R A dvanced TCA AT8904 AdvancedTCA 10 GbE Hub board with 10 GbE AdvancedMC uplinks AdvancedTCA / AdvancedMC Open Modular Solutions Versatile Base and Fabric AdvancedTCA 10 GbE Hub > 10GbE service to redundant Hub The Kontron AT8904 10GB hub is the ideal platform for open modular-based > 10GbE service to payload slots 2-15 broadband media servers used to support Video on Demand (VoD) from a library of movies, delivered over DSL or CableTV networks, as well as VoD short > 1x 1000Base-T uplink on front videos from online service platforms, such as YouTube for example, delivered to mobile phones and wireless clients. panel > Non-blocking Layer 2 &3 switching For design engineers of media server applications, the Kontron AT8904 offers exceptional flexibility with two (2) AdvancedMC slots to host any of the fol- with VLANs lowing: processor AdvancedMC modules as main controllers; storage Advan- cedMC modules as mass storage devices for Processor AMCs; and dual 10GbE > Supports comprehensive set of uplink AMCs to interlink the Fabric. Concerning the 10GbE uplinks, Kontron IP routing and Ethernet/Bridging offers the AT8904 hub with the AM4310 Mid-Size Interlink AMC module for a protocols redundant Interlink of multiple ATCA chassis. The AM4310 provides 2 x 10GbE uplinks on the front panel via optical XFP connectors which are routed to the > AM4310 Mid-Size AMC uplink XAUI ports (ports 4-7 and 8-11) on the AMC connectors. module offers 2x 10GbE The Kontron AT8904 is designed with built-in Layer 3 routing support and connections for both available AMC non-blocking Layer 2 switching with VLANs. Its design is based on its existing slots for redundant interlink of line of AdvancedTCA hub boards which, for GbE to 10 GbE migration purposes, multiple ATCA chassis provides tremendous economies of scale and faster deployments for designers who have aleady designed applications with the Kontron AT8901 and AT8902 > IPMI v1.5 support hubs. The Kontron AT8904 supports full IPv6 routing and a line rate switching capacity of 200-Gbps which makes it the ideal hub for high traffic broadband media server network elements. If it´s Embedded, it´s Kontron. AT8904 Technical Information System Characteristics Fabric Switch Routing • Broadcom BCM56800: 20-Port 10-Gigabit Ethernet Multilayer •Redundancy of routing functionality using a second switch hub Switch. board •10-Gbps interfaces can operate at 10 GbE, 2.5GbE and 1 GbE. •IPv4 Forwarding on all channels and connected uplink ports •15 ATCA Fabric ports. •Quality of service according to the DiffServ standards •10Gbps interfaces to the AMC slot B1 •ARP for all routable interfaces •10Gbps interfaces to the AMC slot B2 •ICMP for all routable interfaces •1 10Gbps interface to the Front Fabric Uplink RJ45 operates in •OSPF routing protocol version 2 1 GbE •RIP routing protocol version 2 •Hardware Support for IPv6 Routing and Tunneling ready •VRRP (virtual router redundancy protocol) for transparent fail over •Multicast Routing/Forwarding of default routers •PCI 32bit/66MHz management interface •IGMP snooping •LED interface to CPLD on Main Board Service / Applications •Integrated XAUI™ SerDes for all 20 10-GE ports •DHCP server •Uses single SerDes lane per port at GE speeds •Onboard event management •Built-in Layer 3 routing support •Test and trace facilities •200-Gbps switching capacity at line rate •POST (power on self tests) diagnostics •Support for eight classes of service (CoS) per port •The system provides a standards based SNMP implementation •Support for Deficit Round Robin, Weighted Round Robin and Strict supporting SNMP v1, v2 and v3 for monitoring and management priority scheduling purposes •Support for a cut-through switching mode •IPMI based management of the onboard AMC slots (AMC.*) •Port trunking and remote mirroring support •Persistent storage of configuration across restarts •Fully integrated data and address memory on a single chip •Support for retrieving and installing multiple configurations •Advanced packet flow control Physical & Mechanical •Head of line blocking prevention • Size: Single slot ATCA board •Full-duplex flow control (802.3x) • Power: Under 200W (TBD) typical without AMCs •The advanced ContentAware™ engine supports ToS/DiffServ, policy • 8U form factor mechanically compliant to PICMG 3.0 and 3.1 based routing, priority tagging and remapping • 2 standard mid-size/single width AMC Slots •Line rate multifield packet classification • 280 mm x 322 mm (11.024“ x 12.677“) •Supports IEEE 802.1p, TOS/DiffServ, rate limiting, policing, priority • 1,8 kg tagging, and remapping General Compliances •Extended security and ACL filtering The AT8904 conforms to the following specifications: •Full IPv6 routing support • PICMG 3.0 AdvancedTCA Base Specification, Revision 2.0 •Enhanced security and management capabilities • PICMG 3.1 Option 1 & 9 Ethernet/Fabric for AdvancedTCA Systems •Low power consumption •AMC.0 R2.0 AMC Base Specification •Supports L2 switching with 4K VLANs, IPv4 and IPv6 full routing •AMC.2 R1.0 Gigabit Ethernet common region and 10GbE fat pipe functionality region •Implements congestion handling features such as Head- Of-Line • AMC.3 Storage common region blocking prevention and IEEE 802.3x flow control • IPMI v1.5 Intelligent Platform Management Interface Specification Software Safety •IPMI version 1.5 for board level management (PICMG 3.0) Meet or exceed: •Support for clock e-keying following AMC.0 Rev 2.0 Specification - Safety: UL 60950 -1: 2003; CSA C22.2 No 60950--1-03; EN 60950-1:2001; •Reliable field upgrades for all software components IEC60950-1 •Dual boot images with roll-back capability - EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/ •Management via SNMP and Command Line Interface EN300386 •System access via TELNET, SSH and serial line Environmental •Hot-Plug support for AMC modules Operating Storage and Transit •Redundancy support for extension fabric switch -40 to +70°C / -10 to Temperature*: 0 °C to 55 °C 158°F* •Reset of extension fabric •Modular software architecture to enable project specific 15%-90% (non-conden- 5%-95% (non-conden- Humidity*: customization sing) at 55°C (131°F) sing) at 40°C (104°F) Ethernet / Bridging Altitude*: 4000 m (13,123 ft) 15,000m / 49,212 ft •Static link aggregation (IEEE 802.3ad) on uplink ports and 30G/11 ms half sine dedicated fabric channels Shock*: 50G, 170 inches/second trapezoidal •Classic and rapid spanning tree algorithms support (IEEE 802.1D, 5 to 62Hz: 1G @ 0.25 5 to 50Hz: 0.5G @ 0.1 Vibration*: IEEE 802.1w) Octave/minute •Quality Of Service on all ports (IEEE 802.1p) •Full Duplex operation and flow control on all ports (IEEE 802.3x) 30 cfm Airflow: •Layer 2 multicast services using GARP/GMRP (IEEE 802.1p) *Meet or exceed •VLAN support including dynamic VLAN registration with GARP/GVRP (IEEE 802.1Q) MTBF is >180,000h @ 40°C, calculations based on Bellcore/Telcordia Corporate Offices SR-332 Issue 1 US/ Canada Asia Pacific Europe, Middle East & Africa 14118 Stowe Dr Far East Science Park, 2nd Floor No.2, Lane50, Oskar-von-Miller-Straße 1 85386 Eching/Munich - Germany Poway, CA 92064-7147 Nan Kang Road Section 3 Nan Kang District Taipei, Taiwan Tel.: +49 (0)8165 77 0 Tel.: (858) 677-0877 Tel: +886 2 2782 0201 Fax: (858) 677-0898 Fax: +886 2 2782 7486 Fax: +49 (0)8165 77 279 sales@us.kontron.com sales@kontron.com.tw sales@kontron.com www.kontron.com AT8904M - Doc V 1.2 - 2009 All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.