Model MODEL: M2XU Z1: Range 0 – 50 mA DC (Input resistance 100 Ω) Super-mini Signal Conditioners Mini-M Series Voltage S1: Range -1 – +1 V DC (Input resistance 1 MΩ min.) UNIVERSAL TRANSMITTER S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.) (PC programmable) Thermocouple Functions & Features T1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F) • Accepts direct inputs from various sensors and provides a T2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F) standard process signal T3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F) • I/O types and calibration ranges are fully programmable T4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F) via a PC T5: T (CC) (Usable range -270 to +400°C, -454 to +752°F) • Linearization up to 100 points can be programmed T6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F) for DC and potentiometer inputs T7: R (Usable range -50 to +1760°C, -58 to +3200°F) • Isolation between input – output – power T8: S (Usable range -50 to +1760°C, -58 to +3200°F) • CE marking T9: C(WRe 5-26) (Usable range 0 to 2315°C, 32 to 4199°F) • UL approval TN: N (Usable range -270 to +1300°C, -454 to +2372°F) TU: U (Usable range -200 to +400°C, -328 to +752°F) Typical Applications TL: L (Usable range -200 to +900°C, -328 to +1652°F) • Signal conversion between control room and field TP: Platinel Ⅱ(Usable range 0 to 1395°C, 32 to 2543°F) instrumentation with isolation T0: Specify (Please provide an emf table.) • Ideal for use as a fast solution, multifunctional spare part RTD (2- or 3-wire) 23 (.91) R1: JPt 100 (JIS'89) (Usable range: -200 to +500°C, -328 to +932°F) R3: Pt 100 (JIS'89) 76 (Usable range: -200 to +850°C, -328 to +1562°F) (2.99) R4: Pt 100 (JIS'97, IEC) (Usable range: -200 to +850°C, -328 to +1562°F) R5: Pt 50 Ω (JIS'81) 124 (4.88) (Usable range: -200 to +649 °C, -328 to +1200°F) mm (inch) R6: Ni 508.4 Ω (Usable range: -50 to +200°C, -58 to +392°F) R7: Pt 1000 MODEL: M2XU–[1][2]–[3][4] (Usable range: -200 to +200°C, -328 to +392°F) R8: Ni 100 (100 Ω @ 0℃) ORDERING INFORMATION (Usable range: -50 to +200°C, -58 to +392°F) • Code number: M2XU-[1][2]-[3][4] R9: Cu 10 (10 Ω @25°C) Specify a code from below for each [1] through [4]. (Usable range: -50 to +200°C, -58 to +392°F) (e.g. M2XU-00-R/CE/Q) R0: Specify (Please provide a resistance table.) • Specify the specification for option code /Q Potentiometer (e.g. /C01/S01) M: Total resistance 100 Ω – 10 kΩ Non-specified orders will be shipped at default factory [2] OUTPUT settings (M2XU-00: 4 – 20 mA input/4 – 20 mA output). 0: User-calibrated (Factory default: 4 – 20 mA DC) However, the power suffix code must be specified. If the unit is to be factory-calibrated to a specific If you specify full code numbers without specific calibration output type, please select from the following: ranges, default settings will be used. Current Z1: Range 0 – 20 mA DC [1] INPUT Voltage 0: User-calibrated (Factory default: 4 – 20 mA DC) V1: Range -2.5 – +2.5 V DC If the unit is to be factory-calibrated to a specific V2: Range -10 – +10 V DC input type, please select from the following: Current http://www.m-system.co.jp/ M2XU SPECIFICATIONS ES-5008 Rev.12 Page 1/6 MODEL: M2XU -15 – +115 % for both input and output) [3] POWER INPUT · User’s TC/RTD table AC Power Burnout (T/C, RTD and Pot.): Upscale standard; downscale M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, or no burnout options are PC programmable 47 – 66 Hz) Linearization (T/C, RTD input): Standard tables stored in (90 – 264 V for UL) memory DC Power Cold junction compensation (T/C): CJC sensor (included) to R: 24 V DC be attached to the input terminals (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Status indicator LED: Flashing patterns indicate different P: 110 V DC operating status of the transmitter. (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) Configurator connection: 2.5 dia. miniature jack; (110 V ±10 % for UL) RS-232C level [4] OPTIONS (multiple selections) INPUT SPECIFICATIONS STANDARDS & APPROVALS (must be specified) • DC Current: Shunt resistor attached to the input terminals /N: Without CE or UL (0.5 W) /CE: CE marking Operational range: 0 – 70 mA DC with 100 Ω, 0.5 W /UL: UL approval (CE marking) Input range: 0 – 50 mA DC OTHER OPTIONS Minimum span: 2 mA blank: none Offset: Lower range can be any specific value within the /Q: Option other than the above (specify the specification) input range provided that the minimum span is maintained. (UL not available) If not specified, the input range is 4 – 20 mA DC. • DC Voltage SPECIFICATIONS OF OPTION: Q (multiple selections) Operational range: -11.5 – +11.5 V DC COATING (For the detail, refer to M-System's web site.) Input range: -10 – +10 V DC /C01: Silicone coating Minimum span: 10 mV for S1; 100 mV for S2 /C02: Polyurethane coating Offset: Lower range can be any specific value within the /C03: Rubber coating input range provided that the minimum span is maintained. TERMINAL SCREW MATERIAL If not specified, the input range is shown below. /S01: Stainless steel S1: 0 – 100 mV DC S2: 1 – 5 V DC • THERMOCOUPLE RELATED PRODUCTS For T/C types K, E, T, B, R, S or N, the accuracy in the • JX configurator connection kit (model: JXCON) temperature ranges near the lower limit may be out of the described value. Consult M-System for more detail. GENERAL SPECIFICATIONS Input resistance: 1 MΩ min. Construction: Plug-in Burnout sensing: 45 nA ±10 % Connection: M3 screw terminals (torque 0.8 N·m) Offset: Lower range can be any specific value within the Housing material: Flame-resistant resin (black) input range provided that the minimum span is maintained. Isolation: Input to output to power If not specified, the input range is shown below. Overrange output: Approx. -15 to +115 % T1 PR : 0 – 1600°C (Negative current output is not provided.) T2 K : 0 – 1000°C Manual zero adjustments: -5 to +5 % T3 E : 0 – 500°C (factory setting: 0 %) T4 J: 0 – 500°C Manual span adjustments: 95 to 105 % T5 T: 0 – 300°C (factory setting: 100 %) T6 B: 0 – 1800°C Programming: PC programmable features include: T7 R: 0 – 1600°C · T/C and RTD type and temp. range T8 S: 0 – 1600°C · Input and output ranges T9 C (WRe 5 - 26) : 0 – 2000°C · Zero and span adjustments TN N : 0 – 1000°C · Simulated output TU U : 0 – 300°C · User's linearization table (max. 100 points, specified within TL L : 0 – 500°C http://www.m-system.co.jp/ M2XU SPECIFICATIONS ES-5008 Rev.12 Page 2/6 MODEL: M2XU TP Platinel II : 0 – 1200°C INSTALLATION • RTD: 2- or 3-wire RTD Power Consumption Maximum leadwire resistance: 200 Ω per wire (3 -wire) •AC Power input: Approx. 6 VA Sensing current: ≤ 1.0 mA •DC Power input: Approx. 3 W If not specified, the input range is shown below. Operating temperature: -30 to +60°C (-22 to +140°F) R1: JPt 100 0 – 100°C Operating humidity: 30 to 90 %RH (non-condensing) R3: Pt 100 0 – 100°C Mounting: Surface or DIN rail R4: Pt 100 0 – 100°C Weight: 120 g (0.26 lbs) R5: Pt 50 Ω 0 – 200°C R6: Ni 508.4 Ω 0 – 100°C PERFORMANCE R7: Pt 1000 0 – 100°C Accuracy: Input accuracy + output accuracy R8: Ni 100 0 – 100°C Input accuracy (% of input range) R9: Cu 10 0 – 100°C Inversely proportional to span. • POTENTIOMETER: 100 Ω – 10 kΩ (DC) -1 – +1 V : ±0.02 Minimum span: -10 – +10 V : ±0.02 (Range) 0 – 100 Ω : 2.5 Ω 0 – 50 mA : ±0.02 0 – 300 Ω : 3.0 Ω Except the input resistor error. 0 – 1000 Ω : 10 Ω (T/C) (PR) : ±0.08 0 – 10 kΩ : 10 Ω K (CA) : ±0.02 Excitation: ≤ 0.5 V DC at 1000 Ω E (CRC) : ±0.02 If not specified, the input range is 0 – 1000 Ω. J (IC) : ±0.04 T (CC) : ±0.06 OUTPUT SPECIFICATIONS B (RH) : ±0.12 • DC Current R : ±0.08 Operational range: 0 – 24 mA DC S : ±0.08 Output range: 0 – 20 mA DC C (WRe 5 - 26) : ±0.04 Minimum span: 1 mA N : ±0.04 Offset: Lower range can be any specific value within the U : ±0.04 output range provided that the minimum span is L : ±0.04 maintained. P (Platinel II) : ±0.04 Load resistance: Output drive 15 V max. (RTD) JPt 100 (JIS ’89) : ±0.04 (e.g. 4 – 20 mA: 750 Ω [15 V / 20 mA]) Pt 100 (JIS ’89) : ±0.03 If not specified, the output range is 4 – 20 mA DC. Pt 100 (JIS ’97, IEC) : ±0.03 • DC VOLTAGE Pt 50 Ω (JIS ’81) : ±0.04 Code V1 (narrow spans) Ni 508.4 Ω : ±0.05 Operational range: -3 – +3 V DC Pt 1000 : ±0.08 Output range: -2.5 – +2.5 V DC Ni 100 : ±0.14 Minimum span: 250 mV Cu 10 : ±0.6 Code V2 (wide spans) (Pot.) 0 – 100 Ω : ±0.08 Operational range: -11.5 – +11.5 V DC 0 – 300 Ω : ±0.04 Output range: -10 – +10 V DC 0 – 1000 Ω : ±0.04 Minimum span: 1 V 0 – 10 kΩ : ±0.04 Offset: Lower range can be any specific value within the Output accuracy: ±0.02 % of output range output range provided that the minimum span is Inversely proportional to span. maintained. Cold junction compensation error: Load resistance: Output drive 1 mA max. ±0.4°C or ±0.7°F (at 20°C ±10°C or 68°F ±18°F) (e.g. 1 – 5 V: 5000 Ω [5 V / 1 mA]) Temp. coefficient If not specified, the output range is shown below. (at -5 to +55°C [23 to 131°F] of I/O range) V1: 0 – 1 V DC Input: ±0.016 %/°C (±0.009 %/°F) with current V2: 1 – 5 V DC ±0.004 %/°C (±0.002 %/°F) with voltage ±0.004 %/°C (±0.002 %/°F) with T/C ±0.004 %/°C (±0.002 %/°F) with RTD http://www.m-system.co.jp/ M2XU SPECIFICATIONS ES-5008 Rev.12 Page 3/6 MODEL: M2XU ±0.004 %/°C (±0.002 %/°F) with Pot. Output: ±0.013 %/°C (±0.007 %/°F) Response time: ≤ 0.5 sec.(0 – 90 %) with current ≤ 0.5 sec.(0 – 90 %) with voltage ≤ 1.5 sec.(0 – 90 %) with T/C ≤ 0.9 sec.(0 – 90 %) with RTD ≤ 0.9 sec. (0 – 90 %) with Pot. Burnout response: ≤ 10 sec. Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) CALCULATION EXAMPLES OF OVERALL ACCURACY [Example] Input Type -10 – +10 V, Input Range 1 – 5 V, Output Type 0 – 20 mA, Output Range 0 – 10 mA Max. Input Range (20 V) / Span (4 V) × 0.02 % = 0.1 % Max. Output Range (20 mA) / Span (10 mA) × 0.02 % = 0.04 % Overall accuracy = 0.1 + 0.04 = ±0.14 % STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) Low Voltage Directive (2006/95/EC) EN 61010-1 Installation Category II Pollution Degree 2 Max. operating voltage 300 V Input or output to power: Reinforced insulation Input to output: Basic insulation Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (UL 1604, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010B-1, CAN/CSA-C22.2 No.1010-1) EXTERNAL VIEW � FRONT VIEW (with cover open) � RIGHT SIDE VIEW Configurator Jack Input Range Selector Status Indicator LED Position H: code S2, Z1 Position L : other Zero/Span Selector Top: SPAN Middle: OFF Bottom: ZERO UP/DOWN Switches The front cover cannot be opened to 180 deg. when flush with neighboring units. http://www.m-system.co.jp/ M2XU SPECIFICATIONS ES-5008 Rev.12 Page 4/6 MODEL: M2XU Refer to the instruction manual for detailed procedures. DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 7.3 (.29) 86.7 (3.41) 15 (.59) 116.7 (4.59) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) Use the input resistor (model: REM2) for a DC current input, and the CJC sensor (model: CJM) for a thermocouple input, both included in the package. INPUT RESISTOR CJC SENSOR (model: REM2) (model: CJM) black red 4 1 4 1 1 8 5 8 5 12 9 12 9 14 13 14 13 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM STATUS DC T/C RTD POT. INPUT RANGE ZERO/SPAN ext. wire SELECTOR SELECTOR Isolation + max. + + + Digital Output + A 3 1 9 – * Computation Driver R – Low Drift OUTPUT Amplifier – CJC B 2 4 UP/DOWN 12 – SWITCHES SENSOR & Burnout red (model: CJM) B 1 5 13 U(+) – min. POWER black 8 14 V(–) CONFIGURATOR JACK Base Socket *Input shunt resistor attached for current input. http://www.m-system.co.jp/ M2XU SPECIFICATIONS ES-5008 Rev.12 Page 5/6 70.5 (2.78) 19 (.75) 14 (.55) 59 (2.32) 4 (.16) 72 (2.83) MODEL: M2XU Specifications are subject to change without notice. http://www.m-system.co.jp/ M2XU SPECIFICATIONS ES-5008 Rev.12 Page 6/6