Model ZERO SPAN MODEL: M2VF 4: 0 – 10 V DC (Input resistance 1 MΩ min.) Super-mini Signal Conditioners Mini-M Series 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) SIGNAL TRANSMITTER 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) (high speed response) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) Functions & Features 0: Specify voltage (See INPUT SPECIFICATIONS) • Converts DC input from a sensor into a standard (Select ‘/N’ for ‘Standards & Approvals’ code.) process signal 01: Specify voltage (See INPUT SPECIFICATIONS) • Isolation between input and output (Select ‘/CE’ or ‘/UL’ for ‘Standards & Approvals’ code.) • 180-microsecond response • CE marking [2] OUTPUT • UL approval Current A: 4 – 20 mA DC (Load resistance 750 Ω max.) Typical Applications B: 2 – 10 mA DC (Load resistance 1500 Ω max.) • Isolation for a vibration analyzing system C: 1 – 5 mA DC (Load resistance 3000 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) 23 (.91) E: 0 – 16 mA DC (Load resistance 900 Ω max.) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) 76 (2.99) FW: -10 – +10 mA DC (Load resistance 700 Ω max.) GW: -1 – +1 mA DC (Load resistance 7000 Ω max.) Z: Specify current (See OUTPUT SPECIFICATIONS) 124 Voltage (4.88) 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) mm (inch) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) MODEL: M2VF–[1][2]–[3][4] 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) ORDERING INFORMATION 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) • Code number: M2VF-[1][2]-[3][4] 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) Specify a code from below for each [1] through [4]. 0: Specify voltage (See OUTPUT SPECIFICATIONS) (e.g. M2VF-6A-M2/CE/Q) • Special input and output ranges (For codes Z & 0) • Specify the specification for option code /Q [3] POWER INPUT (e.g. /C01/S01) AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) [1] INPUT (Select ‘/N’ for ‘Standards & Approvals’ code.) Current M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, A: 4 – 20 mA DC (Input resistance 250 Ω) 47 – 66 Hz) B: 2 – 10 mA DC (Input resistance 500 Ω) (90 – 264 V for UL) C: 1 – 5 mA DC (Input resistance 1000 Ω) DC Power D: 0 – 20 mA DC (Input resistance 50 Ω) R: 24 V DC E: 0 – 16 mA DC (Input resistance 62.5 Ω) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) F: 0 – 10 mA DC (Input resistance 100 Ω) R2: 11 – 27 V DC G: 0 – 1 mA DC (Input resistance 1000 Ω) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) H: 10 – 50 mA DC (Input resistance 100 Ω) (Select ‘/N’ for ‘Standards & Approvals’ code.) GW: -1 – +1 mA DC (Input resistance 1000 Ω) P: 110 V DC FW: -10 – +10 mA DC (Input resistance 100 Ω) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) Z: Specify current (See INPUT SPECIFICATIONS) (Select ‘/N’ for ‘Standards & Approvals’ code.) Voltage 3: 0 – 1 V DC (Input resistance 1 MΩ min.) http://www.m-system.co.jp/ M2VF SPECIFICATIONS ES-5014 Rev.12 Page 1/3 MODEL: M2VF [4] OPTIONS (multiple selections) INSTALLATION STANDARDS & APPROVALS (must be specified) Power Consumption /N: Without CE or UL •AC Power input: /CE: CE marking Approx. 3 VA at 100 V /UL: UL approval (CE marking) Approx. 4 VA at 200 V OTHER OPTIONS Approx. 5 VA at 264 V blank: none •DC Power input: Approx. 3 W /Q: Option other than the above (specify the specification) Operating temperature: -5 to +55°C (23 to 131°F) (UL not available) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lbs) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating PERFORMANCE in percentage of span /C02: Polyurethane coating Accuracy: ±0.1 % /C03: Rubber coating Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) TERMINAL SCREW MATERIAL Response time: ≤ 180 μsec. (0 – 90 %) /S01: Stainless steel Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: GENERAL SPECIFICATIONS 1000 V AC @1 minute (input to output) Construction: Plug-in 2000 V AC @1 minute (input or output to power to ground) Connection: M3 screw terminals (torque 0.8 N·m) Housing material: Flame-resistant resin (black) Isolation: Input to output to power STANDARDS & APPROVALS Overrange output: Approx. -10 to +120 % at 1 – 5 V CE conformity: Zero adjustment: -5 to +5 % (front) EMC Directive (2004/108/EC) Span adjustment: 95 to 105 % (front) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) Low Voltage Directive (2006/95/EC) INPUT SPECIFICATIONS EN 61010-1 • DC Current: Installation Category II Shunt resistor attached to the input terminals (0.5 W) Pollution Degree 2 Specify input resistance value for code Z. Max. operating voltage 300 V • DC Voltage: -300 – +300 V DC Input or output to power: Reinforced insulation (-30 – +30 V for the input code 01. Span 30 V max.) Input to output: Functional insulation Minimum span: 1 V Approval: Offset: Max. 1.5 times span UL/C-UL nonincendive Class I, Division 2, Input resistance: ≥ 1 MΩ Groups A, B, C, and D hazardous locations (UL 1604, CAN/CSA-C22.2 No.213) OUTPUT SPECIFICATIONS UL/C-UL general safety requirements • DC Current: -10 – +20 mA DC (UL 61010B-1, CAN/CSA-C22.2 No.1010-1) Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max.; 7 V for bidirectional outputs • DC Voltage: -10 – +12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V http://www.m-system.co.jp/ M2VF SPECIFICATIONS ES-5014 Rev.12 Page 2/3 MODEL: M2VF DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) INPUT RESISTOR (model: REM2) 4 1 8 5 12 9 14 13 Input shunt resistor attached for current input. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 1 9 + * Amplifier Driver SIGNAL SOURCE R OUTPUT – 4 12 – 5 13 U(+) POWER 8 14 V(–) Base Socket *Input shunt resistor attached for current input. The M2VF, by its fast-response feature, is not designed to eliminate noise present in the input signal. Use a shielded twisted-pair cable for preventing noise entering through the input wiring. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2VF SPECIFICATIONS ES-5014 Rev.12 Page 3/3 70.5 (2.78) 19 (.75) 59 (2.32) 4 (.16) 72 (2.83)