Manufacturers
M-SYSTEMS M2AMS2
Description
M-Systems M2AMS2 Mini-M Series Super-mini Signal Conditioner; Track/Hold (with Simple Loop Test Output)
Part Number
M2AMS2
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Signal Conditioning
Specifications
AC Power input
Approx. 3 VA at 100 V; Approx. 4 VA at 200 V; Approx. 5 VA at 264V
Accuracy
±0.1 %
Connection
M3 screw terminals (torque 0.8 N•m)
Construction
Plug-in
DC Power input
Approx. 3 W
Dielectric strength
2000 V AC @1 minute (input to outputto power to ground)
DIP switch setting
Selecting output options
Hold control
Contact logic selectable by the DIP switch setting
Housing material
Flame-resistant resin (black)
Insulation resistance
Greater than 100 M Omega with 500 V DC
Isolation
Input to output to power
Line voltage effect
±0.1 % over voltage range
Mounting
Surface or DIN rail
Operating humidity
30 to 90 %RH (non-condensing)
Operating temperature
-5 to +55°C (23 to 131°F)
Over-range output
Approx. -10 to +120 % at 1 – 5 V
Response time
= 0.5 sec. (0 – 90 %)
Span adjustment
95 to 105 % (front)
Status indicator LED 1
Green LED; indicates the transmitter’s function mode (Refer to the instruction manual.)
Status indicator LED 2
Orange LED; indicates the transmitter’s function mode (Refer to the instruction manual.)
Temp. coefficient
±0.015 %/°C (±0.008 %/°F)
Weight
150 g (0.33 lbs)
Zero adjustment
-5 to +5 % (front)
Features
- 2000V AC isolation
- Base socket included with modules
- CE marking and UL/C-UL Class 1 Div 2 approval
- External contact closure as the command
- Fixed range or PC programmable models selectable
- Hold mode: the output at the point of command is held until the command is reset
- M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring
- Selectable 100-240V AC/24V DC power input
- Simple loop test output (0, 50, 100%)
- Standard DIN rail or surface mounting
- Track mode: the output follows proportionally to the input
Datasheet
Extracted Text
Model ZERO SPAN MODEL: M2AMS2 FW: -10 – +10 mA DC (Input resistance 100 Ω) Super-mini Signal Conditioners Mini-M Series Z: Specify current (See INPUT SPECIFICATIONS) Voltage TRACK/HOLD 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) (with simple loop test output) 15: 0 – 50 mV DC (Input resistance 10 kΩ min.) Functions & Features 16: 0 – 60 mV DC (Input resistance 10 kΩ min.) • Track mode: the output follows proportionally to the input 2: 0 – 100 mV DC (Input resistance 10 kΩ min.) • Hold mode: the output at the point of command is held 3: 0 – 1 V DC (Input resistance 100kΩ min.) until the command is reset 4: 0 – 10 V DC (Input resistance 1 MΩ min.) • External contact closure as the command 5: 0 – 5 V DC (Input resistance 1 MΩ min.) • Simple loop test output (0, 50, 100%) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) • CE marking 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) Typical Applications 0: Specify voltage (See INPUT SPECIFICATIONS) • Capturing signals from a composite analyzer performing on each sample in turn [2] OUTPUT Current 23 (.91) A: 4 – 20 mA DC (Load resistance 750 Ω max.) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) 76 (2.99) D: 0 – 20 mA DC (Load resistance 750 Ω max.) E: 0 – 16 mA DC (Load resistance 900 Ω max.) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) 124 G: 0 – 1 mA DC (Load resistance 15 kΩ max.) (4.88) Z: Specify current (See OUTPUT SPECIFICATIONS) mm (inch) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) MODEL: M2AMS2-[1][2]-[3][4] 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) ORDERING INFORMATION 5: 0 – 5 V DC (Load resistance 5000 Ω min.) • Code number: M2AMS2-[1][2]-[3][4] 6: 1 – 5 V DC (Load resistance 5000 Ω min.) Specify a code from below for each [1] through [4]. 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) (e.g. M2AMS2-6A-M2/CE/Q) 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) • Special input and output ranges (For codes Z&0) 0: Specify voltage (See OUTPUT SPECIFICATIONS) • Specify the specification for option code /Q (e.g. /C01/S01) [3] POWER INPUT AC Power [1] INPUT M: 85 – 264 V AC (Operational voltage range 85 – 264 V, Current 47 – 66 Hz) A: 4 – 20 mA DC (Input resistance 250 Ω) (Select ‘/N’ for ‘Standards & Approvals’ code.) A1: 4 – 20 mA DC (Input resistance 50 Ω) M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, B: 2 – 10 mA DC (Input resistance 500 Ω) 47 – 66 Hz) C: 1 – 5 mA DC (Input resistance 1000 Ω) DC Power D: 0 – 20 mA DC (Input resistance 50 Ω) R: 24 V DC E: 0 – 16 mA DC (Input resistance 62.5 Ω) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) F: 0 – 10 mA DC (Input resistance 100 Ω) R2: 11 – 27 V DC G: 0 – 1 mA DC (Input resistance 1000 Ω) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) H: 10 – 50 mA DC (Input resistance 100 Ω) (Select ‘/N’ for ‘Standards & Approvals’ code.) J: 0 – 10 μA DC (Input resistance 1000 Ω) P: 110 V DC K: 0 – 100 μA DC (Input resistance 1000 Ω) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) GW: -1 – +1 mA DC (Input resistance 1000 Ω) http://www.m-system.co.jp/ M2AMS2 SPECIFICATIONS ES-5103 Rev.3 Page 1/4 MODEL: M2AMS2 [4] OPTIONS (multiple selections) OUTPUT SPECIFICATIONS STANDARDS & APPROVALS (must be specified) • DC Current: 0 – 20 mA DC /N: Without CE Minimum span: 1 mA /CE: CE marking Offset: Max. 1.5 times span OTHER OPTIONS Load resistance: Output drive 15 V max. blank: none • DC Voltage: -10 – +12 V DC /Q: Option other than the above (specify the specification) Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating INSTALLATION /C02: Polyurethane coating Power Consumption /C03: Rubber coating •AC Power input: TERMINAL SCREW MATERIAL Approx. 3 VA at 100 V /S01: Stainless steel Approx. 4 VA at 200 V Approx. 5 VA at 264 V •DC Power input: Approx. 3 W GENERAL SPECIFICATIONS Operating temperature: -5 to +55°C (23 to 131°F) Construction: Plug-in Operating humidity: 30 to 90 %RH (non-condensing) Connection: M3 screw terminals (torque 0.8 N·m) Mounting: Surface or DIN rail Housing material: Flame-resistant resin (black) Weight: 150 g (0.33 lbs) Isolation: Input to output to power Overrange output: Approx. -10 to +120 % at 1 – 5 V Zero adjustment: -5 to +5 % (front) PERFORMANCE in percentage of span Span adjustment: 95 to 105 % (front) Accuracy: ±0.1 % Hold control: Contact logic selectable by the DIP switch Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) setting Response time: ≤ 0.5 sec. (0 – 90 %) DIP switch setting: Selecting output options Line voltage effect: ±0.1 % over voltage range Status indicator LED 1: Green LED; indicates the Insulation resistance: ≥ 100 MΩ with 500 V DC transmitter’s function mode (Refer to the instruction Dielectric strength: 2000 V AC @1 minute (input to output manual.) to power to ground) Status indicator LED 2: Orange LED; indicates the transmitter’s function mode (Refer to the instruction STANDARDS & APPROVALS manual.) CE conformity: EMC Directive (2004/108/EC) INPUT SPECIFICATIONS EN 61000-6-4 (EMI) • DC Current: EN 61000-6-2 (EMS) Shunt resistor attached to the input terminals (0.5 W) Low Voltage Directive (2006/95/EC) Specify input resistance value for code Z. EN 61010-1 • DC Voltage: -300 – +300 V DC Installation Category II Minimum span: 3 mV Pollution Degree 2 Offset: Max. 1.5 times span Max. operating voltage 300 V Input resistance Input or output to power: Reinforced insulation Span 3 – 10 mV : ≥ 10 kΩ Input to output: Basic insulation Span 10 – 100 mV : ≥ 10 kΩ Span 0.1 – 1 V : ≥ 100 kΩ Span ≥ 1 V : ≥ 1 MΩ • HOLD CONTROL Contact rating: 5 V @1 mA Detection levels: ≤ 1.25 kΩ / 1 V at ON ≥ 20 kΩ / 4 V at OFF http://www.m-system.co.jp/ M2AMS2 SPECIFICATIONS ES-5103 Rev.3 Page 2/4 MODEL: M2AMS2 EXTERNAL VIEW � FRONT VIEW � SIDE VIEW Status Indicator LED2 Output Function Setting Status Indicator LED1 SW1 1 2 3 4 ON OFF Zero Adj. Span Adj. Refer to the instruction manual for detailed procedures. DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) INPUT RESISTOR (model: REM2) 4 1 8 5 12 9 14 13 Input shunt resistor attached for current input. http://www.m-system.co.jp/ M2AMS2 SPECIFICATIONS ES-5103 Rev.3 Page 3/4 70.5 (2.78) 19 (.75) 59 (2.32) 4 (.16) 72 (2.83) MODEL: M2AMS2 SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM STATUS Z S Isolation Low Drift Digital Output + + 1 9 * Amplifier Computation Driver INPUT R OUTPUT – – 4 12 +5V DIP SWITCH 5kΩ 13 U(+) POWER 5 14 V(–) HOLD CONTROL 8 Base Socket *Input shunt resistor attached for current input. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2AMS2 SPECIFICATIONS ES-5103 Rev.3 Page 4/4
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the M2AMS2?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods