Manufacturers
M-SYSTEMS M2VF2
Description
M-Systems M2VF2 Signal Transmitter (Ultra-High Speed Response 30µsec)
Part Number
M2VF2
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Connection
M3 screw terminals (torque 0.8 N·m)
Housing material
Flame-resistant resin (black)
Isolation
Input to output to power
Overrange output
Approx. -10 to +120 % at 1 – 5 V
Span adjustment
95 to 105 % (front) (98 to 102 % with the output suffix codes 4W and 5W selected.)
Zero adjustment
-5 to +5 % (front) (±2 % with the output suffix codes 4W and 5W selected)
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval (selected models)
- Fixed range or PC programmable models selectable
- M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
- Selectable 100-240V AC/24V DC power input
- Standard DIN rail or surface mounting
Datasheet
Extracted Text
Model ZERO SPAN MODEL: M2VF2 4: 0 – 10 V DC (Input resistance 1 MΩ min.) Super-mini Signal Conditioners Mini-M Series 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) SIGNAL TRANSMITTER 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) (ultra-high speed response 30 μsec.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) Functions & Features (Select ‘/N’ for ‘Standards & Approvals’ code.) • Converts DC input from a sensor into a standard process 01: Specify voltage (See INPUT SPECIFICATIONS) signal (Select ‘/CE’ or ‘/UL’ for ‘Standards & Approvals’ code.) • 30-microsecond response • CE marking [2] OUTPUT • UL approval Current A: 4 – 20 mA DC (Load resistance 600 Ω max.) Typical Applications D: 0 – 20 mA DC (Load resistance 600 Ω max.) • Isolation for a vibration analyzing system E: 0 – 16 mA DC (Load resistance 750 Ω max.) Voltage 23 (.91) 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 200 Ω min.) 76 (2.99) 4: 0 – 10 V DC (Load resistance 2000 Ω min.) 5: 0 – 5 V DC (Load resistance 1000 Ω min.) 6: 1 – 5 V DC (Load resistance 1000 Ω min.) 124 4W: -10 – +10 V DC (Load resistance 2000 Ω min.) (4.88) 5W: -5 – +5 V DC (Load resistance 1000 Ω min.) mm (inch) [3] POWER INPUT MODEL: M2VF2–[1][2]–[3][4] AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, ORDERING INFORMATION 47 – 66 Hz) • Code number: M2VF2-[1][2]-[3][4] (Select ‘/N’ for ‘Standards & Approvals’ code.) Specify a code from below for each [1] through [4]. M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, (e.g. M2VF2-4W4W-R/CE/Q) 47 – 66 Hz) • Special input range (For codes Z & 0) (90 – 264 V for UL) • Specify the specification for option code /Q DC Power (e.g. /C01/S01) R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) R2: 11 – 27 V DC [1] INPUT (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) Current (Select ‘/N’ for ‘Standards & Approvals’ code.) A: 4 – 20 mA DC (Input resistance 250 Ω) P: 110 V DC B: 2 – 10 mA DC (Input resistance 500 Ω) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) C: 1 – 5 mA DC (Input resistance 1000 Ω) (110 V ±10 % for UL) D: 0 – 20 mA DC (Input resistance 50 Ω) E: 0 – 16 mA DC (Input resistance 62.5 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) [4] OPTIONS (multiple selections) G: 0 – 1 mA DC (Input resistance 1000 Ω) STANDARDS & APPROVALS (must be specified) H: 10 – 50 mA DC (Input resistance 100 Ω) /N: Without CE or UL GW: -1 – +1 mA DC (Input resistance 1000 Ω) /CE: CE marking FW: -10 – +10 mA DC (Input resistance 100 Ω) /UL: UL approval (CE marking) Z: Specify current (See INPUT SPECIFICATIONS) OTHER OPTIONS Voltage blank: none 3: 0 – 1 V DC (Input resistance 1 MΩ min.) /Q: Option other than the above (specify the specification) http://www.m-system.co.jp/ M2VF2 SPECIFICATIONS ES-5055 Rev.6 Page 1/3 MODEL: M2VF2 (UL not available) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.02 %/°C (±0.01 %/°F) SPECIFICATIONS OF OPTION: Q (multiple selections) Frequency characteristics: 15 kHz, -3 dB COATING (For the detail, refer to M-System's web site.) Response time: ≤ 30 µsec. (0 – 90 %) /C01: Silicone coating (except the user specified ranges) /C02: Polyurethane coating Line voltage effect: ±0.1 % over voltage range /C03: Rubber coating Insulation resistance: ≥ 100 MΩ with 500 V DC TERMINAL SCREW MATERIAL Dielectric strength: 2000 V AC @1 minute (input to output /S01: Stainless steel to power to ground) GENERAL SPECIFICATIONS STANDARDS & APPROVALS Construction: Plug-in CE conformity: Connection: M3 screw terminals (torque 0.8 N·m) EMC Directive (2004/108/EC) Housing material: Flame-resistant resin (black) EN 61000-6-4 (EMI) Isolation: Input to output to power EN 61000-6-2 (EMS) Overrange output: Approx. -10 to +120 % at 1 – 5 V Low Voltage Directive (2006/95/EC) Zero adjustment: -5 to +5 % (front) EN 61010-1 (±2 % with the output suffix codes 4W and 5W selected) Installation Category II Span adjustment: 95 to 105 % (front) Pollution Degree 2 (98 to 102 % with the output suffix codes 4W and 5W Max. operating voltage 300 V selected.) Input or output to power: Reinforced insulation Input to output: Basic insulation INPUT SPECIFICATIONS Approval: • DC Current: UL/C-UL nonincendive Class I, Division 2, Shunt resistor attached to the input terminals (0.5 W) Groups A, B, C, and D hazardous locations Specify input resistance value for code Z. (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) • DC Voltage: -300 – +300 V DC UL/C-UL general safety requirements (-30 – +30 V for the input code 01. Span 30 V max.) (UL 61010B-1, CAN/CSA-C22.2 No.1010-1) Minimum span: 1 V Offset: Max. 1.5 times span Input resistance: ≥ 1 MΩ OUTPUT SPECIFICATIONS • DC Current Parallel load capacitance: Max. 2000 pF INSTALLATION Power Consumption •AC Power input: Approx. 4 VA at 100 V Approx. 5 VA at 200 V Approx. 6 VA at 264 V •DC Power input: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lbs) http://www.m-system.co.jp/ M2VF2 SPECIFICATIONS ES-5055 Rev.6 Page 2/3 MODEL: M2VF2 DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) INPUT RESISTOR (model: REM2) 4 1 8 5 12 9 14 13 Input shunt resistor attached for current input. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 1 9 + * Amplifier Driver SIGNAL SOURCE R OUTPUT – 4 12 – 5 13 U(+) POWER 8 14 V(–) Base Socket *Input shunt resistor attached for current input. The M2VF2, by its fast-response feature, is not designed to eliminate noise present in the input signal. Use a shielded twisted-pair cable to prevent noise from entering through the input wiring. The described response time may not be assured with the current output when the cable's line capacitance is greater than 2000 pF. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2VF2 SPECIFICATIONS ES-5055 Rev.6 Page 3/3 70.5 (2.78) 19 (.75) 59 (2.32) 4 (.16) 72 (2.83)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M2VF2?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods