Manufacturers
M-SYSTEMS M2MST
Description
M-Systems M2MST Mini-M Series Super-mini Signal Conditioner; Parameter Generator
Part Number
M2MST
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
AC Power input
Approx. 3 VA at 100 V; Approx. 4 VA at 200 V; Approx. 5 VA at 264 V
Connection
M3 screw terminals (torque 0.8 N•m)
Construction
Plug-in
DC Power input
Approx. 3 W
Dielectric strength
2000 V AC @1 minute (output to power to ground
Display selector
Double-throw SW (front)
Housing material
Flame-resistant resin (black)
Insulation resistance
Greater than 100 M Omega with 500 V DC
Isolation
Output to power
Line voltage effect
±0.1 % over voltage range
Mounting
Surface or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Over-range output
Approx. -10 to +105 % at 1 – 5 V
Polarity indicator
Dual color (red/green) LED; Red with a positive set value; Green with a negative set value.
Power saving mode
Indicators turn off when the switches are left untouched for 1 minute, or when the display selector is set to the bottom position
Set-point adjustment
-10.0 – +105 %; 0.1 % increments (1 % increments over 100 %)
Set-point display
Red LED; 6.4 mm (.25”) 7 segment, 3 digits
Setting accuracy
±0.1%
Span adjustment
95 to 105 % (front)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
UP/DOWN control
Double-throw, momentary SW (front)
Weight
150 g (0.33 lbs)
Zero adjustment
-5 to +5 % (front)
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval
- Easy setting with the front digital display
- Fixed range or PC programmable models selectable
- M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring
- Provides a constant DC signal
- Selectable 100-240V AC/24V DC power input
- Set-point adjustable from -10.0 % to +105 %
- Standard DIN rail or surface mounting
Datasheet
Extracted Text
Model MODEL: M2MST 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) Super-mini Signal Conditioners Mini-M Series 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) PARAMETER GENERATOR Functions & Features [2] POWER INPUT • Provides a constant DC signal AC Power • Setpoint adjustable from -10.0 % to +105 % M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, • Easy setting with the front digital display 47 – 66 Hz) • CE marking DC Power R: 24 V DC Typical Applications (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) • Various parameter settings for computers and R2: 11 – 27 V DC DCS’s (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) (Select ‘/N’ for ‘Standards & Approvals’ code.) 23 (.91) P: 110 V DC (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) 76 (2.99) [3] OPTIONS (multiple selections) STANDARDS & APPROVALS (must be specified) /N: Without CE 124 (4.88) /CE: CE marking mm (inch) OTHER OPTIONS blank: none /Q: Option other than the above (specify the specification) MODEL: M2MST–[1]–[2][3] SPECIFICATIONS OF OPTION: Q (multiple selections) ORDERING INFORMATION COATING (For the detail, refer to M-System's web site.) • Code number: M2MST-[1]-[2][3] /C01: Silicone coating Specify a code from below for each [1] through [3]. /C02: Polyurethane coating (e.g. M2MST-A-M2/CE/Q) /C03: Rubber coating • Special output range (For codes Z & 0) TERMINAL SCREW MATERIAL • Specify the specification for option code /Q /S01: Stainless steel (e.g. /C01/S01) GENERAL SPECIFICATIONS [1] OUTPUT Construction: Plug-in Current Connection: M3 screw terminals (torque 0.8 N·m) A: 4 – 20 mA DC (Load resistance 750 Ω max.) Housing material: Flame-resistant resin (black) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) Isolation: Output to power C: 1 – 5 mA DC (Load resistance 3000 Ω max.) Overrange output: Approx. -10 to +105 % at 1 – 5 V D: 0 – 20 mA DC (Load resistance 750 Ω max.) Output is factory set to 0%. E: 0 – 16 mA DC (Load resistance 900 Ω max.) Zero adjustment: -5 to +5 % (front) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) Span adjustment: 95 to 105 % (front) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Setpoint adjustment: -10.0 – +105 %; Z: Specify current (See OUTPUT SPECIFICATIONS) 0.1 % increments (1 % increments over 100 %) Voltage Display selector: Double-throw SW (front) 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) UP/DOWN control: Double-throw, momentary SW (front) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) ■ INDICATORS 3: 0 – 1 V DC (Load resistance 1000 Ω min.) Setpoint display: Red LED; 6.4 mm (.25”) 7 segment, 3 4: 0 – 10 V DC (Load resistance 10 kΩ min.) digits 5: 0 – 5 V DC (Load resistance 5000 Ω min.) Polarity indicator: Dual color (red/green) LED; Red with a 6: 1 – 5 V DC (Load resistance 5000 Ω min.) http://www.m-system.co.jp/ M2MST SPECIFICATIONS ES-5080 Rev.2 Page 1/4 MODEL: M2MST positive set value; Green with a negative set value. Power saving mode: Indicators turn off when the switches are left untouched for 1 minute, or when the display selector is set to the bottom position. OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. • DC Voltage: -10 – +12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V INSTALLATION Power Consumption •AC Power input: Approx. 3 VA at 100 V Approx. 4 VA at 200 V Approx. 5 VA at 264 V •DC Power input: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lbs) PERFORMANCE in percentage of span Setting accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (output to power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) Low Voltage Directive (2006/95/EC) EN 61010-1 Installation Category II Pollution Degree 2 Max. operating voltage 300 V Output to power: Reinforced insulation http://www.m-system.co.jp/ M2MST SPECIFICATIONS ES-5080 Rev.2 Page 2/4 MODEL: M2MST EXTERNAL VIEW (A) Polarity Indicator LED (B) Setpoint Display (C) Display Selector Top: ON Bottom: OFF (D) UP/DOWN Control (E) Zero Adj. (F) Span Adj. The front cover cannot be turned open by 180 deg. when there is no extra space between units. • How to Set an Output Turn the Display Selector (C) to the top position. The Setpoint Display (B) shows the current setpoint (-10.0 – +105 %). Press UP/DOWN Control (D) until the display shows a desired set value. The Polarity Indicator LED (A) is red when the set value is in positive range, green when in negative range. The output is factory set to 0 %. DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 7.3 (.29) 86.7 (3.41) 15 (.59) 116.7 (4.59) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM DISPLAY UP/DOWN SELECTOR SW Z S Isolation Digital Output 1 9 + Computation Driver OUTPUT 4 12 – 5 13 U(+) Setpoint POWER Display 8 14 V(–) Base Socket http://www.m-system.co.jp/ M2MST SPECIFICATIONS ES-5080 Rev.2 Page 3/4 70.5 (2.78) 59 (2.32) 4 (.16) 72 (2.83) MODEL: M2MST Specifications are subject to change without notice. http://www.m-system.co.jp/ M2MST SPECIFICATIONS ES-5080 Rev.2 Page 4/4
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M2MST?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods