Industrial Trading

Description

M-Systems M2CDS Mini-M Series Super-mini Signal Conditioner; Delay Buffer

Part Number

M2CDS

Price

Request Quote

Manufacturer

M-SYSTEMS

Lead Time

Request Quote

Category

Signal Conditioning

Specifications

AC Power input

Approx. 3 VA at 100 V; Approx. 4 VA at 200 V; Approx. 5 VA at 264 V

Accuracy

±0.2 %

Adjustable range

Approx. 0.5 to 20 sec. (factory set to MIN.)

Connection

M3 screw terminals (torque 0.8 N•m)

Construction

Plug-in

DC Power input

Approx. 3 W

Dielectric Strength

2000 V AC @1 minute (input to output to power to ground)

Housing Material

Flame-resistant resin (black)

Insulation resistance

Greater than 100 M Omega with 500 V DC

Isolation

Input to output to power

Line Voltage Effect

±0.1 % over voltage range

Mounting

Surface or DIN rail

Operating humidity

30 to 90 %RH (non-condensing)

Operating temperature

-5 to +55°C (23 to 131°F)

Over-range output

Approx. -10 to +120 % at 1 – 5 V

Span adjustment

95 to 105 % (front)

TEMP. COEFFICIENT

±0.015 %/°C (±0.008 %/°F)

Time constant adjustment

260°-turn screwdriver adjustment (front)

Weight

150 g (0.33 lbs)

Zero adjustment

-5 to +5 % (front)

Features

2000V AC isolation
Base socket included with modules
CE marking and UL/C-UL Class 1 Div 2 approval
Fixed range or PC programmable models selectable
Generates a first order lag output in accordance with the preset time constant
M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
Selectable 100-240V AC/24V DC power input
Standard DIN rail or surface mounting
Time constant adjustable up to 20 seconds

Datasheet

M2CDS-949894268.pdf

88 KiB

Download

Extracted Text

Model ZERO SPAN MODEL: M2CDS Voltage Super-mini Signal Conditioners Mini-M Series 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) 15: 0 – 50 mV DC (Input resistance 10 kΩ min.) DELAY BUFFER 16: 0 – 60 mV DC (Input resistance 10 kΩ min.) Functions & Features 2: 0 – 100 mV DC (Input resistance 100 kΩ min.) • Generates a first order lag output in accordance with the 3: 0 – 1 V DC (Input resistance 1 MΩ min.) preset time constant 4: 0 – 10 V DC (Input resistance 1 MΩ min.) • Time constant adjustable up to 20 seconds 5: 0 – 5 V DC (Input resistance 1 MΩ min.) • CE marking 6: 1 – 5 V DC (Input resistance 1 MΩ min.) • UL approval 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) Typical Applications 0: Specify voltage (See INPUT SPECIFICATIONS) • Smoothing pulsating signals • Stabilizing indicator value of dust chambers [2] OUTPUT Current 23 (.91) A: 4 – 20 mA DC (Load resistance 750 Ω max.) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) 76 (2.99) D: 0 – 20 mA DC (Load resistance 750 Ω max.) E: 0 – 16 mA DC (Load resistance 900 Ω max.) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) 124 G: 0 – 1 mA DC (Load resistance 15 kΩ max.) (4.88) Z: Specify current (See OUTPUT SPECIFICATIONS) mm (inch) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) MODEL: M2CDS–[1][2]–[3][4] 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) ORDERING INFORMATION 5: 0 – 5 V DC (Load resistance 5000 Ω min.) • Code number: M2CDS-[1][2]-[3][4] 6: 1 – 5 V DC (Load resistance 5000 Ω min.) Specify a code from below for each [1] through [4]. 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) (e.g. M2CDS-6A-M2/CE/Q) 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) • Special input and output range (For codes Z & 0) 0: Specify voltage (See OUTPUT SPECIFICATIONS) • Specify the specification for option code /Q (e.g. /C01/S01) [3] POWER INPUT AC Power [1] INPUT M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, Current 47 – 66 Hz) A: 4 – 20 mA DC (Input resistance 250 Ω) (90 – 264 V for UL) A1: 4 – 20 mA DC (Input resistance 50 Ω) DC Power B: 2 – 10 mA DC (Input resistance 500 Ω) R: 24 V DC C: 1 – 5 mA DC (Input resistance 1000 Ω) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) D: 0 – 20 mA DC (Input resistance 50 Ω) R2: 11 – 27 V DC E: 0 – 16 mA DC (Input resistance 62.5 Ω) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) F: 0 – 10 mA DC (Input resistance 100 Ω) (Select ‘/N’ for ‘Standards & Approvals’ code.) G: 0 – 1 mA DC (Input resistance 1000 Ω) P: 110 V DC H: 10 – 50 mA DC (Input resistance 100 Ω) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) J: 0 – 10 μA DC (Input resistance 1000 Ω) (110 V ±10 % for UL) K: 0 – 100 μA DC (Input resistance 1000 Ω) GW: -1 – +1 mA DC (Input resistance 1000 Ω) FW: -10 – +10 mA DC (Input resistance 100 Ω) Z: Specify current (See INPUT SPECIFICATIONS) http://www.m-system.co.jp/ M2CDS SPECIFICATIONS ES-5074 Rev.6 Page 1/4 MODEL: M2CDS Minimum span: 5 mV [4] OPTIONS (multiple selections) Offset: Max. 1.5 times span STANDARDS & APPROVALS (must be specified) Load resistance: Output drive 1 mA max.; at ≥ 0.5 V /N: Without CE or UL /CE: CE marking /UL: UL approval (CE marking) INSTALLATION OTHER OPTIONS Power Consumption blank: none •AC Power input: /Q: Option other than the above (specify the specification) Approx. 3 VA at 100 V (UL not available) Approx. 4 VA at 200 V Approx. 5 VA at 264 V •DC Power input: Approx. 3 W SPECIFICATIONS OF OPTION: Q (multiple selections) Operating temperature: -5 to +55°C (23 to 131°F) COATING (For the detail, refer to M-System's web site.) Operating humidity: 30 to 90 %RH (non-condensing) /C01: Silicone coating Mounting: Surface or DIN rail /C02: Polyurethane coating Weight: 150 g (0.33 lbs) /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel PERFORMANCE in percentage of span Accuracy: ±0.2 % Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) GENERAL SPECIFICATIONS Line voltage effect: ±0.1 % over voltage range Construction: Plug-in Insulation resistance: ≥ 100 MΩ with 500 V DC Connection: M3 screw terminals (torque 0.8 N·m) Dielectric strength: 2000 V AC @1 minute (input to output Housing material: Flame-resistant resin (black) to power to ground) Isolation: Input to output to power Time constant adjustment: 260°-turn screwdriver adjustment (front) STANDARDS & APPROVALS Adjustable range: Approx. 0.5 to 20 sec. (factory set to CE conformity: MIN.) EMC Directive (2004/108/EC) Overrange output: Approx. -10 to +120 % at 1 – 5 V EN 61000-6-4 (EMI) Zero adjustment: -5 to +5 % (front) EN 61000-6-2 (EMS) Span adjustment: 95 to 105 % (front) Low Voltage Directive (2006/95/EC) EN 61010-1 Installation Category II INPUT SPECIFICATIONS Pollution Degree 2 • DC Current: Max. operating voltage 300 V Shunt resistor attached to the input terminals (0.5 W) Input or output to power: Reinforced insulation Specify input resistance value for code Z. Input to output: Basic insulation • DC Voltage: -300 – +300 V DC Approval: Minimum span: 3 mV UL/C-UL nonincendive Class I, Division 2, Offset: Max. 1.5 times span Groups A, B, C, and D hazardous locations Input resistance (UL 1604, CAN/CSA-C22.2 No.213) Span 3 – 10 mV : ≥ 10 kΩ UL/C-UL general safety requirements Span 10 – 100 mV : ≥ 10 kΩ (UL 61010B-1, CAN/CSA-C22.2 No.1010-1) Span 0.1 – 1 V : ≥ 100 kΩ Span ≥ 1 V : ≥ 1 MΩ OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. • DC Voltage: -10 – +12 V DC http://www.m-system.co.jp/ M2CDS SPECIFICATIONS ES-5074 Rev.6 Page 2/4 MODEL: M2CDS EXTERNAL VIEW Time Constant Adj. Zero Adj. Span Adj. DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) INPUT RESISTOR (model: REM2) 4 1 8 5 12 9 14 13 Input shunt resistor attached for current input. http://www.m-system.co.jp/ M2CDS SPECIFICATIONS ES-5074 Rev.6 Page 3/4 70.5 (2.78) 19 (.75) 59 (2.32) 4 (.16) 72 (2.83) MODEL: M2CDS SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM TIME CONSTANT ADJ. Z S Isolation Low Drift Digital Output + 1 9 + * Amplifier Computation Driver INPUT R OUTPUT – 4 12 – 5 13 U(+) POWER 8 14 V(–) Base Socket *Input shunt resistor attached for current input. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2CDS SPECIFICATIONS ES-5074 Rev.6 Page 4/4

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products