Industrial Trading

Description

M-Systems M2AVS Mini-M Series Super-mini Signal Conditioner; DC Alarm

Part Number

M2AVS

Price

Request Quote

Manufacturer

M-SYSTEMS

Lead Time

Request Quote

Category

Signal Conditioning

Specifications

Connection

M3 screw terminals (torque 0.8 N•m)

Construction

Plug-in

Housing Material

Flame-resistant resin (black)

Isolation

Input to output to power

Monitor jacks

Output 0 – 1 V for 0 – 100 % set-points

Output 1

Red light turns on when the coil is energized.

Output 2

Green light turns on when the coil is energized.

Power ON timer

Relays de-energized for approx. 2 seconds after power is turned on.

Set-point adjustments

Multiturn screwdriver adjustments (front); 0 – 100% independently

Features

2000V AC isolation
Base socket included with modules
CE marking and UL/C-UL Class 1 Div 2 approval (selected models)
Fixed range or PC programmable models selectable
M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
Selectable 100-240V AC/24V DC power input
Standard DIN rail or surface mounting

Datasheet

M2AVS-1769902766.pdf

94 KiB

Download

Extracted Text

Model M2AVS MODEL: M2AVS FW: -10 – +10 mA DC (Input resistance 100 Ω) Super-mini Signal Conditioners Mini-M Series Z: Specify current (See INPUT SPECIFICATIONS) Voltage DC ALARM 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) Functions & Features 15: 0 – 50 mV DC (Input resistance 10 kΩ min.) • Provides N.O. relay outputs at preset DC input levels 16: 0 – 60 mV DC (Input resistance 10 kΩ min.) • Dual trip 2: 0 – 100 mV DC (Input resistance 100 kΩ min.) • Multi-turn potentiometer adj. 3: 0 – 1 V DC (Input resistance 1 MΩ min.) • Monitor jacks help setpoint adj. 4: 0 – 10 V DC (Input resistance 1 MΩ min.) • Power ON timer 5: 0 – 5 V DC (Input resistance 1 MΩ min.) • Relays can be powered 110 V DC 6: 1 – 5 V DC (Input resistance 1 MΩ min.) • CE marking for 24 V DC power 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) Typical Applications 0: Specify voltage (See INPUT SPECIFICATIONS) • Annunciator (Select ‘/N’ for ‘Standards & Approvals’ code.) • Various alarm applications 01: Specify voltage (See INPUT SPECIFICATIONS) (Select ‘/CE’ for ‘Standards & Approvals’ code.) 23 (.91) [2] SETPOINT 1 OUTPUT 1: Hi (coil energized at alarm) 76 (2.99) 3: Lo (coil energized at alarm) [3] SETPOINT 2 OUTPUT 124 (4.88) 1: Hi (coil energized at alarm) mm (inch) 3: Lo (coil energized at alarm) MODEL: M2AVS–[1][2][3][4]–[5][6] [4] OUTPUT 2: Relay; N.O. or make contact 6: Photo MOSFET relay; N.O. ORDERING INFORMATION • Code number: M2AVS-[1][2][3][4]-[5][6] Specify a code from below for each [1] through [6]. [5] POWER INPUT (e.g. M2AVS-6112-R/CE/Q) AC Power • Special input range (For codes Z & 0, 01) M: 85 – 264 V AC (Operational voltage range 85 – 264 V, • Specify the specification for option code /Q 47 – 66 Hz) (e.g. /C01/S01) (Select ‘/N’ for ‘Standards & Approvals’ code.) DC Power R: 24 V DC [1] INPUT (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) Current R2: 11 – 27 V DC A: 4 – 20 mA DC (Input resistance 250 Ω) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) A1: 4 – 20 mA DC (Input resistance 50 Ω) (Select ‘/N’ for ‘Standards & Approvals’ code.) B: 2 – 10 mA DC (Input resistance 500 Ω) P: 110 V DC C: 1 – 5 mA DC (Input resistance 1000 Ω) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) D: 0 – 20 mA DC (Input resistance 50 Ω) (Select ‘/N’ for ‘Standards & Approvals’ code.) E: 0 – 16 mA DC (Input resistance 62.5 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) [6] OPTIONS (multiple selections) H: 10 – 50 mA DC (Input resistance 100 Ω) STANDARDS & APPROVALS (must be specified) J: 0 – 10 μA DC (Input resistance 1000 Ω) /N: Without CE K: 0 – 100 μA DC (Input resistance 1000 Ω) /CE: CE marking GW: -1 – +1 mA DC (Input resistance 1000 Ω) OTHER OPTIONS http://www.m-system.co.jp/ M2AVS SPECIFICATIONS ES-5041 Rev.6 Page 1/4 MODEL: M2AVS blank: none protection is recommended. /Q: Option other than the above (specify the specification) • Photo MOSFET Relay Maximum switching voltage: 30 V AC or 50 V DC Maximum switching current: 0.5 A SPECIFICATIONS OF OPTION: Q (multiple selections) ON resistance: ≤ 2 kΩ COATING (For the detail, refer to M-System's web site.) Leakage current at OFF: ≤ 10 μA /C01: Silicone coating For maximum relay life with inductive loads, external /C02: Polyurethane coating protection is recommended. /C03: Rubber coating Alarm Trip Operation Terminal No. in parentheses TERMINAL SCREW MATERIAL /S01: Stainless steel (5-8)ON/Hi Output 1 (5-8)ON/Lo GENERAL SPECIFICATIONS (9-12)ON/Hi Output 2 Construction: Plug-in (9-12)ON/Lo Connection: M3 screw terminals (torque 0.8 N·m) Input Housing material: Flame-resistant resin (black) (%) 0 � 50 � 100 Isolation: Input to output to power Output 2 Output 1 Setpoint Setpoint Setpoint adjustments: Multi-turn screwdriver adjustments Trip Operation in Power Failure: Both relays turn off. (front); 0 – 100% independently Monitor jacks: Output 0 – 1 V for 0 – 100 % setpoints Hysteresis (deadband): ≤ 0.5 % Front LEDs INSTALLATION Output 1: Red light turns on when the coil is energized. Power Consumption Output 2: Green light turns on when the coil is energized. •AC Power input: Power ON timer: Relays de-energized for approx. 2 seconds Approx. 3 VA at 100 V after power is turned on. Approx. 4 VA at 200 V Approx. 5 VA at 264 V •DC Power input: Approx. 3 W INPUT SPECIFICATIONS Operating temperature: -5 to +55°C (23 to 131°F) • DC Current: Operating humidity: 30 to 90 %RH (non-condensing) Shunt resistor attached to the input terminals (0.5 W) Mounting: Surface or DIN rail Specify input resistance value for code Z. Weight: 150 g (0.33 lbs) • DC Voltage: -300 – +300 V DC (-30 – +30 V for the input code 01. Span 30 V max.) Minimum span: 3 mV PERFORMANCE in percentage of span Offset: Max. 1.5 times span Setpoint monitor accuracy: ±0.5 % Input resistance Temp. coefficient: ±0.05 %/°C (±0.03 %/°F) Span 3 – 10 mV : ≥ 10 kΩ Response time: ≤ 0.5 sec. (0 – 100 % at 90 % setpoint) Span 10 – 100 mV : ≥ 10 kΩ Line voltage effect: ±0.1 % over voltage range Span 0.1 – 1 V : ≥ 100 kΩ Insulation resistance: ≥ 100 MΩ with 500 V DC Span ≥ 1 V : ≥ 1 MΩ Dielectric strength: 2000 V AC @1 minute (input to output 1 to output 2 to power to ground) OUTPUT SPECIFICATIONS • Relay Contact: STANDARDS & APPROVALS 120 V AC @0.5 A (cos ø = 1) CE conformity: 240 V AC @0.5 A (cos ø = 1) EMC Directive (2004/108/EC) 30 V DC @0.5 A (resistive load) EN 61000-6-4 (EMI) Maximum switching voltage: 250 V AC or 120 V DC EN 61000-6-2 (EMS) Maximum switching power: 120 VA or 15 W (≤ 0.5 A) Low Voltage Directive (2006/95/EC) Minimum load: 5 V DC @10 mA EN 61010-1 Mechanical life: 5 × 107 cycles Installation Category II For maximum relay life with inductive loads, external Pollution Degree 2 http://www.m-system.co.jp/ M2AVS SPECIFICATIONS ES-5041 Rev.6 Page 2/4 MODEL: M2AVS Max. operating voltage 300V Input or power to output: Basic insulation Between outputs: Basic insulation Input to power: Functional insulation FRONT VIEW Output 1 Output 1 Monitor LED Setpoint Monitor (A1) Output 2 Monitor LED Output 2 Setpoint Monitor (A2) COM Output 1 Setpoint Adj. Output 2 Setpoint Adj. Refer to the instruction manual for detailed procedures. DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 7.3 (.29) 86.7 (3.41) 15 (.59) 116.7 (4.59) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) INPUT RESISTOR (model: REM2) 4 1 8 5 12 9 14 13 Input shunt resistor attached for current input. http://www.m-system.co.jp/ M2AVS SPECIFICATIONS ES-5041 Rev.6 Page 3/4 70.5 (2.78) 19 (.75) 59 (2.32) 4 (.16) 72 (2.83) MODEL: M2AVS SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM � Relay Protection • AC Powered COM. SP ADJ. A1 Inductive Load (Coil) 5 Low Drift + 1 Comparator Ry OUTPUT 1 LOAD * Amplifier INPUT R 8 – 4 Varistor or CR Circuit • DC Powered 9 Inductive Comparator Ry OUTPUT 2 Load (Coil) 12 SP ADJ. A2 LOAD 13 U(+) POWER 14 V(–) Diode, Varistor or CR Circuit Base Socket *Input shunt resistor attached for current input. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2AVS SPECIFICATIONS ES-5041 Rev.6 Page 4/4

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products