MODEL: M6DDY Euro Terminal Ultra-Slim Signal Conditioners M6D Series [2] OPTIONS STANDARDS & APPROVALS blank: CE marking CURRENT LOOP SUPPLY /UL: UL approval (CE marking) Functions & Features • 5.9-mm wide ultra-slim design • Low profile allows the M6D module mounted in a 120-mm GENERAL SPECIFICATIONS deep panel Connection • Powers a two-wire transmitter and galvanically isolates its Input and output: Euro terminal (torque 0.3 N·m) output signal Power input: Via the Installation Base (model: M6DBS) • High-density mounting or Euro terminal (torque 0.3 N·m) • Power indicator LED Applicable wire size: 0.2 to 2.5 mm2 • UL approval Housing material: Flame-resistant resin (black) Isolation: Input to output to power 5.9 (.23) Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) Power LED: Green light turns on when the power is supplied. 94 (3.70) SUPPLY OUTPUT (across the terminals 3 – 4) Output voltage: 24 – 30 V DC with no load 18 V DC min. at 20 mA 102 (4.02) Current rating: 22 mA DC max. mm (inch) • Shortcircuit Protection Current limited: 45 mA max. Protected time duration: No limit MODEL: M6DDY–[1]–R[2] INPUT SPECIFICATIONS • DC Current: Input resistor incorporated ORDERING INFORMATION • Code number: M6DDY-[1]-R[2] INSTALLATION Specify a code from below for each [1] and [2]. Power consumption: Approx. 1 W (1.1 W for UL approval) (e.g. M6DDY-A-R/UL) Operating temperature: -20 to +55°C (-4 to +131°F) Operating humidity: 30 to 90 %RH (non-condensing) INPUT Mounting: Installation Base (model: M6DBS) or DIN rail Current Weight: 60 g (2.1 oz) 4 – 20 mA DC (Input resistance 249.5 Ω) PERFORMANCE in percentage of span [1] OUTPUT Accuracy: ±0.1 % Current Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) A: 4 – 20 mA DC (Load resistance 550 Ω max.) Response time: ≤ 100 msec. (0 – 90 %) Voltage Line voltage effect: ±0.1 % over voltage range 4: 0 – 10 V DC (Load resistance 10 kΩ min.) Insulation resistance: ≥ 100 MΩ with 500 V DC 5: 0 – 5 V DC (Load resistance 5000 Ω min.) Dielectric strength: 2000 V AC @1 minute (input to output 6: 1 – 5 V DC (Load resistance 5000 Ω min.) to power to ground) POWER INPUT STANDARDS & APPROVALS DC Power CE conformity: R: 24 V DC EMC Directive (2004/108/EC) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) EN 61000-6-4 (EMI) http://www.m-system.co.jp/ M6DDY SPECIFICATIONS ES-7824 Rev.6 Page 1/3 MODEL: M6DDY EN 61000-6-2 (EMS) Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010-1, CAN/CSA-C22.2 No.61010-1) EXTERNAL VIEW (With the cover open) Power LED Zero Adj. Span Adj. DIMENSIONS unit: mm (inch) WIRE INSERTION ANGLE: approx. 7° 8–M3 EURO TERMINAL DIN RAIL HOOK 5 6 7 8 DIN RAIL 35mm wide 1 2 3 4 SCREWDRIVER [0.5 (.02)] INSERTION ANGLE : approx. 40° 5.9 (.23) 102 (4.02) • When mounting, no extra space is needed between units. http://www.m-system.co.jp/ M6DDY SPECIFICATIONS ES-7824 Rev.6 Page 2/3 94 (3.70) MODEL: M6DDY SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM 2-WIRE TRANSMITTER Shortcircuit 24V DC + + 3 Portection Supply – – 4 Z S Isolation Low Drift Output + + 1 5 + Amplifier Driver MONITOR V OUTPUT – – 2 6 – 249.5Ω POWER LED 7 + POWER 8 – POWER � When Used as DC Supply � When Used as Isolator + + + 3 3 – – – 4 4 2-WIRE + + 1 1 TRANSMITTER INPUT – – 2 2 249.5Ω 249.5Ω Specifications are subject to change without notice. http://www.m-system.co.jp/ M6DDY SPECIFICATIONS ES-7824 Rev.6 Page 3/3 CONNECTOR