Manufacturers
M-SYSTEMS M2PV
Description
M-Systems M2PV Mini-M Series Super-mini Signal Conditioner; P/I Transducer
Part Number
M2PV
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Accuracy
±0.3 %
Construction
Plug-in
DC Current
0 – 20 mA DC
DC VOLTAGE
0 – 12 V DC
Dielectric strength
2000 V AC @1 minute (output to power to ground)
Housing Material
Flame-resistant resin (black)
Isolation
Output to power
Line voltage effect
±0.1 % over voltage range
Load resistance
Output drive 15 V max.
Minimum span
5 mV
Offset
Max. 1.5 times span
Output & power input
M3 screw terminals (torque 0.8 N-m)
Over-range output
Approx. -10 to +120 % at 1 – 5 V
Permissible over-range
196 kPa (2.0 kgf/cm2, 1.96 bar, 28 psig)
Pneumatic
6 mm dia (.24”) tube
Span adjustment
95 to 105 % (front)
Temp. coefficient
±0.03 %/°C (±0.02 %/°F)
Zero adjustment
-5 to +5 % (front)
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval (selected models)
- Fixed range or PC programmable models selectable
- M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
- Selectable 100-240V AC/24V DC power input
- Standard DIN rail or surface mounting
Datasheet
Extracted Text
Model ZERO SPAN MODEL: M2PV E: 0 – 16 mA DC (Load resistance 900 Ω max.) Super-mini Signal Conditioners Mini-M Series F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) P/I TRANSDUCER Z: Specify current (See OUTPUT SPECIFICATIONS) Functions & Features Voltage • Converts a standard pneumatic signal into a 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) proportional DC output 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) • CE marking 3: 0 – 1 V DC (Load resistance 1000 Ω min.) • UL approval 4: 0 – 10 V DC (Load resistance 10 kΩ min.) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) Typical Applications 6: 1 – 5 V DC (Load resistance 5000 Ω min.) • Converting a pneumatic system into a 4 – 20 mA for 0: Specify voltage (See OUTPUT SPECIFICATIONS) indicating and controlling in DCS system [3] POWER INPUT 23 (.91) AC Power M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) 76 (2.99) (Select ‘/N’ for ‘Standards & Approvals’ code.) M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) 126 (90 – 264 V for UL) (4.96) DC Power R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) MODEL: M2PV–C[1][2]–[3][4] R2: 11 – 27 V DC (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) ORDERING INFORMATION (Select ‘/N’ for ‘Standards & Approvals’ code.) • Code number: M2PV-C[1][2]-[3][4] P: 110 V DC Specify a code from below for each [1] through [4]. (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) (e.g. M2PV-C2SA-M2/CE/Q) (110 V ±10 % for UL) • Special output range (For codes Z & 0) • Specify the specification for option code /Q [4] OPTIONS (multiple selections) (e.g. /C01/S01) STANDARDS & APPROVALS (must be specified) /N: Without CE or UL PNEUMATIC CONNECTION /CE: CE marking C: 6 mm dia. (.24”) /UL: UL approval (CE marking) OTHER OPTIONS blank: none [1] INPUT /Q: Option other than the above (specify the specification) 1S: 19.6 – 98.1 kPa (UL not available) 2S: 20 – 100 kPa 3S: 20.7 – 103.4 kPa 1: 0.2 – 1.0 kgf/cm2 SPECIFICATIONS OF OPTION: Q (multiple selections) 2: 0.2 – 1.0 bar COATING (For the detail, refer to M-System's web site.) 3: 3 – 15 psig /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating [2] OUTPUT TERMINAL SCREW MATERIAL Current /S01: Stainless steel A: 4 – 20 mA DC (Load resistance 750 Ω max.) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) http://www.m-system.co.jp/ M2PV SPECIFICATIONS ES-5044 Rev.12 Page 1/3 MODEL: M2PV GENERAL SPECIFICATIONS STANDARDS & APPROVALS Construction: Plug-in CE conformity: Connection EMC Directive (2004/108/EC) Output & power input: M3 screw terminals (torque 0.8 N·m) EN 61000-6-4 (EMI) Pneumatic: 6 mm dia (.24”) tube EN 61000-6-2 (EMS) Housing material: Flame-resistant resin (black) Low Voltage Directive (2006/95/EC) Isolation: Output to power EN 61010-1 Overrange output: Approx. -10 to +120 % at 1 – 5 V Installation Category II Zero adjustment: -5 to +5 % (front) Pollution Degree 2 Span adjustment: 95 to 105 % (front) Max. operating voltage 300 V Output to power: Reinforced insulation Approval: INPUT SPECIFICATIONS UL/C-UL nonincendive Class I, Division 2, ■ INPUT Groups A, B, C, and D hazardous locations 19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm2 (UL 1604, CAN/CSA-C22.2 No.213) 20 – 100 kPa, 0.2 – 1.0 bar UL/C-UL general safety requirements 20.7 – 103.4 kPa, 3 – 15 psig (UL 61010B-1, CAN/CSA-C22.2 No.1010-1) OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. • DC Voltage: 0 – 12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 1 V INSTALLATION Power Consumption •AC Power input: Approx. 3 VA at 100 V Approx. 4 VA at 200 V Approx. 5 VA at 264 V •DC Power input: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lbs) PERFORMANCE in percentage of span Accuracy: ±0.3 % Temp. coefficient: ±0.03 %/°C (±0.02 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28 psig) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (output to power to ground) http://www.m-system.co.jp/ M2PV SPECIFICATIONS ES-5044 Rev.12 Page 2/3 MODEL: M2PV DIMENSIONS unit: mm (inch) PNEUMATIC COUPLER (tube size 6 [.24] dia.) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 approx. 21.5 (.85) 12 (.47) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Semiconductor Low Drift Output + INPUT 9 Pressure Sensor Amplifier Driver OUTPUT – 12 13 U(+) CONSTANT POWER CURRENT 14 V(–) Base Socket Specifications are subject to change without notice. http://www.m-system.co.jp/ M2PV SPECIFICATIONS ES-5044 Rev.12 Page 3/3 70.5 (2.78) 59 (2.32) 4 (.16) 72 (2.83)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M2PV?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods