Manufacturers
M-SYSTEMS M6NSN
Description
M-Systems M6NSN Screw Terminal Ultra-Slim Signal Conditioner; M6N Series; Input Loop Powered Isolator
Part Number
M6NSN
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Accuracy
±0.1 %
Applicable wire size
0.2 – 2.5 mm2
Connection
M3 screw terminal (torque 0.5 N•m)
Dielectric strength
1500 V AC @1 minute (input to output); 2000 V AC @1 minute (between channels); 2000 V AC @1 minute (input or output to ground)
Housing material
Flame-resistant resin (black)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output, between channels
Load effect
(factory-calibrated with 250 Omega load) 0.004%/Omega (0 – 600 Omega)
Mounting
Installation Base (model- M6NBS) or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-20 to +55°C (-4 to +131°F)
Recommended solderless terminal
Max. 5.8 mm (0.23”) wide; Ones with insulation sleeve do not fit
Response time
Approx. 20 msec. (0 – 90 %)
Span adjustments
±0.5 % (front)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
60 g (2.1 oz)
Features
- 7.5-mm wide ultra-slim design
- High-density mounting
- Loop-powered design eliminates output loop power supply
- Low profile allows the M6N module mounted in a 120-mm deep panel
- Two isolators housed in one enclosure
- UL approval
Datasheet
Extracted Text
MODEL: M6NSN Screw Terminal Ultra-Slim Signal Conditioners M6N Series GENERAL SPECIFICATIONS Connection: M3 screw terminal (torque 0.5 N·m) Recommended solderless terminal: Max. 5.8 mm (0.23”) INPUT LOOP POWERED ISOLATOR wide; Ones with insulation sleeve do not fit. Functions & Features Applicable wire size 0.2 – 2.5 mm2 • 7.5-mm wide ultra-slim design Housing material: Flame-resistant resin (black) • Low profile allows the M6N module mounted in a 120-mm Isolation: Input to output, between channels deep panel Span adjustments: ±0.5 % (front) • Loop-powered design eliminates output loop power supply ■Recommended solderless terminal • Two isolators housed in one enclosure 5.5 max. 4 min. • High-density mounting (.22) (.16) 3.2 (.13) dia. • UL approval 7.5 (.30) INPUT & OUTPUT 102 (4.02) Equivalent input impedance: 250 Ω plus load resistance with 20 mA input Operational range: 0.05 – 40 mA DC (Accuracy is assured within 0.05 – 22 mA) 102 (4.02) Minimum operating current: 0.05 mA mm (inch) Load resistance: 0 – 600 Ω 18.0 17.4V (approx.) Load resistance 600Ω 16.0 MODEL: M6NSN–[1]DD[2] 14.0 12.0 ORDERING INFORMATION 10.2V (approx.) 10.0 Load resistance 250Ω • Code number: M6NSN-[1]DD[2] 8.0 Specify a code from below for each [1] and [2]. 6.0V (approx.) (e.g. M6NSN-2DD/UL) 6.0 Load resistance 50Ω approx. 5.4 approx. 5.2 approx. 5.0 4.0 4 12 20 [1] NO. OF CHANNELS Input Current (mA) 1: 1 channel 2: 2 channels INSTALLATION INPUT Operating temperature: -20 to +55°C (-4 to +131°F) Current Operating humidity: 30 to 90 %RH (non-condensing) D: 0 – 20 mA DC (4 – 20 mA DC) Mounting: Installation Base (model: M6NBS) or DIN rail Weight: 60 g (2.1 oz) OUTPUT Current PERFORMANCE in percentage of span D: 0 – 20 mA DC (4 – 20 mA DC) Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: Approx. 20 msec. (0 – 90 %) [2] OPTIONS Load effect: (factory-calibrated with 250 Ω load) STANDARDS & APPROVALS 0.004%/Ω (0 – 600 Ω) blank: CE marking Insulation resistance: ≥ 100 MΩ with 500 V DC /UL: UL approval (CE marking) Dielectric strength: 1500 V AC @1 minute (input to output) http://www.m-system.co.jp/ M6NSN SPECIFICATIONS ES-7905 Rev.4 Page 1/3 5.8 max. (.23) Voltage Across Input Terminals (V) MODEL: M6NSN 2000 V AC @1 minute (between channels) 2000 V AC @1 minute (input or output to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW (With the cover open) Channel 2 Span Adj. Channel 1 Span Adj. DIMENSIONS unit: mm (inch) SCREWDRIVER * WIRE INSERTION ANGLE INSERTION ANGLE : approx. 35° : approx. 55° 8–M3 SCREW TERMINAL DIN RAIL HOOK 5 6 7 8 DIN RAIL 35mm wide 1 2 3 4 [1 (.04)] SCREWDRIVER INSERTION ANGLE : approx. 40° 7.5 (.30) 102 (4.02) *Screwdriver stem diameter: 6 mm (.24”) or less • When mounting, no extra space is needed between units. http://www.m-system.co.jp/ M6NSN SPECIFICATIONS ES-7905 Rev.4 Page 2/3 102 (4.02) MODEL: M6NSN SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation + Inverter + 1 5 OUTPUT S – Channel 1 INPUT 6 – 2 Isolation + 3 Inverter 7 + OUTPUT Channel 2 INPUT S 8 – – 4 Specifications are subject to change without notice. http://www.m-system.co.jp/ M6NSN SPECIFICATIONS ES-7905 Rev.4 Page 3/3 CONNECTOR
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M6NSN?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods