Manufacturers
M-SYSTEMS M2SBS
Description
M-Systems M2SBS Mini-M Series Super-mini Signal Conditioner; Subtractor
Part Number
M2SBS
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
AC Power input
Approx. 3 VA at 100 V; Approx. 4 VA at 200 V; Approx. 5 VA at 264 V
Accuracy
±0.2 % (±0.4 % with either or both K1, K2 exceeding 1.00)
Connection
M3 screw terminals (torque 0.8 N•m)
Construction
Plug-in
DC Power input
Approx. 3 W
Dielectric strength
2000 V AC @1 minute (input 1 or input 2to output to power to ground)
Housing material
Flame-resistant resin (black)
Insulation resistance
Greater than 100 M Omega with 500 V DC
Isolation
Input 1 or input 2 to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
Surface or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Over-range output
0 to 120 % (approx.) at 1 – 5 V
Response time
Less than 0.5 sec. (0 – 90 %)
Span adjustment
95 to 105 % (front)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
150 g (0.33 lbs)
Zero adjustment
-5 to +5 % (front)
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval
- Fixed range or PC programmable models selectable
- M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
- Receives two DC inputs and provides an output proportional to the subtraction of the inputs
- Selectable 100-240V AC/24V DC power input
- Standard DIN rail or surface mounting
Datasheet
Extracted Text
Model ZERO SPAN MODEL: M2SBS 2: 0 – 100 mV DC (Input resistance 100 kΩ min.) Super-mini Signal Conditioners Mini-M Series 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) SUBTRACTOR 5: 0 – 5 V DC (Input resistance 1 MΩ min.) Functions & Features 6: 1 – 5 V DC (Input resistance 1 MΩ min.) • Receives two DC inputs and provides an output 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) proportional to the subtraction of the inputs 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) • CE marking 0: Specify voltage (See INPUT SPECIFICATIONS) • UL approval [2] INPUT 2 Typical Applications Same range availability as Input 1 • Calculating temperature or flow differences 23 (.91) [3] OUTPUT Current 76 A: 4 – 20 mA DC (Load resistance 750 Ω max.) (2.99) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) 124 (4.88) E: 0 – 16 mA DC (Load resistance 900 Ω max.) mm (inch) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Z: Specify current (See OUTPUT SPECIFICATIONS) MODEL: M2SBS-[1][2][3]-[4][5] Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) ORDERING INFORMATION 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) • Code number: M2SBS-[1][2][3]-[4][5] 3: 0 – 1 V DC (Load resistance 1000 Ω min.) Specify a code from below for each [1] through [5]. 4: 0 – 10 V DC (Load resistance 10 kΩ min.) (e.g. M2SBS-6AA-M2/CE/Q) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) • Ratios (e.g. K1 = 2.00, K2 = 0.10) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) • Special input and output ranges (For codes Z&0) 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) • Specify the specification for option code /Q 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) (e.g. /C01/S01) 0: Specify voltage (See OUTPUT SPECIFICATIONS) [1] INPUT 1 [4] POWER INPUT Current AC Power A: 4 – 20 mA DC (Input resistance 250 Ω) M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, A1: 4 – 20 mA DC (Input resistance 50 Ω) 47 – 66 Hz) B: 2 – 10 mA DC (Input resistance 500 Ω) (90 – 264 V for UL) C: 1 – 5 mA DC (Input resistance 1000 Ω) DC Power D: 0 – 20 mA DC (Input resistance 50 Ω) R: 24 V DC E: 0 – 16 mA DC (Input resistance 62.5 Ω) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) F: 0 – 10 mA DC (Input resistance 100 Ω) R2: 11 – 27 V DC G: 0 – 1 mA DC (Input resistance 1000 Ω) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) H: 10 – 50 mA DC (Input resistance 100 Ω) (Select ‘/N’ for ‘Standards & Approvals’ code.) J: 0 – 