Manufacturers
M-SYSTEMS M2SES2
Description
M-Systems M2SES2 Mini-M Series Super-mini Signal Conditioner; High/Low Selector (with simple loop test output)
Part Number
M2SES2
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
AC Power input
Approx. 3 VA at 100 V; Approx. 4 VA at 200 V; Approx. 5 VA at 264 V
Accuracy
±0.2 %
Connection
M3 screw terminals (torque 0.8 N•m)
Construction
Plug-in
DC Power input
Approx. 3 W
Dielectric strength
2000 V AC @1 minute (input to output to power to ground)
DIP switch setting
Selecting output options
Housing material
Flame-resistant resin (black)
Input span adjustments
98 to 102 % (front)
Input zero adjustments
-2 to +2 % (front)
Insulation resistance
Greater than 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
Surface or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Over-range output
Approx. -10 to +120 % at 1 – 5 V
Response time
Less than 0.5 sec. (0 – 90 %)
Status indicator LED 1
Green LED; indicates the transmitter’s function mode (Refer to the instruction manual.)
Status indicator LED 2
Orange LED; indicates the transmitter’s function mode (Refer to the instruction manual.)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
150 g (0.33 lbs)
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval
- Fixed range or PC programmable models selectable
- High-density mounting
- M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring
- Monitors two DC input signals and transmitting an output signal proportional to the higher or lower input
- Selectable 100-240V AC/24V DC power input
- Simple loop test output (0, 50, 100 %)
- Standard DIN rail or surface mounting
Datasheet
Extracted Text
Model STAT2 STAT1 ZERO INP2 SPAN ZERO INP1 SPAN MODEL: M2SES2 E: 0 – 16 mA DC (Load resistance 900 Ω max.) Super-mini Signal Conditioners Mini-M Series F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) HIGH/LOW SELECTOR Z: Specify current (See OUTPUT SPECIFICATIONS) (with simple loop test output) Voltage Functions & Features 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) • Monitors two DC input signals and transmitting an output 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) signal proportional to the higher or lower input 3: 0 – 1 V DC (Load resistance 1000 Ω min.) • Simple loop test output (0, 50, 100 %) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) • High-density mounting 5: 0 – 5 V DC (Load resistance 5000 Ω min.) • CE marking 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) Typical Applications 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) • Selecting greater flow, pressure, etc. for control 0: Specify voltage (See OUTPUT SPECIFICATIONS) • Heating control by multiple T/C’s on a furnace [3] POWER INPUT 23 (.91) AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) 76 (2.99) (Select ‘/N’ for ‘Standards & Approvals’ code.) M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) 124 DC Power (4.88) R: 24 V DC mm (inch) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) R2: 11 – 27 V DC MODEL: M2SES2–[1][2]–[3][4] (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) (Select ‘/N’ for ‘Standards & Approvals’ code.) P: 110 V DC ORDERING INFORMATION (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) • Code number: M2SES2-[1][2]-[3][4] Specify a code from below for [1] and [4]. (e.g. M2SES2-AA-M2/CE/Q) [4] OPTIONS (multiple selections) • Special output range (For codes Z & 0) STANDARDS & APPROVALS (must be specified) • Specify the specification for option code /Q /N: Without CE or UL (e.g. /C01/S01) /CE: CE marking OTHER OPTIONS blank: none [1] INPUT /Q: Option other than the above (specify the specification) Current A: 4 – 20 mA DC (Input resistance 250 Ω) B: 2 – 10 mA DC (Input resistance 500 Ω) SPECIFICATIONS OF OPTION: Q (multiple selections) C: 1 – 5 mA DC (Input resistance 1000 Ω) COATING (For the detail, refer to M-System's web site.) H: 10 – 50 mA DC (Input resistance 100 Ω) /C01: Silicone coating Voltage /C02: Polyurethane coating 6: 1 – 5 V DC (Input resistance 1 MΩ min.) /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel [2] OUTPUT Current A: 4 – 20 mA DC (Load resistance 750 Ω max.) GENERAL SPECIFICATIONS B: 2 – 10 mA DC (Load resistance 1500 Ω max.) Construction: Plug-in C: 1 – 5 mA DC (Load resistance 3000 Ω max.) Connection: M3 screw terminals (torque 0.8 N·m) D: 0 – 20 mA DC (Load resistance 750 Ω max.) http://www.m-system.co.jp/ M2SES2 SPECIFICATIONS ES-5098 Rev.2 Page 1/3 MODEL: M2SES2 Housing material: Flame-resistant resin (black) EN 61000-6-4 (EMI) Isolation: Input to output to power EN 61000-6-2 (EMS) Overrange output: Approx. -10 to +120 % at 1 – 5 V Low Voltage Directive (2006/95/EC) Input zero adjustments: -2 to +2 % (front) EN 61010-1 Input span adjustments: 98 to 102 % (front) Installation Category II DIP switch setting: Selecting output options Pollution Degree 2 Status indicator LED 1: Green LED; indicates the Max. operating voltage 300 V transmitter’s function mode (Refer to the instruction Input or output to power: Reinforced insulation manual.) Input to output: Basic insulation Status indicator LED 2: Orange LED; indicates the transmitter’s function mode (Refer to the instruction manual.) INPUT SPECIFICATIONS • DC Current: Input resistor incorporated OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. • DC Voltage: -10 – +12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V INSTALLATION Power Consumption •AC Power input: Approx. 3 VA at 100 V Approx. 4 VA at 200 V Approx. 5 VA at 264 V •DC Power input: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lbs) PERFORMANCE in percentage of span Accuracy: ±0.2 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) http://www.m-system.co.jp/ M2SES2 SPECIFICATIONS ES-5098 Rev.2 Page 2/3 MODEL: M2SES2 EXTERNAL VIEW � FRONT VIEW � SIDE VIEW Status Indicator LED2 Output Function Setting Status Indicator LED1 SW1 1 2 3 4 ON Zero Adj. (ZERO2) OFF Input 2 Span Adj. (SPAN2) Zero Adj. (ZERO1) Input 1 Span Adj. (SPAN1) Refer to the instruction manual for detailed procedures. DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM STATUS Z S Z S Isolation Output + 1 Selector 9 + Driver * INPUT 1 OUTPUT – 4 12 – DIP SWITCH + 5 13 U(+) * INPUT 2 POWER – 8 14 V(–) Base Socket *Input shunt resistor incorporated for current inputs. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2SES2 SPECIFICATIONS ES-5098 Rev.2 Page 3/3 70.5 (2.78) 59 (2.32) 4 (.16) 72 (2.83)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M2SES2?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods