Manufacturers
M-SYSTEMS M2DYS
Description
M-Systems M2DYS Mini-M Series Super-Mini Signal Conditioners; Current Loop Supply
Part Number
M2DYS
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
Accuracy
±0.1 %
Connection
M3 screw terminals (torque 0.8 N·m)
Construction
Plug-in
Current limited
30 mA max.
Current rating
= 22 mA DC
DC Current
0 – 20 mA DC
DC VOLTAGE
-10 – +12 V DC
Dielectric strength
2000 V AC @1 minute (input to output to power to ground)
Housing material
Flame-resistant resin (black)
Isolation
Input to output to power
Load resistance
Output drive 1 mA max.; at = 0.5 V
Minimum span
5 mV
Offset
Max. 1.5 times span
Output signal
±0.1 % over voltage range
Output voltage
24 – 28 V DC with no load; 18 V DC min. at 20 mA
Overrange output
Approx. -10 to +120 % at 1 – 5 V
Protected time duration
No limit
Span adjustment
95 to 105 % (front)
Supply output
±3 % over voltage range
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Zero adjustment
-5 to +5 % (front)
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval (selected models)
- Fixed range or PC programmable models selectable
- M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
- Selectable 100-240V AC/24V DC power input
- Standard DIN rail or surface mounting
Datasheet
Extracted Text
Model ZERO SPAN MODEL: M2DYS G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Super-mini Signal Conditioners Mini-M Series Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage CURRENT LOOP SUPPLY 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) Functions & Features 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) • Powers a 4 – 20 mA DC current loop 3: 0 – 1 V DC (Load resistance 1000 Ω min.) • Short circuit protection 4: 0 – 10 V DC (Load resistance 10 kΩ min.) • Applicable to smart transmitters 5: 0 – 5 V DC (Load resistance 5000 Ω min.) • CE marking 6: 1 – 5 V DC (Load resistance 5000 Ω min.) • UL approval 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) Typical Applications 0: Specify voltage (See OUTPUT SPECIFICATIONS) • Various 2-wire transmitters • Isolation application (4 – 20 mA input) [2] POWER INPUT AC Power 23 (.91) M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) (Select ‘/N’ for ‘Standards & Approvals’ code.) 76 (2.99) M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) (90 – 264 V for UL) 124 DC Power (4.88) R: 24 V DC mm (inch) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) R2: 11 – 27 V DC MODEL: M2DYS–24[1]–[2][3] (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) (Select ‘/N’ for ‘Standards & Approvals’ code.) P: 110 V DC ORDERING INFORMATION (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) • Code number: M2DYS-24[1]-[2][3] (110 V ±10 % for UL) Specify a code from below for each [1] through [3]. (e.g. M2DYS-24A-M2/CE/Q) • Special output range (For codes Z & 0) [3] OPTIONS (multiple selections) • Specify the specification for option code /Q STANDARDS & APPROVALS (must be specified) (e.g. /C01/S01) /N: Without CE or UL /CE: CE marking /UL: UL approval (CE marking) SUPPLY OUTPUT OTHER OPTIONS 24: 24 V DC blank: none /Q: Option other than the above (specify the specification) INPUT (UL not available) Current 4 – 20 mA DC SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) [1] OUTPUT /C01: Silicone coating Current /C02: Polyurethane coating A: 4 – 20 mA DC (Load resistance 750 Ω max.) /C03: Rubber coating B: 2 – 10 mA DC (Load resistance 1500 Ω max.) TERMINAL SCREW MATERIAL C: 1 – 5 mA DC (Load resistance 3000 Ω max.) /S01: Stainless steel D: 0 – 20 mA DC (Load resistance 750 Ω max.) E: 0 – 16 mA DC (Load resistance 900 Ω max.) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) http://www.m-system.co.jp/ M2DYS SPECIFICATIONS ES-5025 Rev.9 Page 1/3 MODEL: M2DYS Supply output: ±3 % over voltage range GENERAL SPECIFICATIONS Output signal: ±0.1 % over voltage range Construction: Plug-in Insulation resistance: ≥ 100 MΩ with 500 V DC Connection: M3 screw terminals (torque 0.8 N·m) Dielectric strength: 2000 V AC @1 minute (input to output Housing material: Flame-resistant resin (black) to power to ground) Isolation: Input to output to power Overrange output: Approx. -10 to +120 % at 1 – 5 V Zero adjustment: -5 to +5 % (front) STANDARDS & APPROVALS Span adjustment: 95 to 105 % (front) CE conformity: EMC Directive (2004/108/EC) EN 61000-6-4 (EMI) SUPPLY OUTPUT EN 61000-6-2 (EMS) (across the terminals 1 – 8) Low Voltage Directive (2006/95/EC) Output voltage: 24 – 28 V DC with no load EN 61010-1 18 V DC min. at 20 mA Installation Category II Current rating: ≤ 22 mA DC Pollution Degree 2 • Shortcircuit Protection Max. operating voltage 300 V Current limited: 30 mA max. Input or output to power: Reinforced insulation Protected time duration: No limit Input to output: Basic insulation Approval: INPUT SPECIFICATIONS UL/C-UL nonincendive Class I, Division 2, • DC Current: Input resistors incorporated Groups A, B, C, and D hazardous locations Approx. 300 Ω (50 Ω as receiving resistor, 250 Ω across the (ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213) monitor terminals) UL/C-UL general safety requirements (UL 61010B-1, CAN/CSA-C22.2 No.1010-1) OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. • DC Voltage: -10 – +12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V INSTALLATION Power Consumption •AC Power input: Approx. 3 VA at 100 V Approx. 4 VA at 200 V Approx. 5 VA at 264 V •DC Power input: Approx. 3 W Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 150 g (0.33 lbs) PERFORMANCE in percentage of span Accuracy: ±0.1 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Response time: ≤ 0.5 sec. (0 – 90 %) Line voltage effect http://www.m-system.co.jp/ M2DYS SPECIFICATIONS ES-5025 Rev.9 Page 2/3 MODEL: M2DYS DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Output + 1 9 + Amplifier Driver 50Ω INPUT OUTPUT – 4 12 – 2-WIRE XMTR PWR SUPPLY + 8 13 U(+) 250Ω – POWER Current 5 14 V(–) MONITOR V Limiter + 1 – 5V DC Base Socket � When Used as DC Supply � When Used as Isolator 2-WIRE TRANSMITTER – + + 1 + 1 50Ω 50Ω INPUT – 4 – 4 + + 8 8 250Ω 250Ω 5 5 Specifications are subject to change without notice. http://www.m-system.co.jp/ M2DYS SPECIFICATIONS ES-5025 Rev.9 Page 3/3 70.5 (2.78) 59 (2.32) 4 (.16) 72 (2.83)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M2DYS?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods