Manufacturers
M-SYSTEMS M5RS
Description
M-Systems M5RS M5-UNIT Series Terminal Block Signal Conditioner; RTD Transmitter
Part Number
M5RS
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
AC Power input
Approx. 2 VA at 100 V; Approx. 3 VA at 200 V; Approx. 3 VA at 264V
Accuracy
±0.2 %
Burnout response
Less than or equal to 10 sec
Connection
M3.5 screw terminals (torque 0.8 N•m)
Construction
Terminal block
DC Power input
Approx. 2 W
Dielectric strength (input to output to power to ground)
DC powered: 2000 V AC @1 minute; AC powered: 1500 V AC @1 minute
Housing material
Flame-resistant resin (black)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Linearization
Standard
Mounting
DIN rail
Operating humidity
0 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Power LED
Green light turns on when the power is supplied.
Screw terminal
Nickel-plated steel
Span adjustment
98 to 102 % (front)
Temp. coefficient
±0.015 %/°C or ±0.008 %/°F(at 200°C or 360°F or greater spans); ±0.02%/°C or ±0.01 %/°F (at narrower than 200°C or 360°F spans)
Weight
80 g (2.8 oz)
Zero adjustment
-2 to +2 % (front)
Features
- Accepts direct input from an RTD and provides a standard process signal
- CE marking for 24 V DC power
- Fast response type available
- High-density mounting
- Linearization and burnout
- Power LED
Datasheet
Extracted Text
MODEL: M5RS Z: Specify current (See OUTPUT SPECIFICATIONS) Super-mini Terminal Block Signal Conditioners M5-UNIT Voltage 1: 0 – 10 mV DC (Load resistance 100 kΩ min.) RTD TRANSMITTER (CE not available) Functions & Features 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) • Accepts direct input from an RTD and provides a standard (CE not available) process signal 3: 0 – 1 V DC (Load resistance 100 Ω min.) • Linearization and burnout 4: 0 – 10 V DC (Load resistance 1000 Ω min.) • Fast response type available 5: 0 – 5 V DC (Load resistance 500 Ω min.) • High-density mounting 6: 1 – 5 V DC (Load resistance 500 Ω min.) • Power LED 1W: -10 – +10 mV DC (Load resistance 100 kΩ min.) • CE marking for 24 V DC power (CE not available) 25 (.98) 2W: -100 – +100 mV DC (Load resistance 100 kΩ min.) (CE not available) 3W: -1 – +1 V DC (Load resistance 800 Ω min.) 97 4W: -10 – +10 V DC (Load resistance 8000 Ω min.) (3.82) 5W: -5 – +5 V DC (Load resistance 4000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) 01: Specify voltage (See OUTPUT SPECIFICATIONS) 41 (1.61) mm (inch) (CE not available) [3] POWER INPUT MODEL: M5RS-[1][2]-[3][4] AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, ORDERING INFORMATION 47 –66 Hz) Specify a code from below for each [1] through [4]. (CE not available) • Code number: M5RS-[1][2]-[3][4] DC Power (e.g. M5RS-4A-R/K/BL/Q) R: 24 V DC Specify variables. (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) • Temperature range (e.g. 0 – 500°C) • Special output range (For codes Z & 0) [4] OPTIONS (multiple selections) • Specify the specification for option code /Q Response Time (0 – 90 %) (e.g. /C01 /V01) blank: Standard (≤ 0.5 sec.) /K: Fast Response (Approx. 25 msec.) [1] INPUT RTD (2- or 3-wire) Burnout 1: JPt 100 (JIS'89) blank: Upscale burnout (Usable range: -200 to +500°C, -328 to +932°F; min.span: 50°C, 90°F) /BL: Downscale burnout 3: Pt 100 (JIS'89) Other Options (Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F) blank: none 4: Pt 100 (JIS'97, IEC) /Q: Option other than the above (specify the specification) (Usable range: -200 to +850°C, -328 to +1562°F; min.span: 50°C, 90°F) 5: Pt 50 Ω (JIS'81) SPECIFICATIONS OF OPTION: Q (multiple selections) (Usable range: -200 to +500°C, -328 to +932°F; min.span: 100°C, 180°F) COATING (For the detail, refer to M-System's web site.) 6: Ni 508.4 Ω /C01: Silicone coating (Usable range: -50 to +200°C, -58 to +392°F; min.span: 30°C, 54°F) /C02: Polyurethane coating 0: Specify /C03: Rubber coating ADJUSTMENT [2] OUTPUT /V01: Multi-turn fine adjustment Current /VN: Sealed adjustment holes A: 4 – 20 mA DC (Load resistance 550 Ω max.) D: 0 – 20 mA DC (Load resistance 550 Ω max.) http://www.m-system.co.jp/ M5RS SPECIFICATIONS ES-2463 Rev.10 Page 1/3 MODEL: M5RS ±0.015 %/°C or ±0.008 %/°F GENERAL SPECIFICATIONS (at 200°C or 360°F or greater spans) Construction: Terminal block ±0.02 %/°C or ±0.01 %/°F Connection: M3.5 screw terminals (torque 0.8 N·m) (at narrower than 200°C or 360°F spans) Screw terminal: Nickel-plated steel Burnout response: ≤ 10 sec. Housing material: Flame-resistant resin (black) Line voltage effect: ±0.1 % over voltage range Isolation: Input to output to power Insulation resistance: ≥ 100 MΩ with 500 V DC Zero adjustment: -2 to +2 % (front) Dielectric strength (input to output to power to ground) Span adjustment: 98 to 102 % (front) DC powered: 2000 V AC @1 minute Linearization: Standard AC powered: 1500 V AC @1 minute Power LED: Green light turns on when the power is supplied. STANDARDS & APPROVALS INPUT SPECIFICATIONS CE conformity: Input: 2- or 3-wire RTDs EMC Directive (2004/108/EC) Maximum leadwire resistance: 200 Ω per wire (3-wire) EMI EN 61000-6-4: 2007 Sensing current: 2 mA (Pt); 1 mA (Ni 508.4 Ω) EMS EN 61000-6-2: 2005 OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. ■ DC Voltage Output code 0 (CE) Voltage range: -10 – +10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; at ≥1 V Max. 1.25 mA output drive for negative voltage Output code 01 (Not CE) Voltage range: -1 – +1 V DC Minimum span: 10 mV Offset: Max. 1.5 times span Load resistance: Min. 100 kΩ Min. 1 MΩ for negative voltage INSTALLATION Power Consumption •AC Power input: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 3 VA at 264 V •DC power input: Approx. 2 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 80 g (2.8 oz) PERFORMANCE in percentage of span Accuracy: ±0.2 % Temp. coefficient: http://www.m-system.co.jp/ M5RS SPECIFICATIONS ES-2463 Rev.10 Page 2/3 MODEL: M5RS FRONT VIEW 1 2 Power LED 3 4 Span Adj. Zero Adj. 5 6 7 8 DIMENSIONS unit: mm (inch) 7.3 (.29) 8–M3.5 SCREW 1 2 DIN RAIL 3 4 35mm wide 5 6 7 8 25 (.98) 41 (1.61) [3.3 (.13)] • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Burnout RTD A 4 Z S Isolation Reference + Resistor Differential Voltage Output – B 3 5 + Amplifier Amplifier Driver Constant OUTPUT Current B 2 6 – POWER LED 1 Linearizer 7 U(+) POWER 8 V(–) Specifications are subject to change without notice. http://www.m-system.co.jp/ M5RS SPECIFICATIONS ES-2463 Rev.10 Page 3/3 3 (.12) 94 (3.70) 35.4 (1.39)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M5RS?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods