS ES-7906 Rev.5 Page 1/4 MODEL: M6NVS Power LED: Green light turns on when the power is supplied. Low Voltage Directive (2006/95/EC) ■Recommended solderless terminal EN 61010-1 5.5 max. 4 min. Installation Category II (.22) (.16) 3.2 (.13) dia. Pollution Degree 2 Max. operating voltage 300 V Input or output to power: Reinforced insulation Input to output: Basic insulation Approval: UL/C-UL nonincendive Class I, Division 2, INPUT SPECIFICATIONS Groups A, B, C, and D hazardous locations • DC Current: Input resistor incorporated (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) Specify input resistance value for code Z. UL/C-UL general safety requirements (R ≤ 0.125 W ÷ [F.S. Current]2) (UL 61010-1, CAN/CSA-C22.2 No.61010-1) • DC Voltage: -30 – +30 V DC Minimum span: 100 mV Offset: Max. 1.5 times span Input resistance: 1 MΩ min. (10 kΩ min. with no power supplied) OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. • DC Voltage: 0 – 10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 1 V INSTALLATION Power Consumption •AC Power input: Max. 2 VA •DC Power input: Approx. 0.5 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6NBS) or DIN rail Weight: 60 g (2.1 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) http://www.m-system.co.jp/ M6NVS SPECIFICATIONS ES-7906 Rev.5 Page 2/4 5.8 max. (.23) MODEL: M6NVS EXTERNAL VIEW (With the cover open) Power LED Zero Adj. Span Adj. DIMENSIONS unit: mm (inch) SCREWDRIVER * WIRE INSERTION ANGLE INSERTION ANGLE : approx. 35° : approx. 55° 8–M3 SCREW TERMINAL DIN RAIL HOOK 5 6 7 8 DIN RAIL 35mm wide 1 2 3 4 [1 (.04)] SCREWDRIVER INSERTION ANGLE : approx. 40° 7.5 (.30) 102 (4.02) *Screwdriver stem diameter: 6 mm (.24”) or less • When mounting, no extra space is needed between units. http://www.m-system.co.jp/ M6NVS SPECIFICATIONS ES-7906 Rev.5 Page 3/4 102 (4.02) MODEL: M6NVS SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 1 5 + Amplifier Driver * INPUT OUTPUT – 2 6 – POWER LED 3 U(+) 7 POWER 4 V(–) 8 ** POWER *Input shunt resistor incorporated for current input. **Available only for DC power input type Specifications are subject to change without notice. http://www.m-system.co.jp/ M6NVS SPECIFICATIONS ES-7906 Rev.5 Page 4/4 CONNECTOR
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M6NVS?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods