Industrial Trading

Description

M-Systems M2ADS Mini-M Series Super-mini Signal Conditioner; Adder

Part Number

M2ADS

Price

Request Quote

Manufacturer

M-SYSTEMS

Lead Time

Request Quote

Category

Signal Conditioning

Specifications

Accuracy

±0.2 % (±0.4 % with either or both K1, K2 exceeding 1.00)

Connection

M3 screw terminals (torque 0.8 N-m)

Construction

Plug-in

Dielectric strength

2000 V AC @1 minute (input 1 or input 2 to output to power to ground)

Housing material

Flame-resistant resin (black)

Insulation resistance

greater than 100 M omega with 500 V DC

Isolation

Input 1 or input 2 to output to power

Line voltage effect

±0.1 % over voltage range

Over-range output

0 to 120 % (approx.) at 1 – 5 V

Response time

less than 0.5 sec. (0 – 90 %)

Span adjustment

95 to 105 % (front)

Temp. coefficient

±0.015 %/°C (±0.008 %/°F)

Zero adjustment

-5 to +5 % (front)

Features

2000V AC isolation
Base socket included with modules
CE marking and UL/C-UL Class 1 Div 2 approval
Fixed range or PC programmable models selectable
M2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.
Receives two DC inputs and provides an output proportional to the addition of the inputs
Selectable 100-240V AC/24V DC power input
Standard DIN rail or surface mounting

Datasheet

M2ADS-1576377130.pdf

83 KiB

Download

Extracted Text

Model ZERO SPAN MODEL: M2ADS 2: 0 – 100 mV DC (Input resistance 10 kΩ min.) Super-mini Signal Conditioners Mini-M Series 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) ADDER 5: 0 – 5 V DC (Input resistance 1 MΩ min.) Functions & Features 6: 1 – 5 V DC (Input resistance 1 MΩ min.) • Receives two DC inputs and provides an output 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) proportional to the addition of the inputs 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) • CE marking 0: Specify voltage (See INPUT SPECIFICATIONS) • UL approval [2] INPUT 2 Typical Applications Same range availability as Input 1 • Adding two flow signals 23 (.91) [3] OUTPUT Current 76 A: 4 – 20 mA DC (Load resistance 750 Ω max.) (2.99) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) 124 (4.88) E: 0 – 16 mA DC (Load resistance 900 Ω max.) mm (inch) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Z: Specify current (See OUTPUT SPECIFICATIONS) MODEL: M2ADS-[1][2][3]-[4][5] Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) ORDERING INFORMATION 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) • Code number: M2ADS-[1][2][3]-[4][5] 3: 0 – 1 V DC (Load resistance 1000 Ω min.) Specify a code from below for each [1] through [5]. 4: 0 – 10 V DC (Load resistance 10 kΩ min.) (e.g. M2ADS-6AA-M2/CE/Q) 5: 0 – 5 V DC (Load resistance 5000 Ω min.) • Ratios (e.g. K1 = 0.10, K2 = 2.00) 6: 1 – 5 V DC (Load resistance 5000 Ω min.) • Special input and output ranges (For codes Z&0) 4W: -10 – +10 V DC (Load resistance 10 kΩ min.) • Specify the specification for option code /Q 5W: -5 – +5 V DC (Load resistance 5000 Ω min.) (e.g. /C01/S01) 0: Specify voltage (See OUTPUT SPECIFICATIONS) [1] INPUT 1 [4] POWER INPUT Current AC Power A: 4 – 20 mA DC (Input resistance 250 Ω) M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, A1: 4 – 20 mA DC (Input resistance 50 Ω) 47 – 66 Hz) B: 2 – 10 mA DC (Input resistance 500 Ω) (90 – 264 V for UL) C: 1 – 5 mA DC (Input resistance 1000 Ω) DC Power D: 0 – 20 mA DC (Input resistance 50 Ω) R: 24 V DC E: 0 – 16 mA DC (Input resistance 62.5 Ω) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) F: 0 – 10 mA DC (Input resistance 100 Ω) R2: 11 – 27 V DC G: 0 – 1 mA DC (Input resistance 1000 Ω) (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) H: 10 – 50 mA DC (Input resistance 100 Ω) (Select ‘/N’ for ‘Standards & Approvals’ code.) J: 0 – 10 μA DC (Input resistance 1000 Ω) P: 110 V DC K: 0 – 100 μA DC (Input resistance 1000 Ω) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) GW: -1 – +1 mA DC (Input resistance 1000 Ω) (110 V ±10 % for UL) FW: -10 – +10 mA DC (Input resistance 100 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) http://www.m-system.co.jp/ M2ADS SPECIFICATIONS ES-5088 Rev.9 Page 1/3 MODEL: M2ADS Offset: Max. 1.5 times span [5] OPTIONS (multiple selections) Load resistance: Output drive 15 V max. STANDARDS & APPROVALS (must be specified) • DC Voltage: -10 – +12 V DC /N: Without CE or UL Minimum span: 5 mV /CE: CE marking Offset: Max. 1.5 times span /UL: UL approval (CE marking) Load resistance: Output drive 1 mA max.; at ≥ 0.5 V OTHER OPTIONS blank: none /Q: Option other than the above (specify the specification) INSTALLATION (UL not available) Power Consumption •AC Power input: Approx. 3 VA at 100 V SPECIFICATIONS OF OPTION: Q (multiple selections) Approx. 4 VA at 200 V COATING (For the detail, refer to M-System's web site.) Approx. 5 VA at 264 V /C01: Silicone coating •DC Power input: Approx. 3 W /C02: Polyurethane coating Operating temperature: -5 to +55°C (23 to 131°F) /C03: Rubber coating Operating humidity: 30 to 90 %RH (non-condensing) TERMINAL SCREW MATERIAL Mounting: Surface or DIN rail /S01: Stainless steel Weight: 150 g (0.33 lbs) GENERAL SPECIFICATIONS PERFORMANCE in percentage of span Construction: Plug-in Accuracy: ±0.2 % (±0.4 % with either or both K1, K2 Connection: M3 screw terminals (torque 0.8 N·m) exceeding 1.00) Housing material: Flame-resistant resin (black) Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) Isolation: Input 1 or input 2 to output to power Response time: ≤ 0.5 sec. (0 – 90 %) (Negative sides of the input 1 and 2 must be of the same Line voltage effect: ±0.1 % over voltage range potential.) Insulation resistance: ≥ 100 MΩ with 500 V DC Overrange output: 0 to 120 % (approx.) at 1 – 5 V Dielectric strength: 2000 V AC @1 minute (input 1 or input 2 Zero adjustment: -5 to +5 % (front) to output to power to ground) Span adjustment: 95 to 105 % (front) Equation: Output = K1 × Input 1 + K2 × Input 2 K1, K2: 0.10 to 2.00 specified when ordering (0.40 ≤ K1 + K2 ) STANDARDS & APPROVALS Input 1, Input 2: 0 to 120% CE conformity: Forcibly limited to 0% and 120% respectively when the EMC Directive (2004/108/EC) signal is out of range. EN 61000-6-4 (EMI) EN 61000-6-2 (EMS) Low Voltage Directive (2006/95/EC) INPUT SPECIFICATIONS EN 61010-1 • DC Current: Input resistor incorporated Installation Category II Specify input resistance value for code Z. Pollution Degree 2 (R ≤ 0.25 W ÷ [F.S. Current]2) Max. operating voltage 300 V • DC Voltage: -300 – +300 V DC Input 1 or input 2 or output to power: Reinforced insulation Minimum span: 3 mV Input 1 or input 2 to output: Basic insulation Offset: Max. 1.5 times span Approval: Input resistance UL/C-UL nonincendive Class I, Division 2, Span 3 – 10 mV : ≥ 10 kΩ Groups A, B, C, and D hazardous locations Span 10 – 100 mV : ≥ 10 kΩ (UL 1604, CAN/CSA-C22.2 No.213) Span 0.1 – 1 V : ≥ 100 kΩ UL/C-UL general safety requirements Span ≥ 1 V : ≥ 1 MΩ (UL 61010B-1, CAN/CSA-C22.2 No.1010-1) OUTPUT SPECIFICATIONS • DC Current: 0 – 20 mA DC Minimum span: 1 mA http://www.m-system.co.jp/ M2ADS SPECIFICATIONS ES-5088 Rev.9 Page 2/3 MODEL: M2ADS DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Z S Isolation Low Drift Digital Output + + 1 9 Amplifier Computation Driver * INPUT 1 OUTPUT – – 4 12 Low Drift + U(+) 5 13 Amplifier * INPUT 2 POWER – V(–) 8 14 Base Socket *Input shunt resistor incorporated for current input. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2ADS SPECIFICATIONS ES-5088 Rev.9 Page 3/3 70.5 (2.78) 59 (2.32) 4 (.16) 72 (2.83)

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products