Manufacturers
M-SYSTEMS M5DY
Description
M-Systems M5DY M5-UNIT Series Terminal Block Signal Conditioner; Current Loop Supply
Part Number
M5DY
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
AC Power input
Approx. 3 VA
AC powered
1500 V AC @1 minute
Accuracy
±0.1 %
Connection
M3.5 screw terminals (torque 0.8 N•m)
Construction
Terminal block
DC Power input
Approx. 2 W
DC powered
2000 V AC @1 minute
Dielectric strength (input to output to power to ground)
Performance
Housing material
Flame-resistant resin (black)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
DIN rail
Operating humidity
0 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Power LED
Green light turns on when the power is supplied.
Screw terminal
Nickel-plated steel
Span adjustment
98 to 102 % (front)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
80 g (2.8 oz)
Zero adjustment
-2 to +2 % (front)
Features
- Applicable to smart transmitters
- CE marking for 24 V power
- Fast response type available
- High-density mounting
- Isolation between the input and output
- Power LED
- Powering a 4 – 20 mA DC current loop
Datasheet
Extracted Text
MODEL: M5DY Super-mini Terminal Block Signal Conditioners M5-UNIT 0: Specify voltage (See OUTPUT SPECIFICATIONS) 01: Specify voltage (See OUTPUT SPECIFICATIONS) (CE not available) CURRENT LOOP SUPPLY Functions & Features [2] POWER INPUT • Powering a 4 – 20 mA DC current loop AC Power • Applicable to smart transmitters M: 85 – 264 V AC (Operational voltage range 85 – 264 V, • Isolation between the input and output 47 –66 Hz) • Fast response type available (CE not available) • High-density mounting DC Power • Power LED R: 24 V DC • CE marking for 24 V power (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) 25 (.98) [3] OPTIONS RESPONSE TIME (0 – 90 %) 97 blank: Standard (≤ 0.5 sec.) (3.82) /K: Fast Response (Approx. 25 msec.) OTHER OPTIONS blank: none 41 (1.61) mm (inch) /Q: Option other than the above (specify the specification) OPTION SPECIFICATIONS OF /Q (multiple selections) M5DY-❑-❑❑ COATING (For the detail, refer to M-system's web site.) /C01: Silicone coating ORDERING INFORMATION /C02: Polyurethane coating Specify a code from below for each [1] through [3]. /C03: Rubber coating • Code number: M5DY-[1]-[2][3] ADJUSTMENT (e.g. M5DY-A-R/K/Q) /V01: Multi-turn fine adjuster Specify variables. • Special output range (For codes Z & 0) GENERAL SPECIFICATIONS • Specify the specification for option code /Q Construction: Terminal block (e.g. /C01 /V01) Connection: M3.5 screw terminals (torque 0.8 N·m) Screw terminal: Nickel-plated steel INPUT Housing material: Flame-resistant resin (black) Current Isolation: Input to output to power 4 – 20 mA DC (Input resistance 249.5 Ω) Zero adjustment: -2 to +2 % (front) Span adjustment: 98 to 102 % (front) Power LED: Green light turns on when the power is supplied. [1] OUTPUT Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) SUPPLY OUTPUT D: 0 – 20 mA DC (Load resistance 550 Ω max.) (across the terminals 3 – 4) Z: Specify current (See OUTPUT SPECIFICATIONS) Output voltage: 24 – 28 V DC with no load Voltage 18 V DC min. at 20 mA 1: 0 – 10 mV DC (Load resistance 100 kΩ min.) Current rating: 22 mA DC max. (CE not available) • Shortcircuit Protection 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) Current limited: 30 mA max. (CE not available) Protected time duration: No limit 3: 0 – 1 V DC (Load resistance 100 Ω min.) 4: 0 – 10 V DC (Load resistance 1000 Ω min.) 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) http://www.m-system.co.jp/ M5DY SPECIFICATIONS ES-2476 Rev.6 Page 1/4 MODEL: M5DY INPUT SPECIFICATIONS • DC Current: Input resistor incorporated OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 11 V max. • DC Voltage Output code 0 (CE) Voltage range: 0 – 10 V DC Minimum span: 1 V Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; at ≥1 V Output code 01 (Not CE) Voltage range: 0 – 1 V DC Minimum span: 10 mV Offset: Max. 1.5 times span Load resistance: Min. 100 kΩ INSTALLATION Power Consumption •AC Power input: Approx. 3 VA •DC Power input: Approx. 2 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 0 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 80 g (2.8 oz) PERFORMANCE in percentage of span Acuuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength (input to output to power to ground) DC powered: 2000 V AC @1 minute AC powered: 1500 V AC @1 minute STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) http://www.m-system.co.jp/ M5DY SPECIFICATIONS ES-2476 Rev.6 Page 2/4 MODEL: M5DY FRONT VIEW 1 2 Power LED 3 4 Span Adj. Zero Adj. 5 6 7 8 DIMENSIONS unit: mm (inch) 7.3 (.29) 8–M3.5 SCREW 1 2 DIN RAIL 3 4 35mm wide 5 6 7 8 25 (.98) 41 (1.61) [3.3 (.13)] • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM 2-WIRE TRANSMITTER Shortcircuit 24V DC + + 3 Protection Supply – – 4 Z S Isolation Low Drift Output + + 1 5 Amplifier Driver MONITOR V OUTPUT (1 – 5V DC) – 2 6 – 249.5Ω POWER LED 7 U(+) POWER 8 V(–) � When Used as DC Supply � When Used as Isolator + + + 3 + 3 2-WIRE XMTR – – – 4 4 + 1 + 1 INPUT – – 2 2 249.5Ω 249.5Ω http://www.m-system.co.jp/ M5DY SPECIFICATIONS ES-2476 Rev.6 Page 3/4 3 (.12) 94 (3.70) 35.4 (1.39) MODEL: M5DY Specifications are subject to change without notice. http://www.m-system.co.jp/ M5DY SPECIFICATIONS ES-2476 Rev.6 Page 4/4
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M5DY?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods