M5MS - M-SYSTEMS - Industrial Trading

Description

M-Systems M5MS M5-UNIT Series Terminal Block Signal Conditioner; Potentiometer Transmitter

Part Number

M5MS

Price

Request Quote

Manufacturer

M-SYSTEMS

Lead Time

Request Quote

Category

Signal Conditioning

Specifications

AC Power input

Approx. 2 VA at 100 V; Approx. 3 VA at 200 V; Approx. 3 VA at 264V

Accuracy

±0.1 %

Connection

M3.5 screw terminals (torque 0.8 N•m)

Construction

Terminal block

DC Power input

Approx. 2 W

Dielectric strength (input to output to power to ground)

DC powered: 2000 V AC @1 minute; AC powered: 1500 V AC @1 minute

Housing material

Flame-resistant resin (black)

Insulation resistance

Greater than or equal to 100 M Omega with 500 V DC

Isolation

Input to output to power

Line voltage effect

±0.1 % over voltage range

Mounting

DIN rail

Operating humidity

0 to 90 %RH (non-condensing)

Operating temperature

-5 to +55°C (23 to 131°F)

Power LED

Green light turns on when the power is supplied.

Screw terminal

Nickel-plated steel

Span adjustment

70 – 100 % of total resistance (front)

Temp. coefficient

±0.015 %/°C (±0.008 %/°F)

Weight

80 g (2.8 oz)

Zero adjustment

0 – 30 % of total resistance (front)

Features

2000V AC isolation (1500V AC for AC powered)
CE marking for 24 V power
Constant voltage excitation
Fast response type available
High-density mounting
Only 41 mm (1.61 in") deep modules can be installed anywhere, even behind the panel cover
Power indicator LED
Provides a standard DC output proportional to potentiometer or slide-wire position input
Selectable power input 24V DC, 85–264V AC
Standard DIN rail mounting
The M5 Series features single channel four-wire model

Datasheet

M5MS-1980098223.pdf

90 KiB

Download

Extracted Text

MODEL: M5MS Super-mini Terminal Block Signal Conditioners M5-UNIT (CE not available) 2W: -100 – +100 mV DC (Load resistance 100 kΩ min.) (CE not available) POTENTIOMETER TRANSMITTER 3W: -1 – +1 V DC (Load resistance 800 Ω min.) 4W: -10 – +10 V DC (Load resistance 8000 Ω min.) Functions & Features 5W: -5 – +5 V DC (Load resistance 4000 Ω min.) • Provides a standard DC output proportional to a 0: Specify voltage (See OUTPUT SPECIFICATIONS) potentiometer or slidewire position input 01: Specify voltage (See OUTPUT SPECIFICATIONS) • Constant voltage excitation (CE not available) • Fast response type available • High-density mounting • Power LED [2] POWER INPUT • CE marking for 24 V power AC Power 25 (.98) M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 –66 Hz) (CE not available) DC Power 97 (3.82) R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) 41 (1.61) mm (inch) [3] OPTIONS RESPONSE TIME (0 – 90 %) blank: Standard (≤ 0.5 sec.) M5MS-❑-❑❑ /K: Fast Response (Approx. 25 msec.) OTHER OPTIONS ORDERING INFORMATION blank: none Specify a code from below for each [1] through [3]. /Q: Option other than the above (specify the specification) • Code number: M5MS-[1]-[2][3] (e.g. M5MS-A-R/K/Q) OPTION SPECIFICATIONS OF /Q (multiple selections) Specify variables. COATING (For the detail, refer to M-system's web site.) • Special output range (For codes Z & 0) /C01: Silicone coating • Specify the specification for option code /Q /C02: Polyurethane coating (e.g. /C01 /V01) /C03: Rubber coating ADJUSTMENT /V01: Multi-turn fine adjuster INPUT Total resistance 100 Ω – 10 kΩ GENERAL SPECIFICATIONS Construction: Terminal block [1] OUTPUT Connection: M3.5 screw terminals (torque 0.8 N·m) Current Screw terminal: Nickel-plated steel A: 4 – 20 mA DC (Load resistance 550 Ω max.) Housing material: Flame-resistant resin (black) D: 0 – 20 mA DC (Load resistance 550 Ω max.) Isolation: Input to output to power Z: Specify current (See OUTPUT SPECIFICATIONS) Zero adjustment: 0 – 30 % of total resistance (front) Voltage Span adjustment: 70 – 100 % of total resistance (front) 1: 0 – 10 mV DC (Load resistance 100 kΩ min.) Power LED: Green light turns on when the power is supplied. (CE not available) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) (CE not available) INPUT SPECIFICATIONS 3: 0 – 1 V DC (Load resistance 100 Ω min.) Minimum span: 70 % of total resistance 4: 0 – 10 V DC (Load resistance 1000 Ω min.) Excitation: 0.5 V DC 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) 1W: -10 – +10 mV DC (Load resistance 100 kΩ min.) http://www.m-system.co.jp/ M5MS SPECIFICATIONS ES-2465 Rev.6 Page 1/3 MODEL: M5MS OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. • DC Voltage Output code 0 (CE) Voltage range: -10 – +10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; at ≥1 V Max. 1.25 mA output drive for negative voltage Output code 01 (Not CE) Voltage range: -1 – +1 V DC Minimum span: 10 mV Offset: Max. 1.5 times span Load resistance: Min. 100 kΩ Min. 1 MΩ for negative voltage INSTALLATION Power Consumption •AC Power input: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 3 VA at 264 V •DC Power input: Approx. 2 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 80 g (2.8 oz) PERFORMANCE in percentage of span Acuuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength (input to output to power to ground) DC powered: 2000 V AC @1 minute AC powered: 1500 V AC @1 minute STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) http://www.m-system.co.jp/ M5MS SPECIFICATIONS ES-2465 Rev.6 Page 2/3 MODEL: M5MS FRONT VIEW 1 2 Power LED 3 4 Span Adj. Zero Adj. 5 6 7 8 DIMENSIONS unit: mm (inch) 7.3 (.29) 8–M3.5 SCREW 1 2 DIN RAIL 3 4 35mm wide 5 6 7 8 25 (.98) 41 (1.61) [3.3 (.13)] • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM POTENTIOMETER max. Excitation Volt. 3 + 4 Z S Isolation Generator Low Drift Output 2 + 3 5 Amplifier Driver OUTPUT 1 – – 2 6 min. POWER LED 1 7 U(+) POWER 8 V(–) Specifications are subject to change without notice. http://www.m-system.co.jp/ M5MS SPECIFICATIONS ES-2465 Rev.6 Page 3/3 3 (.12) 94 (3.70) 35.4 (1.39)

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products