10 μA DC (Input resistance 1000 Ω) P: 110 V DC K: 0 – 100 μA DC (Input resistance 1000 Ω) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) GW: -1 – +1 mA DC (Input resistance 1000 Ω) (110 V ±10 % for UL) FW: -10 – +10 mA DC (Input resistance 100 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) http://www.m-system.co.jp/ M2SBS SPECIFICATIONS ES-5089 Rev.10 Page 1/3 MODEL: M2SBS [5] OPTIONS (multiple selections) OUTPUT SPECIFICATIONS STANDARDS & APPROVALS (must be specified) • DC Current: 0 – 20 mA DC /N: Without CE or UL Minimum span: 1 mA /CE: CE marking Offset: Max. 1.5 times span /UL: UL approval (CE marking) Load resistance: Output drive 15 V max. OTHER OPTIONS • DC Voltage: -10 – +12 V DC blank: none Minimum span: 5 mV /Q: Option other than the above (specify the specification) Offset: Max. 1.5 times span (UL not available) Load resistance: Output drive 1 mA max.; at ≥ 0.5 V SPECIFICATIONS OF OPTION: Q (multiple selections) INSTALLATION COATING (For the detail, refer to M-System's web site.) Power Consumption /C01: Silicone coating •AC Power input: /C02: Polyurethane coating Approx. 3 VA at 100 V /C03: Rubber coating Approx. 4 VA at 200 V TERMINAL SCREW MATERIAL Approx. 5 VA at 264 V /S01: Stainless steel •DC Power input: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) GENERAL SPECIFICATIONS Mounting: Surface or DIN rail Construction: Plug-in Weight: 150 g (0.33 lbs) Connection: M3 screw terminals (torque 0.8 N·m) Housing material: Flame-resistant resin (black) Isolation: Input 1 or input 2 to output to power PERFORMANCE in percentage of span (Negative sides of the input 1 and 2 must be of the same Accuracy: ±0.2 % (±0.4 % with either or both K1, K2 potential.) exceeding 1.00) Overrange output: 0 to 120 % (approx.) at 1 – 5 V Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Zero adjustment: -5 to +5 % (front) Response time: ≤ 0.5 sec. (0 – 90 %) Span adjustment: 95 to 105 % (front) Line voltage effect: ±0.1 % over voltage range Equation: Output = K1 × Input 1 – K2 × Input 2 Insulation resistance: ≥ 100 MΩ with 500 V DC (K1 × Input 1 > K2 × Input 2) Dielectric strength: 2000 V AC @1 minute (input 1 or input 2 K1: 0.40 to 2.00 specified when ordering to output to power to ground) K2: 0.10 to 2.00 specified when ordering Input 1, Input 2: 0 to 120% STANDARDS & APPROVALS Forcibly limited to 0% and 120% respectively when the CE conformity: signal is out of range. EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) INPUT SPECIFICATIONS EN 61000-6-2 (EMS) • DC Current: Input resistor incorporated Low Voltage Directive (2006/95/EC) Specify input resistance value for code Z. EN 61010-1 (R ≤ 0.25 W ÷ [F.S. Current]2) Installation Category II • DC Voltage: -300 – +300 V DC Pollution Degree 2 Minimum span: 3 mV Max. operating voltage 300 V Offset: Max. 1.5 times span Input 1 or input 2 or output to power: Reinforced insulation Input resistance Input 1 or input 2 to output: Basic insulation Span 3 – 10 mV : ≥ 10 kΩ Approval: Span 10 – 100 mV : ≥ 10 kΩ UL/C-UL nonincendive Class I, Division 2, Span 0.1 – 1 V : ≥ 100 kΩ Groups A, B, C, and D hazardous locations Span ≥ 1 V : ≥ 1 MΩ (UL 1604, CAN/CSA-C22.2 No.213) UL/C-UL general safety requirements (UL 61010B-1, CAN/CSA-C22.2 No.1010-1) http://www.m-system.co.jp/ M2SBS SPECIFICATIONS ES-5089 Rev.10 Page 2/3 MODEL: M2SBS DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Digital Output + + 1 9 Amplifier Computation Driver * INPUT 1 OUTPUT – – 4 12 Low Drift + U(+) 5 13 Amplifier * INPUT 2 POWER – V(–) 8 14 Base Socket *Input shunt resistor incorporated for current input. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2SBS SPECIFICATIONS ES-5089 Rev.10 Page 3/3 70.5 (2.78) 59 (2.32) 4 (.16) 72 (2.83)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M2SBS?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods