R A dvanced TCA  AT8901 AdvancedTCA Base Hub board with dual AdvancedMC support AdvancedTCA / AdvancedMC Open Modular Solutions (OMS) Highly Flexible Entry-level Base Hub PICMG 3.0 and 3.1-compliant  The Kontron AT8901 is an AdvancedTCA Base Hub board that is PICMG 3.0 and base interface (GbE) switch 3.1 compliant. Built to support two Mid-Size or Full-Size AdvancedMC modules, the AT8901 is the ideal entry-level hub platform that provides Non-blocking layer 2 / 3  maximum design flexibility. switching /routing Full Redundancy and High Availability Advanced Level 3, IPv4 & IPv6 Suitable for dual-star configurations in 14- and 16-slot systems, the AT8901  is hot swappable, supports full redundancy, Layer 2 / 3 protocols (option for Options for QoS support and  Layer 4), and provides flexible Gigabit Ethernet uplink options via front panel Jumbo Packet line rate switching and RTM. AdvancedMC-Everywhere integration for customization 4x GbE uplinks on front panel  With the support for two AdvancedMC modules, the AT8901 enables cost- Two Mid-Size OR Full-size  optimised customization for a wide assortment of application requirements. AdvancedMC slots for The AT8901 may be enhanced by various AdvancedMC modules, such as processing (acting as the system controller which saves one AdvancedTCA customisation slot); HDD as mass storage device; and I/O GbE inter-link to enable multi-shelf AdvancedTCA systems. GbE connections to AdvancedMC  slots IPMI Support The AT8901 switch board supports an intelligent hardware management Supports 14- and 16-slot  system, based on the Intelligent Platform Management Interface Specification AdvancedTCA shelves (IPMI) 1.5. The hardware management system provides the ability to manage the power, cooling and interconnect needs of intelligent devices, to monitor IPMI v1.5 support  events and to log events to a central repository. If it's embedded, it's Kontron. AT8901 Technical Information  Processor and Memory Management and Protocols Ethernet AT8901 - IBM PowerPC® 405 32-bit RISC processor core operating up to - Management via SNMP, TELNET, CLI 400MHz with 16KB I- and D-caches - In-band - PC-133 synchronus DRAM (SDRAM) interface - Out of band via Ethernet or RS232 - 40-bit interface serves 32 bits of data plus 8 check bits for ECC - IPMI version 1.5 AdvancedTCA Base Hub board applications - Ethernet/Bridging protocols include - Link aggregation (802.3ad) Ethernet - VLANs (802.1Q) - Broadcom fifth generation of StrataSwitch/StrataXGS product line with dual AdvancedMC support - Spanning tree (802.1D, 802.1w) - 24 10/100/1000 Mbps Ethernet ports - Flow control (802.3x) - Line-rate switching for all packet sizes and conditions - GVRP, GMRP - On-chip data packet memory and table memory Physical & Environmental - Advanced Fast Filter Processor (FFP) ContentAware classification - Advanced security features in hardware - Size: Single slot ATCA board - Port-trunking and mirroring supported across stack - Power: 50W typical without AMCs - Advanced packet flow control: Mechanical - Head-of-line-blocking prevention - 8U form factor mechanically compliant to PICMG 3.0 and 3.1 - Back pressure support - 2 Full-Size or Mid-Size AMC Slots - Standard compliant 802.1ad provider bridging - 280 mm x 322 mm (11.024“ x 12.677“) - IEEE 1149.1 (JTAG) boundary scan - 1,8 kg Base Interface (PICMG 3.0) General Compliances - Non-blocking layer 2 / 3 switching The AT8901 conforms to the following specifications: - 1 x GbE connection to one AMC slot - PICMG 3.0 AdvancedTCA Base Specification, Revision 2.0, and 3.1 Project Customization with AdvancedMC Slots - Mid-Size / Full-Size - AMC.0 AMC Base Specification - Processor-AMC - D0.96 of AMC.2 Revision 1.0 Gigabit Ethernet - Storage-AMC - D0.9d of AMC.3 Revision 1.0 Storage - I/O - AMC - IPMI v1.5 Intelligent Platform Management Interface Specification Interfaces on front panel Environmental - 4 X 10/100/1000Base-T Uplinks for Base Interface (B1-B4) Operating Storage and Transit - 1 X 10/100Base-T Management -40 to +70°C / -10 to 0 °C to 55 °C Temperature*: - 1 X RS232 Management 158°F* - 8 RTM Channels from each AMC Slot 15%-90% (non-conden- 15%-90% (non-conden- Humidity*: - Storage interface for HDD or Flash mass storage (SAS/SATA/FC) sing) at 55°C (131°F) sing) at 55°C (131°F) from each AMC Slot 4000 m (13,123 ft) Altitude*: 15,000m / 49,212 ft Interfaces to ATCA backplane - Zone 2 connectors 30G/11 ms half sine 50G, 170 inches/second Shock*: - Base channel 1: 1/2 x Ethernet to ShMC(s) (10/100/1000Base-T) trapezoidal - Base channels 2-16: 1 x GbE (1000Base-T) 5 to 100Hz: 1G @ 0.25 5 to 50Hz: 0.5G @ 0.1 Vibration*: Octave/minute Octave/minute - CLK 1/2/3 A/B *Meet or exceed - Update Channels: 4 x GbE (1000Base-BX) - Zone 1 connector Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/ - Power Telcordia SR-332 Issue 1 - IPMB A - IPMB B Board Management - Based on IPMI 1.5 - FRU Management - Sensors (Voltage, Current, Temperature, Fuse) - Status and Alerting - Hot Swap - Electronic Keying of Base Interfaces  Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron AG Kontron America 4F, No. 415, Ti-Ding Blvd., Oskar-von-Miller-Straße 1 Sec.2, NeiHu District 14118 Stowe Dr 85386 Eching/Munich - Germany Taipei, Taiwan 114 Poway, CA 92064-7147 Tel.: +49 (0)8165 77 0 Tel.: (858) 677-0877 Tel. +886-2-2799-2789 Fax: +49 (0)8165 77 279 Fax: (858) 677-0898 Fax +886-2-2799-7399 sales@kontron.com sales@us.kontron.com sales@kontron.com.tw www.kontron.com #AT8901#24_08_2007 All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. Kontron and the Kontron logo are registered trademarks of Kontron AG. All brand or product names are trademarks or registered trade- marks of their respective owners. RoHS compliant logo means that product will be lead-free/RoHS compliant latest by June 30th, 2006. ISO 9001:2000 Quality System Registered