Manufacturers
M-SYSTEMS M6DXM
Description
M-System M6DXM Euro Terminal Ultra-Slim Signal Conditioner; M6D Series; Potentiometer Transmitter (PC Programmable)
Part Number
M6DXM
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Applicable wire size
0.2 to 2.5 mm2
Burnout
Upscale standard; downscale or no burnout optional by programming
Burnout response
Less than or equal to 10 sec
Configurator connection
2.5 dia. miniature jack; RS-232C level
Dielectric strength
2000 V AC @1 minute (input to output to power to ground)
Housing material
Flame-resistant resin (black)
Input accuracy
(% of range) 0 – 100 OMEGA- ±0.05 %; 0 – 300 OMEGA- ±0.05 %; 0 – 600 OMEGA- ±0.03 %; 0 – 1200 OMEGA- ±0.03 %; 0 – 2500 OMEGA- ±0.01 %; 0 – 5000 OMEGA -±0.01 %
Input and output
Euro terminal (torque 0.3 N•m)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
Installation Base (model-M6DBS) or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-20 to +55°C (-4 to +131°F)
Output accuracy
±0.04 % of max. output range
Over-range output
-2 – +102 %(Negative current output is not available.)
Overall accuracy
Input accuracy + output accuracy; Inversely proportional to the span
Power consumption
Approx. 0.5 W
Power input
Via the Installation Base (model- M6DBS) or Euro terminal (torque 0.3 N•m)
Power LED
Green light turns on when the power is supplied.
Response time
Less than or equal to 1 sec. (0 – 90 %)
Span adjustment
98 to 102% (PC programming)
Status indicator LED
Orange LED; Flashing patterns indicate different operating status of the transmitter.
Temp. coefficient
±0.01 %/°C (±0.006 %/°F) of max. span
Weight
65 g (2.3 oz)
Zero adjustment
-2 to +2% (PC programming)
Features
- 5.9-mm wide ultra-slim design
- High-density mounting
- Linearization and burnout protection
- Low profile allows the M6D module mounted in a 120-mm deep panel
- PC programmable
- Power indicator LED
- Provides a DC output proportional to a potentiometer or slidewire position input
- UL approval
Datasheet
Extracted Text
MODEL: M6DXM For changing between suffix codes, set the Output Range Euro Terminal Ultra-Slim Signal Conditioners M6D Series Selector on the side of unit before software adjustment.) POTENTIOMETER TRANSMITTER POWER INPUT (PC programmable) DC Power Functions & Features R: 24 V DC • 5.9-mm wide ultra-slim design (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) • Low profile allows the M6D module mounted in a 120-mm deep panel • Provides a DC output proportional to a potentiometer or [2] OPTIONS slidewire position input STANDARDS & APPROVALS • Linearization and burnout protection blank: CE marking • PC programmable /UL: UL approval (CE marking) • High-density mounting • Power indicator LED RELATED PRODUCTS • UL approval • PC configurator software (model: M6CFG) Downloadable at M-System’s web site. 5.9 (.23) A dedicated cable is required to connect the module to the PC. Please refer to the internet software download site or the users manual for the PC configurator for applicable 94 cable types. (3.70) GENERAL SPECIFICATIONS Connection 102 Input and output: Euro terminal (torque 0.3 N·m) (4.02) Power input: Via the Installation Base (model: M6DBS) mm (inch) or Euro terminal (torque 0.3 N·m) Applicable wire size: 0.2 to 2.5 mm2 Housing material: Flame-resistant resin (black) Isolation: Input to output to power MODEL: M6DXM–1[1]–R[2] Overrange output: -2 – +102 % (Negative current output is not available.) ORDERING INFORMATION Zero adjustment: -2 to +2% (PC programming) • Code number: M6DXM-1[1]-R[2] Span adjustment: 98 to 102% (PC programming) Specify a code from below for each [1] and [2]. Burnout: Upscale standard; downscale or no burnout (e.g. M6DXM-1Z1-R/UL) optional by programming • Potentiometer range (total resistance) (e.g. 0 – 1000 Ω) Power LED: Green light turns on when the power is supplied. • Output range (e.g. 4 – 20 mA DC) Status indicator LED: Orange LED; Flashing patterns indicate different operating status of the transmitter. Programming: Downloaded from PC; input type (range), INPUT output type and range, zero and span, burnout type, user’s 1: Total resistance 100 – 5000 Ω linearization table, etc. (Configurator software is used to change the input range.) For detailed information, refer to the users manual for the PC configurator. [1] OUTPUT Configurator connection: 2.5 dia. miniature jack; Current RS-232C level Z1: Range 0 – 20 mA DC Voltage INPUT SPECIFICATIONS V2: Range -10 – +10 V DC Sensing current: ≤ 0.15 mA V3: Range -5 – +5 V DC Minimum span of each range (Configurator software is used to change output over the 0 – 100 Ω : 10 Ω described range of the selected suffix code. http://www.m-system.co.jp/ M6DXM SPECIFICATIONS ES-7834 Rev.6 Page 1/4 MODEL: M6DXM 0 – 300 Ω : 30 Ω 0 – 1200 Ω : ±0.03 % 0 – 600 Ω : 60 Ω 0 – 2500 Ω : ±0.01 % 0 – 1200 Ω : 120 Ω 0 – 5000 Ω : ±0.01 % 0 – 2500 Ω : 250 Ω • Output accuracy: ±0.04 % of max. output range 0 – 5000 Ω : 500 Ω Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span If not specified, the input range is 0 – 1200 Ω. Response time: ≤ 1 sec. (0 – 90 %) Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range OUTPUT SPECIFICATIONS Insulation resistance: ≥ 100 MΩ with 500 V DC • DC CURRENT Dielectric strength: 2000 V AC @1 minute (input to output Output range: 0 – 20 mA DC to power to ground) Conformance range: 0 – 20.4 mA DC Minimum span: 1 mA Offset: Lower range can be any specific value within the CALCULATION EXAMPLES OF OVERALL ACCURACY output range provided that the minimum span is [Example] Total Resistance 0 – 1200 Ω, Input Range 250– maintained. 750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V Load resistance: Output drive 11 V max. Max. Input Range (1200 Ω) / Span (500 Ω) × 0.01 % (e.g. 4 – 20 mA: 550 Ω [11 V/20 mA]) + Max. Output Range (10 V) / Span (4 V) × 0.04 % If not specified, the output range is 4 – 20 mA DC. = 0.18 % • DC VOLTAGE Code V2 (wide spans) STANDARDS & APPROVALS Output range: -10 – +10 V DC CE conformity: Conformance range: -10.4 – +10.4 V DC EMC Directive (2004/108/EC) Minimum span: 1 V EN 61000-6-4 (EMI) Code V3 (narrow spans) EN 61000-6-2 (EMS) Output range: -5 – +5 V DC Approval: Conformance range: -5.2 – +5.2 V DC UL/C-UL nonincendive Class I, Division 2, Minimum span: 0.5 V Groups A, B, C, and D hazardous locations Offset: Lower range can be any specific value within the (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) output range provided that the minimum span is UL/C-UL general safety requirements maintained. (UL 61010-1, CAN/CSA-C22.2 No.61010-1) Load resistance: Output drive 1 mA max. (e.g. 1 – 5 V: 5000 Ω [5 V/1 mA]) If not specified, the output range is shown below. V2: 0 – 10 V DC V3: 1 – 5 V DC INSTALLATION Power consumption: Approx. 0.5 W Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Installation Base (model: M6DBS) or DIN rail Weight: 65 g (2.3 oz) PERFORMANCE in percentage of span Overall accuracy: Input accuracy + output accuracy Inversely proportional to the span. See CALCULATION EXAMPLES OF OVERALL ACURACY. • Input accuracy: (% of range) 0 – 100 Ω : ±0.05 % 0 – 300 Ω : ±0.05 % 0 – 600 Ω : ±0.03 % http://www.m-system.co.jp/ M6DXM SPECIFICATIONS ES-7834 Rev.6 Page 2/4 MODEL: M6DXM EXTERNAL VIEW � FRONT VIEW (with the cover open) � SIDE VIEW 5 6 7 8 Power LED Status Indicator LED Output Range Selectors Configurator Jack 1 2 3 4 The DIP switch setting is required to select output types before setting a precise output range using PC Configurator Software (model: M6CFG). Refer to the instruction manual for detailed procedures. DIMENSIONS unit: mm (inch) WIRE INSERTION ANGLE: approx. 7° 8–M3 EURO TERMINAL DIN RAIL HOOK 5 6 7 8 DIN RAIL 35mm wide 1 2 3 4 SCREWDRIVER [0.5 (.02)] INSERTION ANGLE : approx. 40° 5.9 (.23) 102 (4.02) • When mounting, no extra space is needed between units. http://www.m-system.co.jp/ M6DXM SPECIFICATIONS ES-7834 Rev.6 Page 3/4 94 (3.70) SW1 SW1 ON OFF 1 2 3 4 5 6 7 8 MODEL: M6DXM SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM STATUS LED DIP SW Isolation POTENTIOMETER max. Digital Output 3 + 1 5 + Computation Driver OUTPUT Low Drift 2 2 6 – Amplifier POWER LED 1 – 4 + min. 7 POWER 3 – 8 CONFIGURATOR JACK POWER Specifications are subject to change without notice. http://www.m-system.co.jp/ M6DXM SPECIFICATIONS ES-7834 Rev.6 Page 4/4 CONNECTOR
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M6DXM?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods