Manufacturers
M-SYSTEMS M3SMS
Description
M-Systems M3SMS M3S-UNIT Series Space-saving Signal Conditioner; Potentiometer Transmitter
Part Number
M3SMS
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Accuracy
±0.1 %
Applicable wire size
0.2 to 2.5 mm2
Connection
Removable terminal block
Construction
Small-sized front terminal structure
Dielectric strength
2000 V AC @1 minute (input to output to power to ground)
Housing material
Flame-resistant resin (gray)
Insulation resistance
Greater than or equal to 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-10 to +55°C (14 to 131°F)
Over-range output
Approx. -10 to +120 % at 1 – 5 V
Power Consumption AC
Approx. 2 VA at 100 V; Approx. 3 VA at 200 V; Approx. 4 VA at 264V
Power Consumption DC
Approx. 1 W
Power LED
Green light turns on when the power is supplied.
Span adjustment
70 – 100 % of total resistance (front)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
100 g (3.53 oz)
Zero adjustment
0 – 30 % of total resistance (front)
Features
- CE marking
- Constant voltage excitation
- Fast response type available
- High-density mounting
- Power indicator LED
- Provides a standard DC output proportional to a potentiometer or slide-wire position input
- Universal AC/DC power input
Datasheet
Extracted Text
MODEL: M3SMS 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) Super-space-saving Signal Conditioners 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) M3S-UNIT Series 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) POTENTIOMETER TRANSMITTER 5: 0 – 5 V DC (Load resistance 5000 Ω min.) Functions & Features 6: 1 – 5 V DC (Load resistance 5000 Ω min.) • Provides a standard DC output proportional to a 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) potentiometer or slidewire position input 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) • Constant voltage excitation 0: Specify voltage (See OUTPUT SPECIFICATIONS) • Universal AC/DC power input • Fast response type available [2] POWER INPUT • High-density mounting AC Power • Power indicator LED M2: 100 – 240 V AC (Operational voltage range 90 – 264 V, • CE marking 47 – 66 Hz) Typical Applications DC Power • Tank levels R: 24 V DC • Positions (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Universal 12 (.47) AD: 100 – 240 V AC / 24 – 240 V DC (universal) (Operational voltage range 90 - 264 V AC, 47 - 66 Hz / 21.6 - 264 V DC, ripple 10 %p-p max.) 106 (4.17) [3] OPTIONS RESPONSE TIME (0 – 90 %) blank: Standard (≤ 0.5 sec.) 110.5 (4.35) /K: Fast Response (Approx. 25 msec.) mm (inch) GENERAL SPECIFICATIONS MODEL: M3SMS–[1]–[2][3] Construction: Small-sized front terminal structure Connection: Removable terminal block ORDERING INFORMATION Applicable wire size: 0.2 to 2.5 mm2 • Code number: M3SMS-[1]-[2][3] Housing material: Flame-resistant resin (gray) Specify a code from below for each [1] through [3]. Isolation: Input to output to power (e.g. M3SMS-A-R/K) Overrange output: Approx. -10 to +120 % at 1 – 5 V • Special output range (For codes Z & 0) Zero adjustment: 0 – 30 % of total resistance (front) Span adjustment: 70 – 100 % of total resistance (front) Power LED: Green light turns on when the power is supplied. INPUT Total resistance 100 Ω – 10 kΩ INPUT SPECIFICATIONS Minimum span: 70 % of total resistance [1] OUTPUT Excitation: 0.5 V DC Current A: 4 – 20 mA DC (Load resistance 550 Ω max.) B: 2 – 10 mA DC (Load resistance 1100 Ω max.) OUTPUT SPECIFICATIONS C: 1 – 5 mA DC (Load resistance 2200 Ω max.) • DC Current: 0 – 20 mA DC D: 0 – 20 mA DC (Load resistance 550 Ω max.) Minimum span: 1 mA E: 0 – 16 mA DC (Load resistance 680 Ω max.) Offset: Max. 1.5 times span F: 0 – 10 mA DC (Load resistance 1100 Ω max.) Load resistance: Output drive 11 V max. G: 0 – 1 mA DC (Load resistance 11 kΩ max.) • DC Voltage: -10 – +11 V DC Z: Specify current (See OUTPUT SPECIFICATIONS) Minimum span: 5 mV Voltage Offset: Max. 1.5 times span http://www.m-system.co.jp/ M3SMS SPECIFICATIONS ES-7715 Rev.3 Page 1/3 MODEL: M3SMS Load resistance: Output drive 1 mA maximum; at ≥ 0.5 V INSTALLATION Power Consumption •AC: Approx. 2 VA at 100 V Approx. 3 VA at 200 V Approx. 4 VA at 264 V •DC: Approx. 1 W Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: DIN rail Weight: 100 g (3.53 oz) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EMI EN 61000-6-4: 2007 EMS EN 61000-6-2: 2005 Low Voltage Directive (2006/95/EC) EN 61010-1: 2001 Installation Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) EXTERNAL VIEW Power LED Zero Adj. Span Adj. 1 2 3 4 http://www.m-system.co.jp/ M3SMS SPECIFICATIONS ES-7715 Rev.3 Page 2/3 MODEL: M3SMS EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 7 8 5 6 DIN RAIL 35mm wide 1 2 3 4 12 110.5 (4.35) [5 (.20)] (.47) • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM POTENTIOMETER max. Excitation Volt. 3 + 1 Z S Isolation Generator Low Drift Output 2 4 5 + Amplifier Driver OUTPUT 1 – 3 6 – min. POWER LED 2 7 U(+) POWER 8 V(–) Terminal Block Specifications are subject to change without notice. http://www.m-system.co.jp/ M3SMS SPECIFICATIONS ES-7715 Rev.3 Page 3/3 106 (4.17) 62 (2.44)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M3SMS?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods