Industrial Trading chervon right Manufacturers chervon right K chervon right KONTRON chervon right CP3923-RC
About product Specifications Features Datasheet FAQ

KONTRON CP3923-RC

Image of KONTRON CP3923-RC

Description

KONTRON CP3923-RC Compact PCI Switch - 3U, 4HP, conductive-cooled, 8x GbE rear, RS232 and GbE management ports, with coating

Part Number

CP3923-RC

Price

Request Quote

Manufacturer

KONTRON

Lead Time

Request Quote

Category

Network Hub / Switch / Router

Specifications

Climatic Humidity

93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)

Common

1x RS232 management port via Hirose connector, Reset button, Status LEDs, 1x per port, Hot swap LED

CompactPCI Bus Interface

PICMG 2.0 Rev. 3.0 compatible, universal 5V and 3.3V PCI signalling voltage supported

Controller

BCM56226

Dimensions

100 x 160mm, 3U

Front Interface

4x 10/100Base-T Ports via M12

Hot Swap

The board supports full hot swap capability as required by PICMG 2.1 R2.0.

MTBF

262,140 h acc. to Telcordia Issue 1, Method I Case 3, Ground Benign, controlled at 40°C

Operating Temp.

-40°C to +85°C, conduction-cooled

Power Consumption

typ. 20 W

Storage temp.

-50°C to +105°C

Weight

410g

Features

Datasheet

pdf file

Kontron-CP3923-Datashee-1776860002t.pdf

1309 KiB

Extracted Text

» » C CP P3 39 92 23 3 « « Up to 16-Port Layer2/Layer3 3U CompactPCI Switch » Fully managed layer2 and layer3 switching and routing » Leading edge technology based on BCM56226 » Front panel design with RJ45 or M12 connectors » Rugged air-cooled or conductive-cooled versions available If it’s embedded, it ’s Kontron. CP3923 CP3923 Up to 16-Port Layer2/Layer3 3U CompactPCI Switch Welcome the latest member of the 3U CompactPCI switch For applications requiring outmost mechanical stabilitiy family – the CP3923. and reliability the CP3923 is also available as rugged, conductive-cooled version (CP3923-RC). The CP3923 is a fully managed layer 2/3 Gigabit Ethernet switch offering IPv4/IPv6* routing and full management » Robust and Reliable capabilities. It supports a powerful set of CLI, Telnet, Web The careful design and selection of high temperature and SNMP management interfaces to configure the entire set resistant components together with the elaborate of protocols and parameters including Layer 2 and Layer 3 heat sink construction ensures high product reliability. (IPv4/IPv6*) protocols, Multicasting, QoS and Security. Designed with soldered components the CP3923 is able On top of that, the CP3923 maximizes the reliability of to handle the toughest environmental conditions. rugged COTS applications by supporting Intelligent Platform With respect to the transportation market the CP3923- Management (IPMI) and hot swap capabilities. 4M and the CP3923-8M are fully EN50155 compliant. The CP3923-RC fullfills are requirements of the VITA 47 environmental class ECC4. » Unique Versatility Eight GbE ports to the rear and up to eight GbE ports » Long-Term Availability to the front ensure highest connectivity capabilities. Based on chosen components from embedded roadmaps, The CP3923 is available with three different front I/O the CP3923 ensures long-term availability and therefore versions: eliminates the risk of unplanned design changes and Either with eight GbE ports via RJ45 (CP3923-8C) or for unexpected application modification. mobile- and transportation-oriented applications with four (CP3923-4M) or eight (CP3923-8M) Fast Ethernet *IPv6 support optional ports via M12-D connectors. 2 www.kontron.com CP3923 Technical Information Controller and Switch Broadcom BCM56226 Ethernet switch PowerPC® 405EX, 32-bit, RISC processor core operating up to 600 MHz NXP LPC2368 32-bit microcontroller, for IPMI 512MB DDR2 RAM 200 MHz 1GB NAND Flash for file storage Front Interfaces on Standard Boards Common 1x RS232 management port via Hirose connector Reset button Status LEDs, 1x per port Hot swap LED CP3923-8C 8x 10/100/1000Base-T ports via RJ45 CP3923-4M 4x 10/100Base-T Ports via M12 CP3923-8M 8x 10/100Base-T Ports via M12 Rear I/O via J2 The CP3923 supports: » Eight Gigabit Ethernet ports » One 10/100/1000Base-T management port » One RS232 management port CompactPCI Bus Interface PICMG 2.0 Rev. 3.0 compatible, universal 5V and 3.3V PCI signalling voltage supported Hot Swap The board supports full hot swap capability as required by PICMG 2.1 R2.0. It can be removed or inserted in a powered slot. Please refer to the PICMG 2.1 R2.0 specification for additional details. Compliancy CompactPCI® Core Specification PICMG 2.0 Rev. 3.0 CompactPCI® Hot Swap Specification PICMG 2.1 R2.0 CompactPCI® System Management Specification PICMG® 2.9 R1.0 Intelligent Platform Management Interface Specification v1.5 IEEE 802.3, 2000 ANSI/Vita 47-2005 Designed to meet or exceed: » Safety: UL 60950-1, CSA 22.2 No 60950-1, EN60950-1 » EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 61000-6-2 » EN50155 (only CP3923-4M and CP3923-8M) Software Management Management via SNMP, Telnet, CLI » In-band » Out-of-band via Ethernet or RS232 IPMI v1.5 Reliable software, field upgradable Dual boot images with roll-back capabilities Advanced management monitoring features Switching and Routing Ethernet Bridging: » Static and dynamic link aggregation, Classic, rapid and multiple spanning tree algorithms, Quality Of Service, Full Duplex operation and flow control, Layer 2 multicast services, VLAN support, IGMP and MLP snooping, Access Control Lists IP Routing:(*) » IPv4 Forwarding, ARP, ICMP, static routing, OSPF and RIP routing, Virtual router redundancy protocol (VRRP), ECMP Equal Cost Multipath routing Multicast: » IP Multicasting, IGMPv2 /v3, PIM-DM/PM, DVMRP, MLD v1/v2 Services: » SNTP client, DHCP server, Event Management, POST, SNMP, Support for multiple configurations, TFTP server, Power on and diagnostic tests (*)IPv6 support optional General Dimensions 100 x 160mm, 3U Weight CP3923-8C: 420g CP3923-4M: 410g CP3923-8M: 500g CP3923-RC: 390g MTBF CP3923-8C: 244,715 h acc. to Telcordia Issue 1, Method I Case 3, Ground Benign, controlled at 40°C CP3923-4M: 252,158 h acc. to Telcordia Issue 1, Method I Case 3, Ground Benign, controlled at 40°C CP3923-8M: 246,110 h acc. to Telcordia Issue 1, Method I Case 3, Ground Benign, controlled at 40°C CP3923-RC: 262,140 h acc. to Telcordia Issue 1, Method I Case 3, Ground Benign, controlled at 40°C Power Consumption typ. 20 W Environmental Operating Temp. CP3923-8C: -40°C to +85°C, forced system airflow required CP3923-4M/-8M: -40°C to +70°C, EN50155 TX CP3923-RC: -40°C to +85°C, conduction-cooled Storage Temp. -50°C to +105°C Climatic Humidity 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78) 3 www.kontron.com CP3923 Ordering Information Description Product Switch CP3923-8C 3U, 8HP, 8x GbE front (RJ45), 8x GbE rear, RS232 and GbE management ports 3U, 8HP, 4x Fast Ethernet front (M12), 8x GbE rear, RS232 and GbE management ports CP3923-4M 3U, 12HP, 8x Fast Ethernet front (M12), 8x GbE rear, RS232 and GbE management ports CP3923-8M CP3923-RC 3U, 4HP, conductive-cooled, 8x GbE rear, RS232 and GbE management ports, with coating Rear Transistion Module CP-RIO3-923-8C 8HP rear I/O module, 8x GbE (RJ45), RS232 and GbE management ports (RJ45) Please contact your local sales representative for further assistance concerning configuration options. PROdUCTS CP3923-RC CP3923-8C CP3923-8M CP3923-4M CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 4 www.kontron.com #CP3923# 05042011AR All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. All brand or product names are trademarks or registered trademarks of their respective owners.

Frequently asked questions

How does Industrial Trading differ from its competitors?

chervon down
Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Is there a warranty for the CP3923-RC?

chervon down
The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carrier will Industrial Trading use to ship my parts?

chervon down
We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Can I buy parts from Industrial Trading if I am outside the USA?

chervon down
Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Which payment methods does Industrial Trading accept?

chervon down
Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

KONTRON 29508 Compact PCI Network Switch - 6-port Gigabit Ethernet Switch with 5x RJ45 on the front ...

product

KONTRON 29510 Compact PCI Network Switch - 5-port Gigabit Ethernet Switch with 5x RJ45 on the front ...

product

KONTRON 31070 Compact PCI Network Switch - 5-port Gigabit Ethernet Switch with 5x RJ45 on the front ...

product

KONTRON 31281 Com[act PCI Network Switch - 6-port Gigabit Ethernet Switch with 5x RJ45 on the front ...

product

KONTRON CP342 Compact PCI Adapter - Dual Gigabit Ethernet NIC on 3U CompactPCI with 2x RJ45 to the f...

product

KONTRON CP342-E2 Dual Gigabit Ethernet NIC with 2x RJ45, for usage in E2 (-40°C to +85°C) temp. rang...