MODEL: M5VF Super-mini Terminal Block Signal Conditioners M5-UNIT [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) SIGNAL TRANSMITTER Z: Specify current (See OUTPUT SPECIFICATIONS) (high speed response) (Not selectable with the power input code M) Functions & Features Voltage • Converts a DC input into an isolated DC signal 4: 0 – 10 V DC (Load resistance 1000 Ω min.) • Ultra-high speed response 150 μsec. 5: 0 – 5 V DC (Load resistance 500 Ω min.) • High-density mounting 6: 1 – 5 V DC (Load resistance 500 Ω min.) • Power LED 4W: -10 – +10 V DC (Load resistance 8000 Ω min.) • CE marking for 24 V DC power (For the input suffix codes 4W and 5W only) 5W: -5 – +5 V DC (Load resistance 4000 Ω min.) 25 (.98) (For the input suffix codes 4W and 5W only) 0: Specify voltage (See OUTPUT SPECIFICATIONS) (Not selectable with the power input code M) 97 (3.82) [3] POWER INPUT AC Power 41 (1.61) M: 85 – 264 V AC (Operational voltage range 85 – 264 V, mm (inch) 47 –66 Hz) (CE not available) MODEL: M5VF-[1][2]-[3][4] DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) ORDERING INFORMATION Specify a code from below for each [1] through [4]. • Code number: M5VF-[1][2]-[3][4] [4] OPTIONS (e.g. M5VF-4W4W-R/Q) blank: none Specify variables. /Q: With options (specify the specification) • Special input and output ranges (For codes Z & 0) • Specify the specification for option code /Q SPECIFICATIONS OF OPTION: Q (e.g. /C01 ) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating [1] INPUT /C02: Polyurethane coating Current /C03: Rubber coating A: 4 – 20 mA DC (Input resistance 249 Ω) B: 2 – 10 mA DC (Input resistance 499 Ω) GENERAL SPECIFICATIONS C: 1 – 5 mA DC (Input resistance 1000 Ω) Construction: Terminal block D: 0 – 20 mA DC (Input resistance 49.9 Ω) Connection: M3.5 screw terminals (torque 0.8 N·m) E: 0 – 16 mA DC (Input resistance 61.9 Ω) Screw terminal: Nickel-plated steel F: 0 – 10 mA DC (Input resistance 100 Ω) Housing material: Flame-resistant resin (black) G: 0 – 1 mA DC (Input resistance 1000 Ω) Isolation: Input to output to power H: 10 – 50 mA DC (Input resistance 20 Ω) Zero adjustment: -2 to +2 % (front) Z: Specify current (See INPUT SPECIFICATIONS) (±1 % with the input suffix codes 4W and 5W selected) Voltage Span adjustment: 98 to 102 % (front) 3: 0 – 1 V DC (Input resistance 1 MΩ min.) (99 to 101 % with the input suffix codes 4W and 5W 4: 0 – 10 V DC (Input resistance 1 MΩ min.) selected.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) Power LED: Green light turns on when the power is supplied. 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) http://www.m-system.co.jp/ M5VF SPECIFICATIONS ES-2464 Rev.9 Page 1/3 MODEL: M5VF INPUT SPECIFICATIONS ■ DC Current: Input resistor incorporated Specify input resistance value for code Z. (R ≤ 0.125 W ÷ [F.S. Current]2) ■ DC Voltage: -30 – +30 V DC Minimum span: 1 V Offset: Max. 1.5 times span Input resistance: 1 MΩ min. (10 kΩ min. at power loss) OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max.; 9 V max. for the full-scale output < 3 mA ■ DC Voltage: 0 – 10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; at ≥ 1 V INSTALLATION Power Consumption •AC: Approx. 2 VA at 100 V Approx. 2 VA at 200 V Approx. 3 VA at 264 V •DC: Approx. 2 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 80 g (2.8 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) ±0.02 %/°C (±0.01 %/°F) with AC power Response time: ≤ 150 μsec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength (input to output to power to ground) DC powered: 2000 V AC @1 minute AC powered: 1500 V AC @1 minute STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EMI EN 61000-6-4: 2007 EMS EN 61000-6-2: 2005 http://www.m-system.co.jp/ M5VF SPECIFICATIONS ES-2464 Rev.9 Page 2/3 MODEL: M5VF FRONT VIEW 1 2 Power LED 3 4 Span Adj. Zero Adj. 5 6 7 8 EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 7.3 (.29) 8–M3.5 SCREW 1 2 DIN RAIL 3 4 35mm wide 5 6 7 8 25 (.98) 41 (1.61) [3.3 (.13)] • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + + 3 5 Amplifier Driver * SIGNAL SOURCE OUTPUT – – 4 6 POWER LED 1 7 U(+) POWER 2 8 V(–) *Input shunt resistor incorporated for current input. The M5VF, by its fast-response feature, is not designed to eliminate noise present in the input signal. Use a shielded twisted-pair cable for preventing noise entering through the input wiring. Specifications are subject to change without notice. http://www.m-system.co.jp/ M5VF SPECIFICATIONS ES-2464 Rev.9 Page 3/3 3 (.12) 94 (3.70) 35.4 (1.39)